Damper tape for floor screed: types and installation

Changes in temperature and humidity can negatively affect a seemingly quite durable construction covering - screed, which is necessary to level the floor and correct various defects on its surface. This layer, under the influence of external factors, begins to expand, which creates a certain pressure on the screed itself and the walls of the room. As a result, the integrity of this part of the floor may be compromised. But any hardware store has something that will prevent damage to the cement screed when exposed to various factors - this is a damper tape for floor screed. What is it and how is it used?

Damper tape for floor screed

What is a damper tape and why is it needed?

Expansion of the cement screed - this phenomenon does occur and can cause a lot of harm if the screed was not done correctly. Due to the processes taking place, the screed itself may become cracked or cause damage to other building structures.

Defects in screeds - cracks

Attention! The thermal expansion of a standard, almost universally used sand and cement screed is about 0.5 mm per linear meter. This is quite a lot, considering the hardness of the walls of the room in which this work was carried out.

Cracks in the screed due to expansion

This is why it is necessary to use a damper tape when creating a screed. The latter is a long strip wound into a roll and made of polyethylene foam. The material is soft, plastic, easily compressed under external pressure, and it is precisely due to this that it is able to nullify the expansion of the concrete screed. The damper tape serves as a kind of shock-absorbing layer between the screed and the walls, protecting them from mutual destruction as a result of the resulting pressure.

Damper tape for underfloor heating screed Isolon, 8 mm x 150 mm x 50 m

On a note! Damper tape can also be called buffer, edge, compensation. And its main name comes from the German word Dämpfer, which translates as “silencer”. Thus, the material fully justifies its name.

The expansion tape also provides additional heat and sound insulation and is used as a expansion material and separator when pouring large areas.

Why is damper tape needed?

damper tape for screed

Recommendations for selection

Damper tape is an ideal object for counterfeiting. A student can print (download and then print on a color printer) the insert. Cutting the tape itself from the roll backing is just as easy. Roll it up and seal it in cellophane - no problem. Therefore, when shopping for goods, you need to study some nuances.

• While at home, you need to decide on the width and thickness of the tape, as well as its appearance.
• The tape must be in undamaged packaging, box (packed by European manufacturers) or film. This will protect you from many troubles.
• If the packaging is damaged, the following steps should be taken:

1. ask to see a certificate of conformity;
2. check the density of the bay, especially a large one - they could rewind ten meters;
3. make sure the strip is intact, and if there is a skirt, then that too. If there is damage, even at a discount, it is better to refuse the purchase.

• The self-adhesive tape should not have partial peeling of the protective strip - the glue has lost its properties.
• The thickness should be the same along the entire length, which is clearly visible on both sides of the bay.
• The cutting line must be perfect. Irregularities indicate a fake.
• Dirt on the surface is not allowed.
• Preference should be given to trusted manufacturers.

Advantages of damper tape

Buffer tape does its job perfectly and has a lot of advantages. It is precisely due to the special properties of the material from which the tape is made that it cannot be fully replaced by other materials.

Correct application of the damper tape is a prerequisite when pouring the floor

Advantages of buffer tape:

• sufficient softness and plasticity to perform its functions - foamed polyethylene easily wrinkles and then restores its shape if necessary;
• excellent thermal insulation properties. This feature reduces heat leakage through the joints between walls;
• high sound insulation rate;
• environmental friendliness and complete safety for human health;
• the ability to provide waterproofing in installation areas;
• durability and strength of the material;
• ease;
• high resistance to external factors;
• complete resistance to biological factors - polyethylene does not rot, fungi and other parasites do not settle on it;
• very simple installation method.

Laying damper tape for floor screed

The only disadvantage of damper tape is its high cost. Using tape in repairs and construction can cause a serious blow to the budget. But, due to its advantages, this material is quite often used for repairing premises for various purposes - from residential to industrial. The damper tape does not have any negative reviews.

Self-adhesive damper tape

Additional Buffer Tape Features

As a rule, compensation tape is installed only around the perimeter of the rooms when installing the screed. However, it can also be used for other jobs - all of which are related to the floor. For example, expansion tape is often used as a barrier to spreading mortar, or as a separator if the screed has a large area. However, when installing a self-leveling floor, such a tape does not need to be used.

Damper tape - a panacea for cracking (destruction) of concrete

Damper tape can be used not only for internal, but also for external work. For example, when constructing a blind area. It will protect concrete from cracking during sudden temperature fluctuations. In this case, the tape is laid in the expansion joint between the blind area and the wall.

The process of creating a concrete blind area

Video - Floor filling technology

Adviсe

When using reinforced tape you need:

• monitor the humidity in the room;
• room temperature 10 degrees, not lower;
• while work is being done with the tape, there should be no air movement (drafts);
• Before attaching the tape to the joint of the plasterboard, you should make sure that the plasterboard structure is strong; if it is “flimsy”, the reinforcing tape will not help.

To seal large boundaries and large cracks, it is best to take high-quality and wide Kurt tape, which, when applied, will cover a large area on the sides, thereby improving the quality of the repair work.

What should you consider when purchasing damper tape?

Demand creates supply, and therefore in the construction market there is now a large selection of damper tapes from various manufacturers. They differ from each other in technical characteristics, appearance, and price. Due to the fact that the market offers a large selection, it is not easy to settle on the tape of any one manufacturer. You will have to study the proposed options and choose the best one with the optimal price-quality ratio.

Choosing the right damper tape

First, you should get acquainted with the form in which the damper tape is sold. It is sold in rolls, which are easy to transport due to their lightness and relative compactness. This aspect is also useful when installing the material - you don’t need to cut anything.

On a note! The cost of one roll usually varies between 500 rubles, although there are more expensive types. When decorating a small room, the costs will not be large, but for large rooms and halls you will have to purchase a lot of tape. When drawing up an estimate, it is better to immediately include the tape in the list of required materials.

Despite its resistance to external factors, the material should be stored in dry rooms at room temperature. In this case, the tape must be wound into a roll.

Compensation tape on a roll

Attention! During transportation, it is advisable to avoid severe mechanical damage and impact on the tape - these factors can worsen the performance properties of the material.

Damper tape in a heated floor system

When choosing a tape, you should pay attention to the following parameters.

1. Integrity and absence of deformation . The tape should be smooth and neat. Damaged tape should not be purchased.
2. Appearance . The tape must be clean, free from stains and defects.
3. Roll density . If there are delaminations or cracks in the roll, then there is a risk that the adhesive surface is damaged and unusable.

You should not give preference to a tape that is cheaper but has defects. As a result, the quality of all screed installation work may ultimately suffer.

Tape laying process

Possible alternative

During installation and operation, a number of problems and difficulties may arise. In most cases, this is due to insufficient preparation of the premises. To minimize technology violations, it is recommended to familiarize yourself with the advice of specialists.

Often the factory tape may not be available. But to ensure the safety of the coating, its closest analogue should be installed. How to replace the damper tape in this case? The main selection criterion is the material of manufacture. Foamed polyethylene can be replaced with similar polymer compositions.

Most often, penofol is used for this. Its main disadvantage is its small thickness, which cannot provide the required minimum clearance. The multilayer gasket option will be impractical. Over time, the layers may lose their original location, resulting in changes in thickness in certain areas.

Installation of wooden blocks is also not recommended. They have the following disadvantages, which will be reflected in the properties of the entire coating:

• Changes in geometry under the influence of humidity. Fibers have the ability to absorb water;
• Possibility of mold and mildew. This is characteristic of almost all natural materials;
• Short service life due to the factors described above.

The alternative material must have sufficient flexibility, but at the same time return to its original dimensions after the end of exposure to the surface. Installing foam edges will not produce the desired result.

Cost and manufacturers

The most popular manufacturers of tapes, which have earned the trust of the buyer and are used by construction companies, are known to most from other products for repair. These are Knauff and Energoflex.

Edge damping tape 100 mm x 20 m

Table. Characteristics of Knauff, Energoflex and Leroy Merlen tapes.

Knauf damper tape

SoundGuard Band Rubber, 50 mm

Damping tape SoundGuard Vibro EcoRoll

Energofloor damper tape

Prices for damper tape VALTEC

Valtec damper tape

Typical sizes

There are several standard sizes on the basis of which compensation tape is produced. The best option is considered to be products with a width of about 15 cm and a thickness in the range from 4 to 10 mm, sold in rolls of 50 meters.

It is recommended to select the width of the tape taking into account the thickness of the future concrete layer. During the rough pouring of concrete, a 10 cm wide strip is sufficient, and for a thicker screed it is recommended to use 15 cm wide strips.

In order to form a wall joint of the required size , it is necessary at the preparatory stage to take into account the area of ​​cement pouring and possible temperature changes characteristic of the room.

Installation of damper tape for screed

Installation of the damper tape begins before the concrete screed is poured. It is laid along the perimeter of the room. If there are columns, material will be laid around them.

Let's start installing the damper tape

Table. Laying damper tape with your own hands.

After completing the installation of the damper tape, you can walk over it with a roller to seal the connection between the material and the wall. If the screed area exceeds 10 m2, then it is advisable to divide it into separate sectors. In this case, the principle of installing the tape does not change.

Installation of expansion joints in floor screed

Video - Installation of damper tape

Table. Installation of dry screed using damper tape.

What can be replaced

In general, damper tape is not the cheapest material. It is quite possible to find materials with the same properties, but cheaper. Without a skirt and an adhesive layer, but this is advanced functionality. If your budget is limited, you can replace the edge damper tape:

• polyethylene backing for the laminate, cut into strips of the required width;
• rubber band;
• old linoleum;
• penofol cut into strips.

If you are pouring screed over joists, you also need damper tape.
There is another cheap option. Instead of damper tape, use thin wooden strips wrapped in plastic film. After the concrete has set, they are removed. A void can be left, or it can be filled.

How to fill the seam

In general, damper tape is a consumable material. That is, it is not removed from the screed and is not reused. But if you don't like the idea, you can delete it. And so that the gap does not fill with debris and insects do not live in it, it is filled with silicone sealant, which remains elastic after drying. But this option cannot be called cheap. The high consumption of expensive silicone makes savings irrelevant.

Buffer/damper/edge/edge floor tape for screed: how to install it

You can fill the gap with foam. Cut off the excess after hardening, but not to the level with the coating or screed, but a little deeper. Apply the same silicone on top. And the elasticity will remain, and there will be no gaps, and debris/insects will not annoy.

How and with what to cut

Most substitutes for damper tape are rolled materials. They can be cut into strips of the required width. If you need to be more or less careful, take a board, a sharp knife and a long ruler. Roll out the substrate, Izolon or other selected material. We lay a board under it along the edge. Place a ruler at the required distance from the edge and cut.

Ready for further work

To speed up the process, we fold the material in several layers, and then everything is the same. We put the board down, apply a ruler and cut along it. But we try to cut through all the layers at once down to the wood. It doesn't work out very nicely, but it's much faster.

Another way is to hang it with scissors. But this is not ideal at all, so you can do what is necessary. It’s also long and tedious, especially if you have to cut it for the whole apartment or house. The total is more than a hundred meters. So be patient. You can speed it up by sawing with a saw. If you are not a perfectionist, this is a great way.

Methods for attaching edge strips

The damper tape must be fixed during installation. But if it does not have an adhesive strip, then alternative fastening methods can be used.

1. A furniture stapler and staples will allow you to secure the tape to walls made of foam or aerated concrete, as well as wood.
2. Self-tapping screws, dowels, hammer drill and screwdriver . Not the best option, since the tightness of the material is severely compromised. A method suitable for brick walls.
3. Liquid Nails . Suitable for poorly leveled walls.
4. Masking tape will allow you to temporarily fix the tape while you pour the screed.

Damper tape when installing heated floors