Prices for glazing a loggia in a house 1- LG 602 series

Replacement of electrical wiring in a one-room apartment with connection to the electrical panel.

from 25,000 rub.

Order

Replacement of electrical wiring in a two-room apartment with connection to the electrical panel.

from 35,000 rub.

Order

Replacement of electrical wiring in a three-room apartment with connection to the electrical panel.

from 45,000 rub.

Order

Replacement of electrical wiring in the kitchen, hallway, bathroom, toilet with connection to the electrical panel.

from 8,000 rub.

Order

Price list for electrician services in houses of the 1-LG-602 series:

Electrical wiring, replacement of wiring in a one-room apartment - estimate

Example of estimate for 1 sq.m. Total area - 40 sq. m.

Electrical installation work in a one-room apartment (1 square meter)

completed in 1 business day.

Call us: 8 (495) 960-93-41 or Request a call

Description[ | ]

Compared to the predecessor of the series - 1LG-502, houses of the 602nd series received elevators (load capacity 400 kg, old 320 kg) and garbage chutes, grew to nine floors, and single-frame windows in the entrances were replaced with three-frame ones. The direct predecessor of the 602 series is the 9/10-storey building of the 502 series at 156 Sedova Street, which is similar to both the 602 series and the 1-528KP40 series. The design of the staircase and elevator unit made it possible to place four apartments and a total of ten living rooms on the floor.

There are loggias at both ends of the house. Since 1971, they have been built with rotating sections.

The color range of panels has been expanded. The facades have become more plastic and expressive. The projects involve the use of new finishing materials - ceramics, glass tiles, polymers. The houses were faced mainly with matte beige tiles, some houses on Podvoisky Street and Solidarity Avenue were lined with blue tiles, on Lunacharsky Avenue, 76, the ninth floor was lined with red tiles, the rest with white tiles. There is no technical floor.

One of the successes of the designers is the bright landings with a window elongated in a horizontal plane. Houses of series 1-602 are cold, the thickness of the outer wall is about 35 cm. The height of the living quarters is 250 cm. There are 4 apartments on the staircase of one floor.

Among the disadvantages are the impossibility of redevelopment and through-hole sockets between apartments. After moving the sockets, the sound insulation is inferior to brick houses, but in general it is better than in houses with thinner inter-apartment walls.

In 1973 and 1977, two 18-story dotted houses were built on Oktyabrskaya Embankment near the Volodarsky Bridge, built from panels of the 602 series. In these houses, the 2nd floor is technical, and the height of the ceilings in the corridors of the 1st and 18th floors is increased.

Typical projects[ | ]

• 1LG-602V-6
  - 6 entrances, 216 apartments
• 1LG-602V-7
  - 7 entrances, 252 apartments
• 1LG-602V-8
  - 8 entrances, 288 apartments
• 1LG-602V-9
  - 9 entrances, 324 apartments

Open and hidden electrical installation in a house series 1-LG-602

When considering all the details, the following positive aspects of open installation can be identified:

• replacement can be carried out without subsequent repairs;
• it will take significantly less time than with hidden installation (1-2 days with specialists);
• wiring remains freely accessible
• lower cost of electrical installation in a one-room apartment.

The technique is often used if hidden installation cannot be used due to repairs already made or other circumstances. Despite the fact that the price for installing hidden electrical wiring in a one-room apartment is higher than the previous method, the technology is used much more often due to the following advantages:

• all communications are laid in grooves and sealed, that is, a hidden installation allows you to hide all communications, which has a positive effect on the interior of the room;
• higher tolerances for overload and nominally permissible currents, taking into account the same wiring cross-section, since heat transfer occurs more efficiently;
• installation using this technology is considered more practical and safe, which is especially important if there are children in the family.
• fewer safety requirements according to the PUE - not necessary to apply in all cases

Changes in the release process[ | ]

The first version of the houses was built from 1966 to 1968

. The elevators in these buildings were located in a nook between floors (the garbage chute was in the same nook on the other side). There were openings in the middle of the stairs. They were built in 6-9 entrances.

In 1969-1970

slightly modified houses were built: the entrance windows became double-framed, the number of attic windows was reduced - there were 2 times fewer of them, the floor covering on the staircase landings changed (instead of linoleum, the floor began to be finished with fragments of facing tiles). They were also built with 6-9 entrances.

In 1970-1971

houses were built with an enlarged elevator superstructure on the roof. The elevator itself moved to the apartment floor, the garbage chute moved to the right nook, the left nook was eliminated, and the openings in the middle of the stairs were narrowed. They were also built with 6-9 entrances.

In 1971-1972

in the houses of the 602nd series, corner sections and arches appeared in the turning ones; in 1972, the cobblestone design was removed. Corner sections differ from ordinary turning sections in that the windows of the turning entrance are single-frame and are located close to the turn, the entrance has a reduced floor slab in front of the entrance and does not have a canopy, in the entrance itself on the floors on the elevator side, the entrances to the apartments were in a nook.

In 1972-1975

Experiments were carried out with facing tiles: their size became smaller, and the house at 25 Bela Kuna Street above the entrance to the entrance had narrowed canopies, changed the design of ventilation ducts and the layout of bathrooms. At this time, houses of this series were built in Naberezhnye Chelny.

In 1975-1982

the entrance windows have changed - now they are three small squares, the three-leaf windows of the apartments have changed, smaller (double-leaf) windows for kitchens and small rooms have appeared, a five-story modification has appeared (such houses were built in Utkina Zavod, Shushary and other suburbs of St. Petersburg).

Options for glazing the loggia in the house 1-LG 602 series

• Cold glazing.
  This option is suitable if you do not intend to use the loggia as a room and the main purpose of the glazing is protection from bad weather - wind, rain and snow.
• Warm glazing.
  Metal-plastic frames with double-glazed windows installed on the loggia will turn it into a warm living space. To do this, in addition to installing frames, you will need to insulate the floor, ceiling, walls and parapet and install heating - an electric heater or infrared heated floor. You can order all these turnkey works from our company.
• Semi-warm glazing.
  These are sliding warm metal-plastic frames filled with energy-saving double-glazed windows. In terms of thermal insulation, semi-warm glazing is only slightly inferior to conventional plastic windows.
• Frameless glazing.
  An elite glazing option that will allow you to unhinderedly admire the views and, if desired, on a summer day, move the glass, completely freeing up the opening.

What increases the cost of glazing in houses 1 - LG 602 series

• Warm metal-plastic glazing is 2300 ₽ or more more expensive than basic aluminum sliding glazing. The difference depends on the selected profile, double-glazed windows and fittings.
• For aluminum sliding glazing, the use of a three-rail profile increases the cost by 1,400 ₽. The three-slide profile is convenient for three-leaf structures; it allows all the doors to slide to one side, freeing up the opening as much as possible.
• Remote structures on the loggia will increase the cost by 9,000 rubles or more, depending on the complexity of the work.
• Interior decoration of the loggia, including finishing the railings and ceiling with plastic panels, as well as making a laminate or linoleum floor will cost 13,200 ₽ or more.
• Insulation of railings, floors, ceilings with penoplex will increase the cost by 2500 ₽ or more.
• Installing a built-in wardrobe will increase the cost by 19,000 ₽ or more.

Our recommendations for glazing in houses 1 – LG 602 series

The loggia in house 1 - LG 602 series is quite spacious. With a depth of 1 meter, it can be used as a cold room or as a warm heated residential room. Depending on the required temperature conditions, the loggia can be glazed with cold sliding aluminum frames or warm hinged metal-plastic frames.

• If the priority when glazing a loggia is low price, then aluminum sliding structures are suitable. Aluminum frames are inexpensive. This is a modern glazing method that provides good protection from adverse weather conditions.
• With cold aluminum and warm metal-plastic glazing, the structures can be divided into three or four sashes. Dividing it into three doors will allow you to get maximum sunlight on the loggia due to the wide light openings. Dividing it into four doors will ensure ease of washing and ventilation. The cost of glazing with four sashes is higher than with three.
• External glazing in house 1 - LG 602 series will allow you to install a wide window sill under the glazing and thus increase the internal volume of the loggia. Remote glazing is in demand among those who like to grow flowers on loggias.

Notes[ | ]

1. Yuri Maksimov.
   Houses in St. Petersburg - 1st generation of series 1-LG-602
   (unspecified)
   .
   Houses in St. Petersburg
   .
2. Riga, project 1Lg-602 (projects: 1Lg-602R, 1Lg-602V)

Features of loggia glazing in 1 – LG 602 series

• If there is no need for a warm loggia, then we recommend paying attention to lightweight aluminum glazing. Cold sliding aluminum structures are inexpensive, while reliably protecting them from rain, dust and wind.
• If warm glazing is required, then for this purpose you can use metal-plastic profiles 60 mm thick in combination with single-chamber double-glazed windows.
• If you are planning a room-type loggia that is as warm as possible, then for glazing you should use warm metal-plastic profiles with a thickness of at least 70 mm and double-glazed windows. In this case, it is necessary to provide for the installation of an electric radiator or infrared heated floor, as well as insulation of the railings, floor, ceiling and side walls.

Price for glazing a loggia in 1-LG 602 series

To accurately calculate the cost, invite our specialist to take measurements. Calling a measuring engineer within St. Petersburg is free.

Order the installation of a balcony block along with the glazing of the loggia.

Our recommendations

• The width of the loggia in the 602 series house will allow the glazing to be divided into either three or four sashes. If it is preferable for the loggia to have as much light as possible, choose the three-leaf option, especially since it is cheaper.
• Don't forget to order mosquito nets for opening doors. The cost of a mosquito net is from 700 rubles. taking into account its installation.
• We recommend installing a small window sill under the glazing of the loggia. The cost of a window sill 15 cm deep, including installation, is 1,250 rubles.