Apartment layout MES-84. Repair in MES-84.

Replacement of electrical wiring in a one-room apartment with connection to the electrical panel.

from 25,000 rub.

Order

Replacement of electrical wiring in a two-room apartment with connection to the electrical panel.

from 35,000 rub.

Order

Replacement of electrical wiring in a three-room apartment with connection to the electrical panel.

from 45,000 rub.

Order

Replacement of electrical wiring in the kitchen, hallway, bathroom, toilet with connection to the electrical panel.

from 8,000 rub.

Order

Price list for electrician services in houses of the MES-84 series:

Electrical wiring, replacement of wiring in a one-room apartment - estimate

Example of estimate for 1 sq.m. Total area - 40 sq. m.

Electrical installation work in a one-room apartment (1 square meter)

completed in 1 business day.

Call us: 8 (495) 960-93-41 or Request a call

Apartment layout MES-84. Repair in MES-84.

The MES-84 series was developed by the Mosenergostroy enterprise and was widely distributed. The houses in this series are fully prefabricated panel sectional residential buildings with a height of 5-16 floors. The combination of sinking and protruding planes of loggias and walls, an architecturally plastic individual solution for parapet cornices and panels, as well as an original color scheme gives the facades of the MES-84 series houses artistic expressiveness and originality. The MES-84 series project provides for floor-by-floor changes in apartment layouts, which meets market requirements and, thus, creates apartments of a wide variety of layouts.

The MES-84 series house is distinguished by increased thermal insulation of external walls, large loggias, and comfortable apartment layouts. One of the external signs is the letter “M”, which is located on the facade above some buildings and common loggias. The external walls have three layers (concrete, insulation and concrete) 34 cm thick. The internal walls and their ceilings are reinforced concrete 14-18 cm thick. The partitions are 8 cm reinforced concrete. Inter-apartment walls are load-bearing. In the houses of the MES-84 series, the external panels are lined with natural brick. Color palette: white, pink, yellow, beige, blue, brown, burgundy. The lower floors have darker tones. Brick cladding in this series can be either dark red or sand color. The roof is flat. There is also a technical floor and a technical underground where engineering structures are located.

In the MES-84 house, the design provides for a through passage, which is located on the ground floor and provides convenient access to the courtyard area. The entrances also have a special room for concierge service, a convenient ramp for wheelchairs, and two elevators are installed (there is no elevator in five-story buildings). There is a garbage chute loading valve on each floor. In sections from the 12th to 16th floors, smoke-free staircases have access to the common area, in sections of lower number of floors there are ordinary stairs, without a balcony. The house has apartments with one, two and three rooms. In the MES-84 series, the apartment layout provides for functional zoning of dwellings. All apartments have spacious loggias. Balcony doors and windows with triple glazing, which provides noise and heat insulation. Natural ventilation units are located in the bathroom and kitchen. The bathrooms are separate; three-room apartments have an additional bathroom. The ceiling height of the MES-84 series house is standard – 2.64 meters.

Are there changes coming in your life that are related to the renovation of the MES-84 apartment? and a team of professional specialists is always happy to offer you their services. We will try to save you from all the hassle associated with renovating your apartment, and we will complete everything within the agreed time frame and at the highest professional level. Our craftsmen will perform both cosmetic and major repairs of MES-84 - from project development and budgeting to delivery of the facility to the client. We will certainly make sure that this metamorphosis becomes completely hassle-free and very pleasant for you, and that the result exceeds all your expectations.

Open and hidden electrical installation in a MES-84 series house

When considering all the details, the following positive aspects of open installation can be identified:

• replacement can be carried out without subsequent repairs;
• it will take significantly less time than with hidden installation (1-2 days with specialists);
• wiring remains freely accessible
• lower cost of electrical installation in a one-room apartment.

The technique is often used if hidden installation cannot be used due to repairs already made or other circumstances. Despite the fact that the price for installing hidden electrical wiring in a one-room apartment is higher than the previous method, the technology is used much more often due to the following advantages:

• all communications are laid in grooves and sealed, that is, a hidden installation allows you to hide all communications, which has a positive effect on the interior of the room;
• higher tolerances for overload and nominally permissible currents, taking into account the same wiring cross-section, since heat transfer occurs more efficiently;
• installation using this technology is considered more practical and safe, which is especially important if there are children in the family.
• fewer safety requirements according to the PUE - not necessary to apply in all cases

Design and features of MES-84 houses

The series includes single-entry towers and multi-section buildings.

MES-84 houses are distinguished by good thermal insulation, thanks to the use of three-layer external panels (concrete-insulation-concrete) with a total thickness of 34 cm.

The internal load-bearing walls of the buildings in the series are assembled from reinforced concrete panels 14 and 18 cm thick. The partitions are reinforced concrete slabs 8 cm thick.

The floors are made of large-sized (per room) solid reinforced concrete slabs 16 cm thick.

At the entrances of houses above five floors, two elevators are installed - passenger and cargo-passenger. The garbage disposal system has a loading valve on each floor.

Staircases in buildings above 11 floors are made taking into account fire safety requirements for high-rise buildings - they are smoke-free, with access to a common loggia.

The ground floor lobby provides a through passage to the courtyard. During construction, energy-saving double-glazed windows are installed in the apartments, and the loggias are glazed.

MES-54

Electromagnetic electric pulse counter type MES-54
Purpose

The electromagnetic pulse counter MES-54 is designed for counting electrical pulses in electrical and radio equipment.

Developer: OKB of the Krasnaya Zarya plant Manufacturers: In what year the MES-54 meter was developed and put into production, as well as in what year the meters were discontinued is unknown. Presumably this year is indicated in the name of the meter, namely 1954. Presumably, MES-54 meters were replaced in 1966 by MES-66 meters. Initially, the production of MES-54 pulse counters was carried out by the Leningrad Krasnaya Zarya plant, but later production was transferred to the Kuibyshev Maslennikov plant. Electrical impulse counters MES-54 were produced according to technical specifications RS2.720.004 TU

Equipment (technique) in which the counter was used

Aerosol-gas radiometer RV-4 "Dymka", borehole flow meter DAU-3, counting and launching unit SPU-1, ten-day counting unit DP-100, scintillation portable field gamma spectrometer SP-3.

Design and principle of operation

The electromagnetic meter MES-54 consists of a brass board on which a magnetic system, a counting mechanism and a carbolite terminal block for connecting external wires are mounted. All elements of the MES-54 pulse counter are placed in a composite cylindrical housing, consisting of a base cast from aluminum and a casing also made of aluminum. The body is primed with black primer and painted with gray hammer-effect enamel. Previously, MES-54 meters were painted with black enamel with a moiré effect. The board with a magnetic system and a counting mechanism is attached to the base using 4 screws. There is a glass window in the front part of the base for reading readings. The glass is glued to the base and secured on the inside with a split bronze washer. The casing is held on the base by 2 screws. The meter is attached to the equipment panel with 4 screws using the ears on the case. The magnetic system of the MES-54 meter is polarized, it is practically the same as that of the polarized relays of the RP series (RP-3, RP-4, RP-5, RP-5), and consists of a horseshoe-shaped magnetic circuit with a plastic coil containing one winding, armature and permanent magnet. All elements of the magnetic system are mounted on a supporting body made of non-magnetic material, and the permanent magnet is cast integrally with it. The relay armature consists of two brackets. On one side, the brackets are welded by turning welding, and on the other side, a return spring is clamped between the brackets using two screws. The second end of the return spring is sandwiched between two brass angles, which are screwed to the supporting body. Thanks to this fastening of the return spring, it performs two functions: it fixes the armature in a suspended state and returns it to its original position after de-energizing the winding. The anchor is equipped with a pawl that is in constant engagement with the ratchet. The ratchet, in turn, is fixed to the drive axis of the counting mechanism gearbox.

Figure 1. Design of the MES-54 electromagnetic electric pulse counter. 1 – return button; 2 – gearbox; 3 – dog; 4 – anchor; 5 – magnetic circuit; 6 – coil with winding; 7 – supporting body of the magnetic system; 8 – terminal block; 9 – casing; 10 – brass board; 11 – base; 12 – ratchet wheel; 13 – driving axle; 14 – arrow for counting hundreds of pulses; 15 – scale of hundreds of pulses; 16 – device type; 17 – logo of the manufacturer; 18 – pulse unit counting arrow; 19 – dial; 20 – impulse unit scale.

The MES-54 counting mechanism consists of a ratchet mechanism, a gearbox, a dial with arrows for counting units and hundreds of pulses, and a mechanism for resetting the counter readings. The counter dial is made of aluminum and contains two dial scales on the front side. The unit scale (from 0 to 100) is located on the outer circle; the unit scale division value is 1 pulse. The hundreds scale (from 0 to 10) is located at the top of the dial between the numbers 90 and 10 of the units scale; the division value of the hundreds scale is 100 pulse. In addition to the scales, the dial also contains the type of counter and the logo (trademark) of the manufacturer. The counter's counting mechanism is lubricated with OKB-122-4 instrument oil (TU MHP 4216-55). The electromagnetic counter of electrical impulses MES-54 works as follows. When a current pulse is applied to the winding of the magnetic system, the armature is attracted to the opposite pole of the magnetic circuit, and the pawl attached to the armature jumps to one tooth of the ratchet wheel. When the current pulse is removed from the winding, the armature, due to the return spring, returns to its original position, while the pawl on the return stroke of the armature turns the ratchet wheel by one tooth, and the gearbox rotates the axis of the arrows for counting units and hundreds of pulses. Thus, the counting of pulses will continue as long as current pulses enter the counter winding. At the end of counting the pulses and taking readings, the arrows return to the zero position by pressing the return button located on the body.

Brief technical specifications

Operation current: 5 - 10 mA Counter capacity: 1000 pulses Dimensions: 71 x 63 x 117 mm (H x W x D) Weight: no more than 450 g

Additional information (sources of information)

1. Form for a meter type MES-54, 1964 (DjVu, 40 kB.)