A platform for a car in the country - how to make it yourself

Many summer residents want to make a parking lot on their site, at least to make parking more convenient. However, only a few of them know which type of coating is the most durable and affordable. And also how to get the job done quickly and efficiently. In this article we will look at how to make a platform for a car in the country.

Types of country parking areas

The construction of a site for a car depends on the personal desires of the summer resident and general conditions. How much a person can or wants to spend on a job is also important. You can create parking at your summer cottage without spending a lot of money.

There are seven different coatings:

• bulk parking - made of crushed stone or pebbles;
• lawn or eco-friendly parking;
• paving slabs;
• concrete;
• asphalt;
• rubber tiles;
• stone;
• lattice.

The above coatings have different performance characteristics, which is why some are cheaper, others more expensive. Some types go well together. The most inexpensive and functional is considered to be a platform for a car in a country house made of crushed stone. If you build it according to all the rules, and also use geotextiles, the crushed stone will not mix with the soil, at least in the first weeks. But if there is no geofabric, you can always add crushed stone instead, because it is sold at reasonable prices and is not difficult to find using the Internet.

Dimensional characteristics

The dimensions of the future parking lot at the dacha directly depend on how many cars are planned to be parked here permanently. Plus, this is also influenced by the size of the plot itself, since some dachas are really small, and you definitely can’t fit more than one car on the property.

Experience shows that the optimal size for one car is a platform of 3x5 meters. This is about 15 square meters. Such a zone is enough to park calmly, not to maintain the millimeter and not to press against the edges, just to avoid driving into the lawn or crushing the planted strawberries. 15 squares is enough to have access to all doors and trunk, as well as to get around the car from all sides.

Pros and cons of different options

Each type of coating has its own advantages and disadvantages. For example, a gravel parking lot can drain water on its own, so additional drainage is not needed. But perhaps a drainage system will still be needed.

Nowadays, green car parks are quite popular. Summer residents usually make not a simple lawn, but a special one, covered with a plastic lattice, which partially hides the lawn. Thanks to the correct weight distribution, this lattice structure prevents the car's wheels from falling through.

The advantage of such a car platform is that it has a large number of functions. You can relax on it, but you need to take care of it, like grass - watering, trimming. Such parking can really decorate the area, and it’s really easy to use. The disadvantage is the high cost of seeds, since special varieties of grass are required for parking.

Lawn grid for eco-parking made of concrete

Concrete lawn eco-parking on a garden plot is characterized by increased strength, which makes it possible to use it to create parking spaces for trucks.

Other positive qualities include:

• concrete lawn grating is economical, its cost is much cheaper than its plastic counterpart;
• durable and wear-resistant;
• Helps quickly get rid of excess moisture after heavy rains;

Concrete grids for eco-parking also have a number of disadvantages:

• complexity of installation and dismantling. Considering the significant weight of the structures, it will be quite difficult to work with the product without special equipment and skills.
• It heats up quite strongly in the sun, which can negatively affect the vegetation planted in the cells.

Features that can be considered both pros and cons include the clarity of the contours of the structure. They can be played up in design and made a highlight of the landscape design, but they cannot be hidden.

Choosing a parking space on the site

If you decide to build a parking lot, then first you need to choose a place that should be level. A strong slope is not suitable for parking: the vehicle will regularly need to be put on the handbrake, and limiters installed under the wheels. In addition, you will think about the safety of your car every day.

Important! The parking lot at the dacha should have a slight slope: this makes it easier to enter the site and water will not accumulate. The parking lot should be located above ground level.

Parking space dimensions

Before you build a platform for a car on your summer cottage, decide on its size. For one car, you can make a platform of 5 x 2.5 m. For large vehicles (for example, a jeep or minivan) you will need dimensions of 3.5 x 6.5 m. But if you park several cars at your summer cottage, then there should be even more space.

Water drainage

When you have decided on the dimensions, during the construction of the parking lot, resolve the issue with the drainage system. If you do not intend to do concreting, liquid may seep through the crushed stone or tiles.

If you decide to use a different material, it is better to make drainage. Its arrangement also depends on how much water stagnates in your summer cottage. If there is no drainage system, you need to sprinkle it with crushed stone, about 40 centimeters wide. Water will flow onto it and be completely absorbed into the soil.

If there is drainage, pipes must be laid along the perimeter of the parking lot 10 centimeters below the covering, and the upper part must be covered with crushed stone. The supplied pipes must be inserted into the drainage system.

Entry requirements

In addition to external design, convenience for owners and compliance with your budget, these areas in front of the house are limited by the requirements of regulatory documents and are prescribed for the purpose of safety of movement:

• opening width is at least 4.5 meters;
• if there is an adjoining road, the expansion must be at least 8 meters and provide a turning radius of 5 meters.
• the pipe used as drainage is at least 0.3 meters and at least 4 meters in length;
• The slope of the pipe in the trench must coincide with the slope of the main road;
• the entrance bordering the main highway must coincide with it at the junction.

The nature of entry into a private area should not create obstacles for road users on the main road.

Installation of curbs

When constructing a parking lot, do not forget about curb stones, they are very important and help solve several problems at once. If the platform for a car at the dacha is built from crushed stone, the fence will prevent it from crumbling. If the parking lot on the site is made of tiles, the curb will save you from sand being washed away. And the most important thing is that the site with side stones looks better.

Important! If you are going to build a garage or something similar, you can also install a small carport - a shelter that will help protect your car.

To build this building, you will need strong pipes to create a frame. And you will need to throw a tarpaulin or film over it. There is no point in making the structure high, as it will not protect the vehicle from slanting rain. The height of the frame structure should be about 2.5 m.

How to choose the optimal coating

This is the most accessible and passable area on the site. The coating used must have increased strength and wear resistance properties. An important factor when choosing is the response to climatic conditions. There should be no accumulation of water on the coating after precipitation, and it should not become limp during the off-season.

When choosing, they are guided by the nature of the climate and the expected cross-country ability of the entry zone.

Sequence of laying layers

After the final selection of a parking lot, highlight the selected dimensional characteristics of the site (taking into account the water drainage system). Then carry out everything strictly according to the plan below:

• First, remove a layer of soil 30-35 cm deep.
• Remove all unnecessary stones, roots, level the area.
• Then, using a tamper, compact the soil thoroughly.
• Lay out geofabric. It should be 0.7-1 meters larger than the parking lot. When arranging a drainage system, wrap the drainage pipe in the “excess” geofabric.
• Add a layer of sand, level it, compact it. When compacted, the layer is 10-15 cm. If you want to make the work easier, wet the sand with water.
• Add a middle layer of crushed stone.
• Place a layer of coarse gravel (20-40 mm) on the sand, level it, compact it. Its thickness is 10 centimeters when finished.
• Medium gravel layer (5-20 mm). Level, compact. Its thickness should be 10-15 centimeters.
• The next layers will depend on the type of coating used.

Typically, the size of the layers depends on the structural properties of the soil and the load. For example, for loose and unstable soils, a road mesh is laid at the bottom of the pit for stabilization.

Second option: a regular layer of geofabric is laid between sand and gravel. The bottom layer is needed to stabilize the base and stop the growth of vegetation, which will be difficult to remove on your own.

Plastix

Multifunctional plasticizing and water-reducing additive for concrete.
More details

Important!

To ensure the following characteristics of concrete: mobility P3-P4, frost resistance F150 and water resistance W6, at least 310 kg of cement CEM I/II 32.5 per 1 cubic meter of concrete is used. Recommended proportions by volume are:

1. cement - 1 part;
2. sand - 2.6 parts;
3. crushed stone - 4.5 parts.

The concrete mixture can be mixed in a concrete mixer or using a construction mixer, or even manually with a shovel.

How to calculate the amount of cement

Knowing the concrete recipe, the overall dimensions of the site and the thickness of the concrete layer, it is easy to calculate the cement consumption.

For example, the dimensions of the site are 3x6 m, and the thickness of the concrete layer is 15 cm (0.15 m). Multiplying these numbers, we get 2.7 cubic meters. That's how much concrete it will take to fill the site. However, it is usually recommended to purchase materials with a margin of 10-15%, which means that you can round up to 3 cubes. With a cement consumption of 310 kg per cubic meter, we get 930 kg of cement. An impressive amount, but if you use CemPlast and Plastix plasticizers, you can save from 90 to 140 kg of cement.

The mixture is poured and leveled using the rule along the embedded parts or beacon slats, which, for small areas, can serve as sheets or formwork boards along the edges of the area.

The thickness of the concrete layer for the site should be at least 100 mm, but usually not more than 150 mm.

Since the site for the car is operated in the open air, it will necessarily be exposed to atmospheric precipitation, which may contain aggressive chemicals. To increase the water resistance of concrete, it is advisable to use the water-repellent additive CemAqua in the concrete mixture, which ensures volumetric water-repellency of concrete. The addition of CemAqua reduces water absorption and also prevents the appearance of efflorescence and mold on the surface of concrete and increases corrosion resistance.

Important!

All Cemmix additives are compatible with each other. It is advisable to use several types of additives in concrete (for example, to increase mobility, use 70% of the dosage of CemPlast or Plastix, and to increase water resistance - 30% of the dosage of CemAqua).

When making a concrete parking lot at low temperatures (below plus 5° C), antifreeze additives for concrete may be needed. Outdoor concreting is usually done in the spring and fall, since summer can be hot and the concrete can dry out. But in our latitudes the weather can be unpredictable; it is difficult to choose a time so that during the 4 weeks required for concrete to gain strength, the air temperature is +18–22° C. If concreting is carried out at an air temperature below +5° C, CemFrio or HotIce additives will allow you to obtain high-quality durable concrete.

Curing

After laying the concrete, it is necessary to give it 28 days to gain strength. These processes occur especially quickly in the first hours and days after installation. At this time, it is necessary to ensure optimal temperature and high humidity. Therefore, for the first 2–3 days, concrete should be watered with water 2–3 times a day and covered with film. After this, you can smooth out all the irregularities. After 5–7 days you can remove the formwork.

Finishing

The edges of the platform are sometimes covered with metal corners to prevent them from breaking.

What nuances to consider in order to make a strong and durable platform:

1. To prepare the concrete mixture, only fresh cement is used. However, the use of plasticizers CemAqua, CemPlast and Plastix allows you to “reanimate” even stale cement.
2. Materials must be purchased with a reserve of 10–15%.
3. You can save at least 10% of cement without reducing the strength of concrete by using plasticizers CemAqua, CemPlast and Plastix.
4. To replace complex mesh reinforcement, you can use Cemmix polypropylene or basalt fiber.
5. If it is necessary to pour concrete at low temperatures, use antifreeze additives CemFrio and HotIce.

The use of modern additives for concrete mixtures allows you to do concrete work yourself at a professional level and obtain high-quality, beautiful and durable products, as well as save materials. You can buy fiber for concrete and other Cemmix additives in bulk from the manufacturer or in Leroy Merlin stores, as well as in retail construction networks and online stores.

You can buy CemPlast, CemBase CEMMIX without leaving your home, with discounts from 5 to 33%!!!!

Buy on Ozon
Buy on Yandex.Market

Buy on Wildberries

Buy at Leroy Merlin

Or you can find the nearest official dealer in your region on our map

← Types of concrete reinforcement: why reinforcement is required, what materials and methods are used in modern construction

How to make a porch for a concrete house →

Return to list

Comments

The nuances of building a parking lot from different materials

Under the tiles and bricks, pour coarse-grained sand or small granite chips (1-4 mm). Do not forget that for a parking lot, tiles with a thickness of at least 50 mm are required (materials from 30 mm are suitable for paths).

Concrete

So, how to make a platform for a car at your dacha with your own hands from concrete? You will have to spend a lot of time and effort on concreting. A concrete parking lot will require the installation of formwork and reinforcement. Wire mesh with a thickness of approximately 10 mm is often used as reinforcement.

From it you need to make a lattice, the pitch of which will be 15 centimeters. Pieces of wood, chipboard, and plastic are suitable as formwork structures. Above the crushed stone at a height of 15 centimeters, support structures are made and a mesh is installed on them. A concrete mixture with a layer thickness of 15 centimeters is poured on top of this base. For a parking lot designed for a large number of cars, if you perform all the manipulations yourself, you will need expansion joints.

If you decide to work with concrete, remember that the solution will take about a month to harden. It will also be necessary to water the concrete mixture during the process. Especially if it's warm outside. If you don't like to wait a long time, you can add a product that will speed up the hardening process. Remember, it is with the help of concrete that you can quickly create a durable and high-quality platform that will serve you for many years.

Preparatory stage

If you decide to make a parking space at your dacha for a car without involving specialists, that is, with your own hands, you need to study some of the features of this procedure. This way the parking will fully satisfy your expectations. Or maybe it will surpass them.

Regardless of what materials you use, the preparation stage always looks pretty much the same. Therefore, before parking your car at your dacha, perform several mandatory steps:

• Remove the layer of soil. Remove about 10-20 centimeters of the layer. This will get rid of all vegetation, which will then not break through the coating and destroy it. If there are deep roots, it is better to remove them in advance, otherwise they can create many unnecessary problems later;
• Make a pillow. It is done by filling a prepared pit with a depth of 10-20 centimeters of sand or crushed stone. Next, it needs to be thoroughly compacted. Ideally, vibrating plates are used for such purposes, but you can get by with simple compaction with your feet. You can walk something heavy over the surface, which will allow you to better press the crushed stone or sand;
• Drainage pipes are laid along the edges. It is better to install them, since during rainfall or when washing the car, water will accumulate under the car. It will be much more correct if excess water is drained.

After this, you can begin laying the coating you have chosen. Some choose it purely based on financial capabilities, others look at optimal practicality and performance characteristics.

Also, do not forget that the appearance of the parking area has its own significance, and can become a real decoration of the summer cottage, or significantly spoil it.