Adapter for a walk-behind tractor: types and operating rules - how to make an adapter for a walk-behind tractor with your own hands

Many farmers use walk-behind tractors to work in their fields. The adapter for the walk-behind tractor makes it possible to speed up its execution. This unit is used as a trailer that moves on wheels and is attached to a motor cultivator. You can add attachments to the device and mount a chair. Often gardeners make such a unit themselves.

Purpose of the adapter

The adapter for a walk-behind tractor in its classic form is a trailer with a seat on two wheels, attached to the walk-behind tractor, and to which attachments are mounted. It is the adapter that allows you to install additional equipment as easily as possible. The adapter turns the walk-behind tractor into a mini tractor and thereby makes it not only universal, but also as comfortable as possible.

The adapter allows you to sit while working, thereby making work easier. In addition, the adapter gives the walk-behind tractor greater stability, which also simplifies and facilitates work. It is also convenient that the immediately adjusted attachments will not go too deep or, on the contrary, rise too high. The attachments on the adapter are adjusted using a manual device. You can safely use the adapter even with light walk-behind tractors such as Neva and Cascade.

Maximum comfort can be achieved by using a steering adapter or a front adapter for a walk-behind tractor. In this case, the steering wheel allows you not to use the handles of a walk-behind tractor for control, which, of course, is much more convenient. Thanks to this device, you can get an ideal mini tractor - multifunctional, easy to operate and with an operating speed of about five kilometers per hour.

The dimensions of such an adapter for a walk-behind tractor are usually about two meters long, eighty centimeters wide and one and a half meters high. The adapter with the steering wheel is not small in size, since it is practically the front part of the mini tractor. This adapter is also suitable for the Neva walk-behind tractor - the lightest on the market today.

Considering all of the above, the adapter can be called necessary for a walk-behind tractor.

Advantages and disadvantages

After the walk-behind tractor has undergone modernization, the designers note the positive qualities of the front adapter:

• ease of operation;
• disclosure of traction resource - existing abilities increase;
• the possibilities of work are expanded - soil cultivation will speed up;
• if necessary, the unit is disassembled and assembled;
• good balance in weight and axles;
• You can move around on the device.

The disadvantages include the fact that in the presence of a movable coupling, stability deteriorates.

The adapter for the walk-behind tractor consists of the following structural elements:

1. The frame is built central or staircase. Suitable materials are metal pipes and corners. The design model must include a fork and bushing that will ensure free rotation of the trailer. There are converted vehicles in which the aggregate device and the trailer are combined. In this option, you should make a new stand for the transmission and engine.
2. Suspension systems can be axial, bridge, rotary, portal. It is constructed without the use of elastic fragments.
3. A steel sheet is used for the body.
4. The hitch is an important element of the converter; it makes the walk-behind tractor stable and securely connected. The coupling unit is made of a 15 cm pin.
5. The seat is the driver's workplace.
6. The steering is used with a rigid connection. You can build it with your own hands or purchase it in a special store. Craftsmen install steering rods and racks from a VAZ or Volga car.

We build a walk-behind tractor according to instructions from Arkhipov

Step-by-step device assembly technology

The assembly of the structure begins with the arrangement of the drive shaft. To do this, a housing with bearings is attached to it, a sprocket is welded and overrunning clutches are mounted, which will perform the function of a differential during operation. After this, the structure is equipped with wheels and a frame. A telescopic rod, a plow and a steering wheel .

The main elements of the running shaft: 1 – shaft, 2 – sprocket, 3 – cover, 4 – bearing housing, 5 – support platform, 6 – bearing No. 308, 7 – freewheel housing, 8 – pawl axis, 9 – pawl, 10 – ratchet, 11 – bearing No. 307, 12 – washers, 13 – wheel, 14 – pawl spring

The agricultural walk-behind tractor is equipped with special wheels, which, unlike rubber counterparts, are able to provide better traction with the ground.

Such metal wheels do not become clogged with soil. When they come into contact with the soil, they do not compact it, but rather loosen it.

To connect the frame of the unit with the engine mount and the frame of the scooter itself, two arc-shaped pipes are used. Between them there is space for placing a fuel tank.

To equip the engine, a bracket is used, ending with a steel axle 150 mm long. The bracket is welded cantilever to the U-shaped frame of the structure. The motor with suspension is suspended on the axle itself. The assembled structure is connected to the arc-shaped arcs of the frame. Only after this the secondary shaft is mounted, the control cables are pulled and the chains are tensioned.

READ Changing the Oil in the Gearbox of the Agat Motoblock

Main elements of the control unit: 1 – connecting axis, 2 – bar, 3 – pipe, 4 – handles

Connecting elements of the structure: 1 – main rod, 2 – control rod

What is good about this particular design?

There are dozens of analogues of this model, but in comparison with them, the original model of the walk-behind tractor has a number of undeniable advantages.

• Swivel joint. The processing tools and tractors of most of these models have a rigid connection, which complicates the maneuvering of the unit and thereby makes it difficult to work with it. The parts of this agricultural unit are connected by means of hinges. This makes it possible to change the direction of movement during work, if necessary, without removing the plow from the furrow.
• Shift of the axis to the direction of movement. Many owners, when cultivating soil using a walk-behind tractor, have encountered such a difficulty that in the process of moving forward under the influence of soil resistance, the unit moves to the side. To level the furrow, a lot of effort must be made. To compensate for such a skid, the master positioned the plow axis at a slight angle in the direction of movement. When plowing, the structure is slightly turned to the left. The desired position can always be adjusted using three rod joints.
• The level of the specified plowing depth. If in other models the plowing depth is maintained by lowering or raising the plow, then when working with this walk-behind tractor it is performed automatically. Regulation is carried out by changing the angle of the plow in relation to the furrow. The structure is equipped with a field board, which acts as a lifting force when burying the plow. If, on the contrary, the ploughshare appears above the surface of the earth, then its angle of attack instantly increases, under the influence of which it again plunges into the ground to a given depth.

General information about the tractor

The walk-behind tractor can be used separately, as well as connected to a wide variety of additional equipment, such as:

• cultivator;
• harrow;
• mower.

Such devices can significantly increase the possible range of work that a walk-behind tractor can handle. In addition to this, you can use a mini-tractor as a means of transportation if you prepare a special block adapter for it in advance.

This device makes it possible to sit quite comfortably on the seat with which it is equipped, and then perform exactly the same work, but with an incomparably greater degree of comfort. For example, in specialized stores you can purchase an additional unit with steering control for the Neva walk-behind tractor, or you can make it yourself. Fortunately, there are plenty of drawing materials on the Internet, which greatly simplifies the assembly process.

Features of the adapter for walk-behind tractor

An adapter is a special device for riding a walk-behind tractor. Using it, you can simultaneously drive a walk-behind tractor and cultivate the soil.

An adapter for a walk-behind tractor will help turn it into a mini-tractor

Working with a walk-behind tractor will be greatly simplified if you use an adapter. You will be able to change attachments, depending on what work you need to do - hilling, planting, weeding, transportation. With the help of this device, all processes will be doubled.

This unit allows you to sit comfortably on the seat with which it is equipped. Now you can do household chores, but with more comfort. Steering adapters are available on the market. However, you can make them yourself.

How to install?

Let's look at the principle of installing an adapter with a steering wheel using the example of a model for a KTZ walk-behind tractor with a steering column. Connecting the adapter to the walk-behind tractor begins with installing the trailer on the pin of the walk-behind tractor, which is located in its front part. The knot is secured with a cotter pin.

After this, you need to move the gas to its place under the seat, carrying it with the original cable. To do this, use a 10mm wrench and a screwdriver, remove the throttle control lever, remove the top plug under the seat, and lay the cable. If necessary, change the bolt, since depending on the adapter model, it may be larger than necessary.

See also: What is customs clearance

Next, tighten the bolts with a 10mm wrench. When moving the gas, make sure that the cable does not interfere anywhere. Remove the steering wheel from the walk-behind tractor and unhook the clutch and gearbox release cables.

Next, remove the steering wheel using a stand for ease of use. Having removed the steering wheel, remove the support and begin installing the pedals. At this stage of work, use a cable with an adapter plate, which is included with the adapter.

The plate is installed on the wing of the walk-behind tractor and secured with a bolt and nut. The lever screwed to the cable is placed in place of the roller bracket. After this, install the second cable, secure it and attach it to the installed bracket, fix it until the moment allows the cable to move.

Now you need to set the forward gear to the right pedal. There is no need to remove it for this. At the same time, adjust the components, checking the forward tension . After this, reverse is installed.

Composition of the adapter for the walk-behind tractor

Visually, the device is similar to a cart attached to a walk-behind tractor. Some people call such a device a “tractor car”. The mechanism includes:

• frame;
• sitting;
• wheels thanks to which he moves around the garden. The wheels can be rubber (with tread, allowing you to ride on compacted roads) or iron (used for working with large volumes of arable land). In most cases, the wheels are sold as a set, but if you want to change them, remember that there are options to choose from;
• cast iron or steel device for fastening with a working unit. This element is the most important component; it allows the vehicle to be stable.

Design and principle of operation

Essentially, the adapter is presented in the form of a trolley that is attached to the walk-behind tractor. After which the structure turns into a mini-tractor. The main details of such a unit:

• a frame to which other constituent elements are attached;
• driver's seat with lift lever;
• 2 wheels;
• clutch device;
• wheel axle.

In this video we will analyze the front adapter:

Frame

It is one of the most important elements of the device, since other elements are connected to it. Therefore, it must be made of high-quality and durable materials.

Driver's seat

One of the main advantages of the adapter is a comfortable seat for the operator.

Wheels

There are 2 types of wheels available - metal and rubber. The former are used for heavy types of work in the field. The latter are designed for driving on dirt roads.

Clutch device

The hitch is responsible for connecting the attachments and the mechanical unit itself. This fastening is defined as one of the most important, therefore it is made of high-strength metals - steel or cast iron.

The length of such a device is about 2 meters, width – 80 centimeters.

Depending on the clutch, the following design options can be considered:

• with movable clutch. This device is the lightest. The clutch here is located in the front, but control in this case is more difficult, since it is necessary to deploy the entire power unit;
• with steering. The clutch here is rigid, and control is achieved through a mechanical steering unit. This control is easier to use, but more difficult to produce.

There are different adapters for walk-behind tractors of different performance. For mechanisms with low power - with a short mount, for powerful ones - with a long one.

What it is?

An adapter for a walk-behind tractor is a trolley, the main elements of which are a seat, a brake, a brake handle, footrests, a coupling mechanism and a frame with structural parts attached to it.
The brake of the device is located near the foot rest. Typically, such a device is equipped with two wheels, and the seat often has a lifting lever. The design of the adapter can be either universal or special: some of these varieties provide for additional fastening of various canopies.

Equipping the walk-behind tractor with an adapter practically turns the working unit into a mini-tractor with a seat that increases operator comfort.

Application area

The adapter turns the walk-behind tractor into a universal, multifunctional mechanism. When using this equipment, the operator can be in a sitting position. It is important to note that it gives the walk-behind tractor stability and generally simplifies the process of doing the work.

An initially fixed attachment will not move up or down when moving.

The steering mechanism has great advantages. You no longer need to use the walk-behind tractor handles. Now there is a special steering unit that allows you to reach speeds of up to 5 km/h.

When used together with attachments, you can expand the range of work performed:

• cleaning leaves, snow, territory;
• soil hilling;
• land leveling;
• transportation of goods of different sizes.

Advantages and disadvantages

Adaptive steering of a walk-behind tractor is convenient because:

• eliminates the need to walk behind motor vehicles;
• the traction potential of the walk-behind tractor is fully realized;
• the functionality of agricultural equipment increases;
• transportation of the unit to a specific processing area is simplified;
• easier control - no longer requires a lot of operator effort;
• the structure can be disassembled if necessary;
• sufficient balance is achieved on all axes.

The disadvantages include an increase in fuel consumption, which after modification takes one and a half times more. However, these losses are justified by the ease of management and saving a colossal amount of time that the gardener spends when working with the land.

Steering devices

Such devices make it possible to rebuild the walk-behind tractor into a full-fledged mini-tractor; the only difference, as already mentioned, is the preservation of the power of the engine used in the unit. It is attached to the walk-behind tractor using a hitch, which is placed in front of the adapter. This block is perfect for motor engines such as Sadko, Don, Plowman, Forza, Huter, Champion, Profi.

In particular, such an adapter includes: steering; pair of wheels; clutch; brake and gas pedal; driver's seat; frame structure.

Behind such an adapter there is a special lifting mechanism, to which it is possible to connect additional trailed and mounted equipment.

As for the steering adapter specifically for the Neva walk-behind tractor, the cost of which, as a rule, is approximately 45 thousand rubles, it has the following technical characteristics:

• wheel track - 60 cm;
• total weight - 105 kg;
• ground clearance - 35 cm;
• speed indicators are about 15 km/h.

Front adapter

Structurally, it is similar to the previous type of adapter, but its coupling mechanism is located at the rear. This means that we get a full-fledged front adapter for the Neva brand walk-behind tractor. The presented design is completely disassembled, which greatly simplifies its subsequent transportation. Naturally, the cost of any additions to the unit is determined separately.

Front adapter specifications:

• length - 190 cm;
• width - 81 cm;
• height - 140 cm;
• ground clearance - 30 cm;
• wheel track - 75 cm;
• speed indicators - approx. 10 km/h;
• total weight - 65 kg.

The cost of such a device is approximately 27 thousand rubles.

Diagram and device of the adapter to the walk-behind tractor

The adapter for the walk-behind tractor is a trailer with a seat based on a two-wheel frame. Its purpose is to make it easier to work with a walk-behind tractor, which it transforms into a device for transporting goods, similar to a mini-tractor.

The adapter provides a significant reduction in the labor intensity of agricultural work and increases the operating efficiency of the walk-behind tractor many times over. It is worth noting that there are two types of heavy adapters: long and short. They can be connected to different walk-behind tractors. A lightweight adapter for a cutter, which is attached to one wheel of a walk-behind tractor, is also known, in contrast to a heavy adapter.

Adapters, being the main link in connecting the walk-behind tractor and attachments, are equipped with a seat, an extended or short bed (drawbar) and hitches. Structurally, the adapter contains two couplings. One of them ensures the connection of the adapter with the walk-behind tractor, and the task of the second is to aggregate attachments: harrows, plows, cultivators, diggers, mowers, etc. The attachments are usually connected to the adapter using a single hitch. The attachments are brought into the working position by means of a manual drive.

Today, many different types of adapters are produced, which, based on the main features of their design, can be classified into two main types: body (universal) adapters are suitable for both agricultural work and cargo transportation; bodyless - only for processing.

Adapters with long or short drawbars are connected to walk-behind tractors of various capacities. Adapters with short drawbars are used only on light walk-behind tractors, and adapters with long drawbars are used on heavy ones. As a rule, adapter models are equipped with devices for adjusting the track width, sliding drawbars, as well as drives for lowering and raising attachments.

Varieties

Adapters with steering can be classified according to the type of wheel arrangement. The steering gear is performed in the format of a separate unit. The steering wheels can be located at the front or rear.

As for the position of the steering gear, this depends on the design features and spare parts, because during operation it is impossible to avoid repairs and replacement of worn parts.

Models in which the adapter is located at the front are called front-steering varieties. In such modifications, the engine is a kind of tractor for the entire unit.

If the adapter is located at the rear, and the walk-behind tractor has to pull it behind it, such a device is called rear-wheel drive. In other words, if the adapter is located in front of the walk-behind tractor, it is a front-type product, and if at the back, it is a rear-type product.

The choice of one or another option is made by the buyer himself, based on his own preferences.

For example, the front version is more suitable for loosening and plowing the cultivated soil. Here, in addition to the power of motor vehicles, there is no need for an overview of the site. If you need to hill up the crop being grown, then the rear analogue is better suited for such purposes.

However, you can take a closer look at the option where the adapter is located closer to the drive axis. In this case, the operator’s weight will create additional load, preventing the walk-behind tractor from jumping out of the ground while the equipment is operating.

Based on the variety, adapters can be classified into body and bodyless. The former involve the transportation of goods, the latter are more suitable for cultivating the soil. Depending on the power of the unit, the adapters are connected to the walk-behind tractor using a long or short drawbar. The first modifications are used on heavy equipment, the second are used on light equipment.

DIY adapter for walk-behind tractor drawing

Converting a walk-behind tractor into a mini-tractor can be done by purchasing and attaching to the unit an adapter, which is a trailed trolley equipped with a seat. A front adapter for a walk-behind tractor will make it easier to carry out agricultural work and reduce fuel costs. However, if you wish, you can make a drawing of an adapter for a walk-behind tractor to make this mechanical device with your own hands, with which it will be easy to carry out all agricultural work on the land.

Please note that the adapter must include the frame, wheelset, seat and coupling devices. If you make an adapter for a walk-behind tractor with a reliable design yourself, then you can immediately sit in its seat and begin gardening work on your plot of land, being completely confident that everything will go well.

In addition to the walk-behind tractor itself, when making an adapter for it you will need:

1. two wheels;
2. angle, sheet and steel pipes;
3. welding machine;
4. soft seat;
5. tools for gardening;
6. set of tools.

The process of transforming a walk-behind tractor into a mini-tractor includes the following steps:

1. Determination of the kinematic diagram of a mini-tractor. You can either make a kinematic diagram yourself, with the main attention paid to ensuring the balance of the structure so that no additional loads arise, or you can take a ready-made diagram (see drawing below), which kinematically depicts a mini-tractor made from a Neva walk-behind tractor.

The engine of the power unit (2), driving the front wheels (1), transmits torque through the chain (3) to the reverse gearbox (4), and from it, through the cardan transmission (5) to the rear axle (6), driving rotation of the rear drive wheels (7).

• 2. Manufacturing the adapter frame for the walk-behind tractor. When manufacturing the frame, it is necessary to provide for the presence of a fork with a bushing to ensure the rotation of the trailer.
• 3. Manufacturing of the adapter body for the walk-behind tractor. The blank for the body will be a steel sheet. The height of the sides of the body should be at least 30 cm.
• 4. Installation of the seat. The seat is bolted to the spinal beam of the adapter frame at a distance of 80-85 cm from its front end.
• 5. Installation of additional attachments (tools).
• 6. Checking the performance of the finished mini-tractor.
• 7. Painting a mini-tractor.

If necessary, you can purchase and additionally install on the adapter such agricultural implements as: plow; potato digger; hillers; harrow; snow scraper, etc.

By creating a mini-tractor with your own hands, equipped with additional attachments, you can significantly increase the productivity of gardening work and plow, hill up or clean your garden plot all year round, with virtually no special effort.

Arrangement of a multifunctional model

To manufacture a multifunctional device, you need to prepare:

• Steel pipes and angles;
• Sheet steel;
• Two wheels;
• Comfortable seating;
• Welding machine and set of tools.

This adapter is a multifunctional model. It can be used for basic agricultural work and transporting goods over uneven terrain over short distances. The structure can be equipped with agricultural implements such as a plow, harrow, hiller, and potato digger. During the winter months, you can attach a snow scraper to the adapter for clearing snow.

The main elements of the equipment are: frame and coupling devices, as well as wheelset and seats

The process of producing an adapter at home takes place in several stages.

Stage #1 – drawing up a kinematic diagram

To ensure the balance of the structure and prevent additional overloads at the design stage, it is necessary to draw up a kinematic diagram. You can make it yourself or use a ready-made version.

This circuit is designed for the manufacture of an adapter designed to work on the Neva walk-behind tractor.

Commissioning

Before immediately performing any agricultural work using a self-improved walk-behind tractor, you need to perform several final checks:

• make sure the seat is securely installed;
• check the quality of all welds and reliable fastening of bolts and screws;
• start the walk-behind tractor and make sure that the engine is running normally and smoothly;
• install, if necessary, mounted gardening tools and try them in action;
• Be sure to check the operation of the brakes and make sure they are in good condition.

If, after performing all these simple works, no problems were found in the operation of the walk-behind tractor, it is necessary to bring it into proper appearance. To do this, a self-created adapter is primed and painted in any color desired. This stage not only gives the walk-behind tractor a beautiful appearance, but also protects the metal from corrosion.

Creating an adapter with your own hands is a responsible task that requires time, experience and extreme care. Therefore, only those craftsmen who already have similar experience should undertake this work. In other cases, it is better to either purchase a ready-made adapter or seek help from a specialist.

To learn how to make an adapter for a walk-behind tractor with your own hands, see the following video.

Most people have garden plots or summer cottages. Cultivating land is a very difficult task. You have to spend a lot of time and effort to dig up and loosen the soil. Therefore, many people purchase walk-behind tractors for easy cultivation of the land. They can also be used for other purposes. But these devices have one small drawback - when moving, you have to walk behind them. Walking for a long time, of course, quickly tires. There are special devices, the installation of which speeds up the work process. These are adapters for walk-behind tractors.

The adapter is a trolley that moves on wheels and is attached to a walk-behind tractor. Expansion of functionality is ensured by installing a mechanism for using additional equipment. The chair is installed on the adapter. Then the question arises - how to make an adapter for a walk-behind tractor with your own hands. The solution to this issue is feasible in everyday life.

Maintenance and storage

As a rule, you need to check the oil level every time you turn it on, and replace it at least once every six months. The air filters are checked before turning on the unit. Clean it when it gets dirty or once every three months.

The sump tank is cleaned every six months. If it is necessary to replace consumables, they try to buy original parts or those with similar quality characteristics.

They will help extend the life of agricultural equipment and will not cause engine failure. As for cleaning the air filter, this is necessary to maintain the working condition of the carburetor.

Do not use a solvent with a low flash point for this, as this is flammable and can lead not only to a fire, but also to an explosion. You cannot use equipment without an air filter, because this causes accelerated engine wear.

Repairs are carried out in a well-ventilated area with the engine turned off. In this case, it is necessary to ensure a sufficient level of ventilation in the work area. Exhaust gases are hazardous to human health and inhalation can be fatal. Motor vehicles should be stored in a dry, ventilated area.

During the summer season, it is not recommended to leave it outside, especially if the base of the operator’s seat is made not of plastic, but of wood. In order to extend the quality and performance characteristics, when storing the unit outdoors, you need to cover it with a tarpaulin cover.

If you do not plan to use agricultural machinery for more than three months, gasoline is poured out of the fuel tank, it is cleaned, and the position of the gas lever is checked. If necessary, disconnect the wheels.

Recommendations for use

Regardless of the type of assembled and connected product, you need to start working with it by taking into account safety regulations. Before starting the engine, you need to conduct a visual inspection of the equipment to eliminate visible damage and malfunctions. Do not add fuel to the fuel tank while the engine is running.

If you hear an unusual noise when you turn it on, you need to stop the engine and identify the cause of the problem.

Do not use gasoline of inappropriate brands or fuel mixed with oil and other impurities. Before each start, you need to check the oil level, since this is often the reason the engine stops.

In order to extend the service life of motorcycles, a new product must be run-in. It will contribute to the trouble-free functioning of the walk-behind tractor.

During this process, the working surfaces of the parts are usually worked out. The duration of running-in, as a rule, varies for products of different brands and modifications. In some varieties it can be up to 20 hours or more. At this time, you should not load the equipment to the maximum extent.

See also: Strapping machines: review article

One recommendation is to change the oil after the first five hours of operation. As for warming up the engine, this should be done at medium speeds without load for about three minutes.

Based on the modification of the walk-behind tractor, for the first hours of its operation it is necessary to operate the unit in first gear (with the gas lever in the middle position). It is important to try to avoid not only maximum, but also minimum speed . At the end of using the equipment, you need to check the tightness of the threaded connections.

As for the cultivated soil, it is better to cultivate simple soil in the first hours. In addition, you need to take into account that rolling in is not done on rocky and clay soil.

Before work, you need to inspect the area and remove stones and large debris. In general, when working with motorized equipment, you need to constantly monitor its cleanliness and check the fastening strength of the accessible elements of the adapter and walk-behind tractor, including attachments.

Don't forget to tighten any loose fasteners. You also need to remember about timely maintenance.

Rating of the best models for 2021

If you are not sure that you understand how to make an adapter yourself, then it is better to turn to ready-made options. Today the market offers the widest range of products from the best manufacturers. Asking which adapter from which company is better is pointless, since each manufacturer offers a product designed for specific models (although they may also offer universal devices).

There are a large number of varieties of such devices: different load capacity, different power, with a body, without a body, long, short, etc. Different models have different functionality and direction of operation, as well as different diameters of the joint mechanism (unless it is a universal coupling mechanism). The most popular ones are usually suitable for both land cultivation and transportation. They have a body and are more expensive, while the bodyless versions are only suitable for cultivation and are not as expensive.

This review presents only the best and highest quality (according to buyers and popularity) models available in 2021, as well as our recommendations on how to choose a decent unit at the right price.

AM-2 rear with steering wheel

AM-2 has almost the same general characteristics as the already mentioned Tselina, although it has a higher cost. Equipped with wheels 4.00 x 8, 4.00 x 10, 5.00 x 10, 5.00 x 12. Used with any walk-behind tractor over 4 kW (for MTZ, Motor Sich, Grasshopper and others). It has a steering control, 3 pedals for installing the clutch and engaging reverse. The gas throttle is installed, and there is the possibility of installing active attachments.

Working with it is simple and there are no additional costs for equipment. It is equipped with a lever for raising/lowering the hitch, which greatly facilitates work in the field and allows you to move freely throughout the entire agricultural area.

Length120 cm

AM-2 rear with steering wheelAdvantages:

• equipped with a lever for raising/lowering the attachment.

Flaws:

• Drilling holes in the steering mechanism is not accurate along the axes.

AMPK-1 for UGRA walk-behind tractors

The all-wheel drive AMPK-1 with steering control is a development of the Kaluga machine-building plant (Kaluga engine), designed exclusively for UGRA walk-behind tractors. An important point should be noted about the latter: UGRA MBs are equipped with two power take-off shafts at once - upper and lower, while in most cases there is only one driving PTO. The upper shaft is used to attach the linkage, while the lower one is intended specifically for aggregation with AMPK-1 - it is this shaft that transmits torque.

The device is sold at a fairly high price, but at the same time it has all the characteristics of top-end devices: good maneuverability on almost any soil; possibility of use not only for cultivating land, but also for off-road transportation; general convenience and high quality of materials and workmanship; The seat is conveniently located - the operator does not experience discomfort in a sitting position.

AMPK-1 design: frame, operator's seat, drive cardan, gearbox, floating clutch mechanism, brakes, wheelset. If we talk about wheels, the Kaluga machine-building enterprise provides two options for this model: 4.00 x 10 and 19 x 7.00 * 8.

To summarize, the combination of UGRA and AMPK-1 with the function of off-road driving allows the owner to climb into almost any hard-to-reach places without any problems, due to which it is often compared to a mini-tractor for its intended purpose (which makes sense, since UGRA has approximately the same functionality, but at the same time has cheaper attachments). Thanks to good traction and all-wheel drive, the machine moves freely over uneven terrain. On a plot of land, the device performs a little worse: active devices cannot be connected, so if you want to connect a mower, snow blower or potato digger, then for comfortable work you will first need to disconnect the adapter and work the old fashioned way - on foot, dragging the walk-behind tractor behind you. But any passive instruments are connected without any problems. So, whether to take it or not depends on your personal selection criteria.

Length148 cm

AMPK-1 for UGRAD walk-behind tractorsAdvantages:

• good driving characteristics.

Flaws:

• high price;
• inability to connect active equipment.

"TANDEM" PM-06 "Virgin soil"

For the TANDEM PM-06 Tselina, the body is located in the front, while the coupling device is located in the rear. It is designed for use for arable purposes and off-road travel. The machine is controlled by steering.

The module attaches to MB series devices: OKA, AVANTGARDE, Neva, Tselina, AGAT. Its main advantage is that it is front-wheel drive, that is, with drive to the rear axle, the axle of the walk-behind tractor. Thanks to this property, moving off-road, especially after rain or through country mud, feels much better.

It also has its shortcomings. The most noticeable of them is that the connection between the MB and the adapter is made only through the drawbar, that is, the place on which all active tools, such as mowers, snow blowers, brooms, etc., are hung. This means that the PM-06 and the specified equipment cannot be used at the same time will work (although the Tselina PM-05 model had such an opportunity).

Thus, we actually have a mini-tractor, to which passive tools are attached for hilling, weeding, loosening the earth, and so on. If you use it specifically for such purposes, then there is not the slightest complaint about the quality. If we consider it exclusively as an off-road vehicle, then it can also be rated very highly - high maneuverability, excellent maneuverability. However, the price of this unit is quite high, which is determined by its high load capacity (300 kilograms).

Length175 cm

"TANDEM" PM-06 "Virgin Land"Advantages:

• front-wheel drive;
• Great off-road ride.

Flaws:

• inability to use active equipment.