How to make a swing with your own hands from different materials

If for children a swing of the simplest design is enough - two suspensions with a wooden crossbar and so that it flies higher, then adults want comfort. Garden swings for adults are more reminiscent of garden furniture, a hanging sofa on an independent frame. No one is going to take off into the skies like a child, but for a pleasant relaxation in the open air, this is it. Purchased garden swings are quite expensive, while when you make them yourself, the material costs are several times lower. In this article, users of the FORUMHOUSE portal share with everyone their experience of making homemade garden swings with a canopy and in the open air.

Metal swing

Design Features

Of all the variety of swings, the greatest reliability, safety and durability are provided by metal structures with a welded or prefabricated frame. The first option is more reliable; in the second case, periodic checking of connections and, if necessary, tightening of fasteners is required.

There are two types of steel swings:

stationary, with concreted supports;
portable (hanging), with a rigid bottom frame.

Additionally, a wooden seat made of several slats or boards is fixed, and a soft mattress is laid. Most often, garden models are installed for quiet relaxation with the family, but ordinary swings for children are also in demand.

Hanging models

Before you make a swing with your own hands from metal, you need to note the compactness of the hanging models. This allows you to reinstall them throughout your garden. The most common design is a rope or chain with a board seat attached to it. They do not require a base, because any tree with strong branches or other suitable support is sufficient for hanging.

Hanging swing Source www.kinder-domik.ru

At the request of the owner, the hanging swing is hung on a chain or a reliable rope. They are secured without damaging the bark - on a sliding knot that provides good adhesion.

Before you make a children's swing with your own hands, you need to choose a chain or rope of the required thickness, a wooden seat, and prepare a drill. In the middle part of the board, holes with a circumference of 7-9 mm are drilled at both edges, and the suspension is passed through them. The rope is tied on the reverse side with a strong, wide knot, and the chain is secured with a bolt.

The work is not difficult, but requires some skill in handling power tools. In addition, modern “factory” hanging swings look aesthetically attractive and their cost is affordable for any summer resident.

Modern garden swing Source komodiki.ru

Stationary options

The design of stationary swings is somewhat more complicated, but such models are in demand because they allow you to place seats for 2-3 people at once.

Before making a stationary type garden swing, it is necessary to make a metal frame, which is the supporting structure. It is he who will perceive and withstand all loads. No less attention should be paid to securing the hangers to the top of the frame. It could be:

Spring-loaded. It functions both as a fastening element and at the same time serves as a shock absorber. To fix the spring on the frame, you should prepare in advance an eyelet that is welded to the end beam.
Koltsev. A mounting pad or an anchor with a ring is often used. You need to drill the cross beam, insert the fastener and tighten the nuts.

Stationary swings are securely dug into the ground Source stroy-podskazka.ru

How to make a cocoon swing

The cocoon swing is a unique shape and the fact that it evokes a feeling, an association with secluded relaxation.

A cocoon is made from different materials:

welded, prefabricated metal structures;
bent plastic, polypropylene pipes;
rattan, wicker;
natural synthetic twine.

This is not the entire list of materials from which the cocoon is made. The main thing is to make a strong frame. Metal hoops and arcs are decorated with different means. The metal is treated with coloring compounds and wrapped with twine or woven material. The main thing is to approach your work creatively.

Swings made of profile pipes

Types of material

Before making a garden swing with your own hands from a profile pipe, you need to analyze the types of material and determine for which parts they can be used:

Oval (round). Needed to create curved parts (armrests, arched elements, seats).
Rectangular section. They are characterized by high load-bearing capacity; they are used to create braces and vertical elements.
Flat. They are used for constructing auxiliary elements, for example, horizontal braces.

Types of pipes Source pbs.twimg.com

Bench swing

Before you make a garden swing with your own hands, you need to understand the specifics of the future design:

swings are constructed both for permanent installation and mobile;
portable models do not require a foundation - the base itself is a strong support;
for a fixed swing, a columnar base is recommended;
Often the structure is covered with a polycarbonate canopy or a stretched awning - to provide shelter from the rays of the sun and light rain.

Welded swing Source pinterest.it
The construction of a swing-bench from a profiled pipe is divided into several stages.

First, are cut . For the end supports, 4 cuts of 2.5 m are needed, for the crossbar - a cut of 2.1 m.

Cutting parts Source montazh-saidinga.ru

The upper edges of the supports are cut at 30°. The supports are mated by welding so that an equilateral triangle is formed.

Welding side posts Source nealstroy.ru
See also: Catalog of garden house projects

From the top point of each rack, is set aside and a horizontal cross member 1035 mm long is welded, designed to increase the rigidity of the frame.
is welded to the ends of the vertical supports , to which the seat will subsequently be attached. Between the legs in the shape of the letter “A” a distance of 2000 mm should be maintained, the protrusion of the crossbar on either side should be 50 mm.

Welding the horizontal crossbar Source twoidvor.com

Standard bars are used for the bench . For example, 30x30x6000 mm, shortened to 1500 mm, you will need 24 pieces. The bars are sanded using a machine or using sandpaper by hand.

Making a bench Source twoidvor.com

To prevent wood rotting, a paint and varnish coating is applied .

Coloring bars Source twoidvor.com

Next, the bench frame is assembled from 15 mm pipe. The sections are welded, bars are attached to them using bolts at a distance of 20-25 mm. To secure the chain, eye nuts are welded along the edges of the frame.
The seat is attached to vertical supports. Through holes are arranged in the transverse beam for inserting bolts with eye nuts. The bolts are passed and tightened, the chain is attached through carabiners.

Fastening the chain Source tvoidvor.com
Making a swing-bench will not cause any difficulties for experienced craftsmen who know how to handle not only welding, but also carpentry machines. In domestic conditions, at the dacha, it will be more difficult to cope with the task. Swings of this type can easily be seen in hypermarkets or on the market - many manufacturers are involved in their production, and their cost is relatively low. Therefore, before you make a swing at your dacha with your own hands, you can examine a huge number of ready-made and already assembled ones.

See also: Contacts of construction companies that specialize in the development and installation of playgrounds

Rules for safe holidays

When using the swing, the following safety precautions must be observed:

Do not exceed the permissible load on the mechanism. This can lead to distortion and breakage of the structure;
It is not recommended to swing too much on the swing, as it may tip over or fail;
It is not recommended to sit on the product too sharply. This will lead to a violation of the strength of its foundation. It is also prohibited to jump or rock the seat from side to side on such products.

In conclusion, it is worth noting that garden swings with bearings can cause a lot of delight not only among small users, but also among adults. With them you can remember your childhood, swinging high or just relaxing in the garden on warm summer evenings.

Garden swing made of wood

Peculiarities

The advantages include:

versatility and practicality;
environmental cleanliness;
harmonious combination with any natural or artificial landscape;
safety and low risk of injury;
ease of installation;
efficiency.

Before making a wooden swing with your own hands, it is worth considering that the beams and boards require treatment with an antiseptic to protect against the appearance of mold and rot. The structures must be installed under some kind of canopy to reduce the impact of atmospheric factors.

Wooden swing Source bouw.ru

Varieties of swings

Depending on their purpose, wooden attractions are divided into:

Models for children . The main requirement is safety. During manufacture, protection elements are provided that are used to prevent the child from falling - a partition on the bench, a well-fixed backrest, and belts.

Swings for kids Source ok-berta.ru

Models for family time . They are distinguished by the presence of a long sofa, which can accommodate up to 5 people at the same time. They are usually equipped with a canopy that protects the structure itself and people from the sun and precipitation.
Portable models that are lightweight and compact. They can be hung in any suitable place, easily assembled and unfolded, and placed in the trunk of a car.

Care and operation

When caring for a garden swing, it is recommended:

choose the right place to install them. If the product is intended for children, all safety measures must be taken;
when installing a swing, it is necessary to provide for the presence of free space (at least 2 meters in front of the swing and behind);
if the structure cannot be installed in the shade, think about how to protect yourself or children from the scorching sun or rain (perhaps you can build a canopy or canopy over the product);
once a year it is necessary to do maintenance. inspect the structure and lubricate all working units and hinges;
if there are textiles or soft elements on the product, they must be periodically removed and washed;
wooden surfaces are annually coated with antiseptics and every few years - with paints and varnishes;
metal parts of outdoor swings are treated with anti-corrosion agents once a year.

With proper care of the product and careful use, the swing will serve its owners for many years, bringing a lot of pleasure to both children and adults.

Making a wooden swing

Before you make a swing with your own hands for children and adults, you should choose a place to place the structure. Traditionally, the courtyard behind the house is considered the quietest and most comfortable, suitable for relaxation, children's fun and feasts with friends.

Most often, swings are installed in the backyard Source zest4leisuredirect.co.uk

Wooden swings are made in several stages.

Manufacturing of racks . The supports, pre-cut to the required dimensions, are connected in the form of the letter “A”. The connection is rigid, therefore it is recommended to use furniture bolts with washers.
Marking and securing the side rails . When marking the main rack supports, it is necessary to take into account that the stationary swing is buried 0.5-0.7 m into the ground. The underground part must be treated with waste oil or bitumen to avoid rotting. To increase the reliability and rigidity of the structure, the supports can be concreted. The above-ground part is divided into three equal sections; jumpers are attached to each side of the main support with self-tapping screws.

The supports are buried in the ground Source img-fotki.yandex.ru

Types, sizes, design features

By variety, swings on bearings are divided into:

Adults . These can be structures in the form of benches or sofas. It’s nice to relax on them on summer evenings with a book or a cup of coffee;
Children's . Designed for active swinging. They are compact, stable and simple in design.

As for the types of structures, swings can be: single, double, family. By showing a full flight of imagination, you can build a convenient and practical model of a garden swing that will harmoniously fit into the landscape design and become its bright accent.

Swing "nest"

The main element of such a swing, the “nest”, is a round wicker seat that can accommodate one adult or 2-3 children. Despite its apparent simplicity, the suspension of this attraction requires the use of strong ropes.

Swing-nest Source mastervdome.com

Before making a children's swing, you need to create a textile or wicker “nest”. If the design is intended only for children, then ordinary hoops for gymnastics are used as the frame. For adults, you will need to use a pipe with a diameter of 16 mm, bent in the form of a circle on a pipe bender, and the joint must be welded. Cables are attached to the base, and the circle is braided using the macrame or “dream catcher” technique. The laces are pulled tight, the frame itself is finished with soft fabric or foam rubber.

To create a support, a beam or profile pipe is used. First, two side racks in the shape of the letter “A” are assembled. If permanent placement is planned, then the sidewalls are buried in the ground. Between the supports you should maintain a distance equal to the height of the frame. At the top, the supports are connected by a pipe, to which a “nest” is attached through suspensions made of chains, cables or ropes. To prevent abrasion of the surfaces, a gasket made of wear-resistant material is placed under the hangers. The seat is attached to the chains using carabiners.

Fastening the “socket” Source shoppingator.ru

Useful tips

To create a durable and maximally safe product, you need to follow the right steps:

Use metal chains for hanging. They are more aesthetically pleasing and much stronger than rope.
The dimensions of the support are no less than 250 x 150 cm.
The most stable supports are made in the form of the letter A.
If you weld crossbars at the bottom of such racks, they are not concreted and can be moved to another place.
A swing with one seat is made for children. Chains should have fine grain for the safety of the child.
It is necessary to treat such a structure before painting.
The best option for painting is auto enamel; it reliably protects against rust.
Plugs are placed on the holes to protect them from water.
Concreting is best done with M400 cement.

After complete readiness, the swing is covered with protective agents: paint or varnish Source novinkimebeli.ru

Tire swing

To build a swing, you need to have a tire of suitable size, chains or ropes and several bolts. Holes are made in the tire and the bolts required to secure the chains are placed in them. The structure can be hooked onto any strong crossbar. The swing can hold 2-3 children or an adult weighing up to 120 kg.

Tire swing Source sadrium.ru

Model on a support

Such a swing is made in the form of a cocoon standing on a support. It is made from reinforcement or purchased in a store.

Key points in preparation:

The structure must be firmly fixed, preferably concreted.
The product is not selected very high
It is necessary to correctly calculate the size and quantity of materials.

The width of the bench should be 40–60 cm per person, the height of the future seat should be 50 cm.

Distance from seat to side support:

for chain hangers 3 cm;
for rope – 4 cm.

One strong support is installed for the cocoon swing Source kertas.yola.access.ly

Pallet swing

An attraction made from pallets in the form of a sofa is a simple but extremely comfortable option. Before making a swing, you need to remove any debris on the pallets and pull out the nails.

Drawing of a swing Source twoidvor.com

The dimensions of the swing, according to the figure, are 3.0 x 3.0 m. To assemble the A-shaped posts, you will need 4 beams, set on both sides at 30°.

The operating procedure is as follows.

Pallets are cut with a jigsaw.

Cutting pallets Source 2.bp.blogspot.com
Parts of pallets are fastened together with nails. If two pallets are used at once to assemble the seat, then it is necessary to provide supporting beams secured from below. They will bear the weight of people.

Connecting parts of pallets Source i0.wp.com

To make the armrests, 4 bars of 80x35 mm are used, which are nailed to the seat on both sides. A pre-sanded board is fixed on top of each armrest. The eye bolts required to attach the chain hangers are immediately screwed on.

Finished seat Source i.pinimg.com

To construct vertical support columns, the edges of both inclined beams are cut off, and a horizontal beam is placed in the center. The elements are fastened with bolts. The edges of the cross beam are reinforced with metal corners.

Support pillars Source i2.wp.com/tvoidvor.com

How to make a swing in the country: photos, drawings, sizes and modifications

A homemade swing will be an excellent addition to any summer cottage. They will help make outdoor recreation comfortable and cozy, will delight both children and adults, will allow them to enjoy the flight, and will lift their spirits. A homemade structure will be a source of pride for its owner, testify to his good taste, and decorate the area.

Note! If you have decided to start creating a swing at your summer cottage yourself, first of all you should decide on the type of structure you want to install and determine a suitable place to place it.

To facilitate and speed up the design and preparation stage, use a photo of a swing for a summer house, there are many drawings of which on the Internet.

What do you need to consider?

To make a swing for a summer house, be sure to take into account the purpose of the structure - for adults or for children. The difference is due not only to the issue of security, but also to the variation in capabilities.

The greater the weight of a person, the higher the load exerted on the structure, and, therefore, the product has to be strengthened. Equally important is the material of manufacture. The swing can be wooden, metal or made from improvised materials.

Cables, ropes, chains and fastenings are involved. The advantage of metal is reliability, but the disadvantage is susceptibility to corrosion and the need to use a welding machine. DIY metal swing with a canopy.

Making such a design, if you have drawings of a garden swing and some experience in welding, does not seem difficult. The process consists of two stages: preparatory work; assembly of the structure. Each one is of utmost importance.

Frame

The side pipes are cut out. Their sizes must match. They are connected in pairs at the top. You get two sidewalls in the shape of the letter “L”. The sharp ends are filed at the same level.

Otherwise, the horizontal beam will not lie flat. The short and long sides of the base are welded to the side posts, and the top horizontal crossbar is welded to the tops of the triangles.

Installation

The final stage in the construction of a country swing. The stability of the product depends on it. To ensure that the structure is securely installed, holes are dug with a depth of 75-80 cm.

DIY playground - 110 photos and a review of the best ideas on how and what to build a playground from
Do-it-yourself landscape design - expert advice and practical guidance on applying the current style (115 photos)
How to decorate your yard with your own hands? Landscape design and simple landscaping ideas (110 photos and videos)

A pillow is placed at the bottom. It is made of crushed stone and sand with a thickness of 20 cm. Next, the racks are installed. The free space is filled with earth or filled with cement mortar. The last option is preferable. The tie does not allow the racks to become loose even under significant loads.

Seat

The base is made of two frames 2000x500 mm, and the back is made of one 2000x650 mm. The stiffeners are fastened. The connection is made with self-tapping screws and corners. The seat can be covered using facing boards. This finishing option is considered the most preferable.

It allows you to provide an aesthetic appearance and increase the level of comfort of the product. Hanging of the product is carried out using eye bolts, which are screwed into the upper part of the seat. The chain is adjustable in length.