Metal shears: advantages of manual and electric shears for cutting sheet metal or scrap metal, 85 photos

There is no way to do construction without specialized tools. And it doesn’t matter whether it’s construction or dismantling, you can’t do it without special tools. One of these necessary tools is hydraulic shears, since any structure contains metal elements. There are a large number of varieties of such instruments. And each has its own specifics. However, they are all designed for cutting metal elements. Each type of scissors is sharpened for a specific cutting. There is one for cutting reinforcement, and there is one for cutting sheet metal. There are also devices for cutting various cables. In general, there are a large number of devices that are tailored to perform a specific job. And therefore, if the question arises about purchasing hydraulic shears, then you should think carefully about everything and select the necessary copy. Because you can unknowingly buy models that cannot solve the tasks you have set. Therefore, you should determine what exactly your hydraulic shears will cut. You should also choose what tool you need, manual or professional. Let's take a closer look at the rating of the best hydraulic shears for 2020.

Peculiarities

If there are concrete structures at the construction site, then hydraulic shears are great. They perform very well when cutting reinforcement. In construction, manual ones are excellent because they are lightweight and small in size and can easily cut reinforcement. During construction, they are one of the most necessary tools. They will help you cut both reinforcement and many other metals. They are in demand not only in the construction industry, but also in manufacturing.

They are used as large units that have a large hydraulic system; it itself supplies the material being processed. Hydraulic hand tools are also available. They are mainly designed for cutting small fittings, cables and other small metals. The cutting itself is carried out thanks to an internal pump, which creates the necessary pressure. Thanks to this pressure and the installed blades, metals are cut.

Hand-held instruments are in great demand due to their portability. They can be easily transported independently and carried without much difficulty. In production they use manual ones, which have a separate pump. They are designed for cutting various metals that have large dimensions. It is also possible to connect various blowers to these scissors.

Principle of operation

In operation, all hydraulic shears are similar and very simple. The only difference from conventional scissors is the method of applying force. In hydraulic ones, the force on the cutting part is supplied by a hydraulic cylinder. They work great and without any extra effort. This type has many advantages.

1. Thanks to the hydraulic cylinder, there is a lot of pressure on the cutting part, which can reach several tons. However, the scissors themselves weigh only a few kilograms.
2. High device mobility.
3. Good cut quality.
4. Hydraulic shears are safer due to their drive.
5. Their knives are the best option for cutting metals.
6. The cutting process is slow. Therefore, it can be easily controlled.

In addition to these advantages, there are others. These also include fast and accurate work when cutting iron. This advantage is especially important for detailed cutting. Manual hydraulic shears are very easy to work with and do not require special skills. It is enough to read the complete operating instructions only once, and this is enough for excellent and correct operation.

Varieties

There are mainly two types:

Knife machines have two special knives that easily cope with cutting the edges of metal. And to cut through the metal in the middle, they use nibblers.

There are currently three types of hydraulic shears:

1. Manual. This type is used for cutting cables and fittings. This type is widely used in various types of work. They are mainly used in cutting various wires. Capable of cutting in fairly large volumes. Manual hydraulic shears differ from ordinary ones in their cutting blades. Professionals are also divided into two types. The first guillotine. It is quite popular and in demand. The second one is edge. The first type can easily cope with cutting bundles of wire or cables. The second type is designed to work with various sheet iron.
2. Stationary. Such scissors are connected to a separate pumping station. They can cut various metals of any thickness. Stationary ones are widely used in mechanical engineering. These scissors have the largest sizes of all types.
3. Sorting hydraulic shears. They are widely used in metallurgical complexes. Sorting machines differ according to the method of supplying pressure.

Recommendations for selection

The first thing to consider when choosing hydraulic shears is the thickness of the material they will be working with. The working part of the product should be selected based on the scope of use. Also, when choosing a tool, you should pay attention to its dimensions and weight.

The main parameters should also be taken into account. They are the ones who can play a big role in the future. The first thing you should pay attention to is the cutting force. This parameter is calculated in tons. You should also know the required gap between the blades. The release force should also be taken into account. It is measured in kN. The traction force and the rod movement parameter should also be taken into account. All these are necessary parameters that are important to consider when choosing.

There are special combined scissors, which, in turn, are designed for opening various metal structures. They are often equipped with a special pedal, which is needed to relieve pressure. Therefore, when using them, you should always check the functionality of this pedal in detail before starting work.

Conventional hydraulic shears easily cope with profile cutting and are suitable absolutely everywhere where metal work is carried out. Firefighters also have such a tool. They can easily cut both reinforcement, wire and cable. Each type of installed knives has its own type of cut. All cuts are neat, despite the thickness of the product.

Safety precautions

The metal being processed has a thin edge that can easily cause injury. In addition, notching and slotting shears produce sharp shavings during operation, which can get into your eyes.

Therefore, in order to avoid injuries and injuries, when working with electric scissors, you should follow safety precautions:

• Before turning on, check the reliability of fastening of the cutters, inspect the working unit and power cable for cracks.
• Manipulate with protective gloves and goggles.

• During operation, do not touch the gearbox to avoid getting burned.
• It is forbidden to touch a cut of metal with bare hands, especially if it is formed with sheet-type scissors - in this case, the edges of the metal are flattened and become razor-sharp.

Safety precautions are an important aspect when working with electric scissors; do not neglect them under any circumstances!

Rating of the best hydraulic metal shears

Designed for cutting wires, steel cables, rods, cables. This is a good mobile option. They can be easily transported anywhere thanks to their low weight of 5.5 kg. The blades are made of chrome-molybdenum steel. The main parameter of any hydraulic shears is the cutting force. Here it is 7 tons. This indicator is quite sufficient for cutting cables, ropes and other materials.

Cost: from 18,000 rub.

• Blade material: chrome-molybdenum steel;
• There is a case for storage and transportation;
• Blades of increased hardness HRC 58…62.

• Not identified.

Designed for cutting reinforcement and rods. They are small in size and weigh very little. These are very good indicators for convenient work. SHTOK AR-12 01008 have special knives that fix the cutting metal. Scissors have gained great popularity both in workshops and at service stations. They are very convenient and easy to use.

Rating of the best hydraulic shears for cutting cables

This device has good durability and reliability. With their help you can easily cut a cable that has tape armor. They can also easily cope with a telephone cable with a diameter of 65 mm. These scissors are designed to work in confined spaces. The cutting force is 4 tons.

Cost: from 24114 rub.

• Easily copes with tape armor;
• There is a case for storage and transportation;
• Blade material: chrome-molybdenum steel;
• Convenient carrying handle.

• Great cost.

An excellent tool designed for cutting various multi-core cables. These scissors are capable of producing a force of 6 tons. This is quite enough to cope with any multi-core cables. The scissors themselves are of excellent quality and can last quite a long time with the right care.

Cost: from 15,500 rub.

• Easily handles all types of cables;
• There is a storage case;
• Blade material: chrome-molybdenum steel;
• Easy to use.

• Not identified.

Excellent high quality hydraulic tool. Capable of cutting any cables with ease. They are light in weight and size. This makes them more comfortable for long periods of work. The cutting force is seven tons.

Cost: from 48,671 rub.

• Has blades of increased hardness;
• There is a storage case;
• Blade material: chrome-molybdenum steel;
• Has a rotating head.

• Price.

Power consumption

The performance of scissors (speed of operations) directly depends on this indicator. The higher the power, the better the device will cope with large volumes of work and thick parts. At the same time, the price of the scissors, the turning radius, energy consumption and network load increase. of most tools is 300-1200 W.

Important: you should distinguish between rated power consumption and output power, which describes the actual capabilities of the scissors. The output power is always less than the rated power.

Rating of the best hydraulic shears for tires

Ideal for rubber grinding plants. They are capable of working both manually and automatically. Capable of both cutting and grinding rubber. They have a compact design and do not require special bases for installation.

Cost: from 570,000 rub.

• They work in two modes;
• They have replaceable knives with four cutting edges;
• The design is made of wear-resistant steel.

• Not found.

They have a strong construction and are capable of cutting tires from both cars and trucks. The cutting blades are made of high quality steel. These scissors are suitable for many organizations involved in tire recycling. The power of this unit is 22 kW.

• Capable of cutting large tires;
• Durable design;
• Blades made of high-strength steel.

• Large design;
• Price.

Capable of easily recycling tires from both passenger cars and light trucks. They have excellent performance. Ideal for tire collection points and tire shops. An excellent option at a low cost that can satisfy a large number of needs.

• Able to work for a long time;
• Durable design;
• Excellent performance.

• The weakest in their line.

Devices

specializes in the manufacture of electric scissors specifically for professionals. Their rated power averages 13 kW. They are capable of operating from a mains voltage of 220 V at a maximum frequency of 34 Hz. Many models are ideal for steel sheets. Additionally, specialists choose them for cutting copper. In this case, the sheet thickness can be a maximum of 2.1 mm.

Stators in many models are installed with a protective sleeve. Also worth noting are the interesting shapes of the punches. If we consider cutting electric shears, then hexagonal shafts are used. In this regard, their productivity is quite high. However, the spindle can make no more than 2 thousand revolutions per minute. High-quality electric scissors of the presented brand will cost around 17 thousand rubles.

Rating of the best hydraulic shears for excavators

An excellent option for an excavator. They are of excellent quality from a popular company. Jaws are also sold with them. Available for both concrete and metal. They cope with all tasks with ease. The best option used by a large number of organizations.

Cost: from 210,000 rub.

• Excellent quality;
• Able to work with both concrete and metal;
• There are replaceable jaws.

• Not found.

Another excellent hydraulic tool from the same company, but for heavier excavators, is the Delta MF-60. With great functionality and capabilities. They have long established themselves in the market and are in great demand.

Cost: from 2871000 rub.

• High quality tool;
• Able to work with concrete and metal;
• There are replaceable jaws.

• Not found.

Excellent good quality scissors. They complete all assigned tasks without any complaints. Also a great option for long term use.

Cost: from 1,000,000 rub.

• High quality;
• Excellent for breaking and cutting;
• Adapter plates are included.

• Not found.

Equipment

Locking the power button prevents accidental starting of the electric scissors. Makes the tool safer to use.

Stroke frequency adjustment – ​​makes it possible to customize the scissors for a specific task and working conditions.

Adjusting the gap between the knives - allows you to adapt the sheet tool to the thickness of the metal workpiece. For high-quality cutting, these parameters must correspond to each other.

Hand protection – represented by a shield plate that ensures the safety of the operator.

For added convenience, some electric scissors are equipped with a built-in thickness gauge, a hanging hook, a flashlight, and an oil-resistant power cable.

User manual

Before you start working with hydraulic shears, you must follow a number of recommendations.

1. All tools are sold with instructions. Therefore, before starting work, you should read it carefully.
2. If the scissors are new, you should remove the protective grease on the blades before starting work.
3. Also, before work, you should check the oil level in the hydraulic system. If it is not enough, it is necessary to top it up based on the technical documentation. You should also know what oil needs to be added to the system.

Care must be taken when lubricating hydraulic tools. Everything must be done strictly according to the instructions. Otherwise, due to improper lubrication, the scissors may become unusable.

With proper care and maintenance, any hydraulic equipment can last a very long time without serious breakdowns. If you follow all operating rules, then failure is unlikely. Any equipment must be handled correctly in order for it to work as long as possible.

Additionally

The diameter of the fitting and the diameter of the hose are taken into account when choosing pneumatic shears. These parameters are important for connecting the tool to the compressor.

Important: When connecting pneumatic shears to the compressor, pay attention to air flow and pressure. These characteristics ensure compatibility of the two devices and affect the parameters of the scissors. For example, the higher the air flow, the thicker the cut.

Length of the network cable - the longer the cord, the further the electric scissors can be from the outlet and the higher their range of action. In different instruments, the wire length is 2-4 m.

Noise level, vibration level - the lower these indicators, the more comfortable it is to work with scissors. The noise level is measured in decibels (dB), the vibration level is measured in meters per second squared (m/s2).

The best scissors in 2019-2020

If you are interested in information about what the best scissors are in 2019-2020, then first it’s worth noting that this tool is used in different areas. You need to understand for what purpose you are going to use it. For example, it could be stationery or tailor's scissors - for paper or fabric, respectively.

By being aware of the design features, as well as understanding which of the models have already proven themselves well in practice, you will be able to make the right choice. We took this fact into account, and therefore decided to collect the best scissors in the TOPs, dividing them into categories.

TOP: best scissors for haircuts

Kapous SК10T/6.0

The scissors are equipped with offset type rings. They allow you to work for a long time, while the masters note that there is no discomfort at all. The blade on the bottom is equipped with 35 teeth, but the length is 6 inches.

In terms of price, this is an acceptable option; you can buy them for around 1,500 rubles. It is also convenient that the manufacturer equipped the model with an amplifier for the little finger.

Advantages

• reasonable price;
• the coating has a polished base;
• the ride is soft;
• The scissors will last a long time.

Flaws

Dewal Profi Step 102/5.5

The scissors are convenient. Made of steel with strength characteristics. The tool is made in accordance with an ergonomic shape; the model is provided with convection sharpening, which is made at an angle of 40 degrees. It will not deform under mechanical stress. The length of the canvas is 5.5 inches.

The cost of scissors is around 1300 rubles.

Advantages

• the emphasis is removed;
• reasonable price;
• The package includes a cover;
• smooth ride.

TOP: the best scissors for sewing

Schmetz 20 cm 82020

Opens the TOP model of scissors for cutting. Equipped with a curved shape, which is convenient in practice. There is a small ring that points upward. The design is angular. It makes it possible to cut on a straight surface. Due to this, the tailor does not need to lift the material to a height. The blades move under the fabric area when the scissor part is much higher.

The length of the scissors is 20 centimeters. This is quite enough to store them in the work area. The screw can be tightened or loosened. You can adjust this yourself using a screwdriver.

The construction is made with high quality. The material chosen is stainless steel, it is distinguished by high quality indicators. The bottom ring can fit 3 tailor's fingers. Due to this, the manufacturer was able to provide a stronger cut.

Users share information in their reviews that, due to the sharp-pointed blade, it is possible to penetrate under the layer of fabric. The pads are thick, and therefore they are convenient and comfortable to use. As for the price, you can buy the best scissors for around 1 thousand rubles.

Advantages

• pleasant performance indicators;
• ease of use;
• They will cut even thick fabric;
• the size is convenient for storage and work;
• build quality and material.

Flaws

• The manufacturer does not include a case in which you can store the scissors.

Kretzer Finny 72024

When studying which scissors are best to purchase for cutting any types of fabrics, leather, fur, pay attention to this model from Kretzer. It is produced by a German brand. The quality is top notch. The scissors are made of steel, the blades are sharp, they cut perfectly. There will be no thread crumbs on the cut.

The handles are made of plastic. They are not able to weigh down the instrument, and are also very convenient in practice. Your hand will not get tired, even if you work for several hours in a row. Inserts with a rubberized base prevent your hand from slipping when working. Buyers of the model are satisfied and recommend it for purchase. The owners note that the blades retain their properties even after 6 years of use.

Overall, this is a very good offer from the German brand. The cost of scissors varies on the domestic market around 2 thousand rubles.

Advantages

• cut different types of fabric;
• convenient in practice;
• quality material;
• will last a long time;
• During operation, the hand does not slide on the surface of the scissors.

Flaws

• high price, not every tailor can buy them.

Gamma G-301

The rating was supplemented by a model from a domestic brand. In fact, our manufacturers produce worthy products that truly deserve praise and attention. These scissors can be used both at work in the studio and at home. Their length is around 25 cm. The design is made of steel with strong characteristics, and therefore they are quite noticeable during operation.

Your fingers will not slip, and calluses will not appear on your skin during prolonged use, and all because the inside of the ring is well rubberized. Scissors are great for cutting jeans, coats, suit fabrics and dress fabrics. This model fits well in cutting and will allow you to make small cuts.

These scissors open perfectly in any corner and will not wobble during operation. They fully comply with GOST standards, which allows customers to say that they are satisfied with their choice. Indeed, such scissors will last a long time and will delight you with ease of use.

Buyers are also pleased that the price of scissors is around 300 rubles, which is an acceptable offer today.

Advantages

• optimal balance of price and quality of materials;
• used for various types of fabrics;
• will last a long time;
• self-sharpening;
• ease of use;
• handles are made of heat-resistant plastic;
• The stainless steel blade is of high quality, it is diluted with chrome.

Flaws

• cannot be dropped;
• Only fabrics can be cut.

conclusions

Electric scissors can save their owner a lot of effort and time.

Sheet shears are the simplest and most reliable, but limited in functionality.

Nibbler and spline tools are best suited for making radial cuts and working with profile workpieces.

For periodic use at home, a cheap tool like TITAN PPN55-16 will be sufficient.

For professional work with thick metal, the Fein BLK 5.0 nibblers are best suited

TOP: the best scissors for manicure

SILVER STAR HCC 1

This model of nail scissors is ideal if you need to cut off side hangnails or nails. They are equipped with a reinforced structural frame and a direct-use blade. They are produced in the Russian Federation, the price is quite reasonable - 340 rubles, and therefore these scissors have quite a few fans. Just keep in mind that the blades are sharpened by hand, and their length is 22 mm.

Advantages

• reasonable price;
• compact dimensions – 105 mm;
• the blade is long;
• additional coating with shine;
• made of stainless steel.

Flaws

• The package does not include a manufacturer's case for storing scissors;
• The straight shape of the blades prevents you from simply cutting the cuticle at the top.

ZINGER 1303 PREMIUM

The solution is great. Suitable for cutting cuticles or hangnails. The blades are sharpened manually and professionally. The sharpness is also maintained due to the plastic case, which is provided by the manufacturer in the package.

The scissors are made of steel with alloyed properties. It includes nickel content, due to which the instrument has a shiny coating that lasts for a long time. By the way, constant contact with liquid will not affect this fact at all. This may include nail polish remover solutions, water, etc.

The length is 9 cm. It is also convenient that alloying of the edges is carried out by electric spark.

Advantages

• made of hard steel, which is able to maintain sharpening sharpness;
• the stroke is adjusted using a brass screw;
• the shape is slightly curved;
• The kit includes a case;
• smooth ride;
• Suitable for use with both left and right hands.

Flaws

• overpriced. Available on the market for around 900 rubles;
• edge length 20 mm.

Equipment

Cordless electric shears can be supplied with a battery along with a charger. Such models are more expensive than analogues without a battery.

Case – facilitates transportation and storage of electric scissors, protects from damage.

The delivery set may include a brush, replacement blades, a hex key and a wrench - these accessories are used to service electric scissors. In particular, knives in sheet models are adjusted with a hex key.

TOP stationery scissors

This group of scissors is used for cutting cardboard and paper. Such models are a necessity for office workers, and they will also be suitable for use in the home. Just keep in mind that when purchasing, you should take into account the dimensions of the materials to be cut. Also evaluate how comfortable the handle is; comfort will depend on this. In terms of price, this category of goods is one of the most reasonable.

Attache 180 mm

Schoolchildren will appreciate such scissors. This is due to the fact that the handle is long and rubberized. The metal parts are insulated, which will have a positive effect when working in a child's hand.

The ring at the bottom has an increased size. This will make it easier to cut paper with a thick base. First graders often make fakes in class and at home. Another plus is that the rods are covered with rubber right up to the screw.

These scissors are inexpensive. They can be bought on the market for 140 rubles on average. The length is 180 mm, which is the optimal value for working with different paper formats.

How to make the right choice?

Before we start studying the rating, let's talk about recommendations for selecting scissors. These include:

1. Characteristics of the cut. The instrument can be right-handed, left-handed, or straight. The difference will be in which hand it is held.
2. Connection point. Scissors can be fastened with bolts or rivets. Fixation will be convenient for short cuts, eliminating ends and ends. If the center of the tool is offset, then it can be used to make longitudinal cuts.
3. Blades and their material. The crown is usually made from an alloy. The most durable will be chromium-nickel alloy.
4. The size of the material being cut. It is indicated on the pack and indicates the maximum value. The indicator can even reach 16 mm.
5. Lever. If you do not perform the procedure often, you can select a 1-component handle. If you constantly use the device in construction, then choose a two-component design. This will allow you to hold the tool securely.
6. Length. Scissors for cutting metal can reach 95 cm in length. The larger the value, the larger you can cut with one click. In some options, scissors can save effort and time.
7. Drive unit. Scissors can be manual or extended. Everything will depend on the material processed by the master.

Also, scissors are divided by purpose - professional or for amateurs, which will be described in each option and in reviews.

Professional hand metal scissors: types, rating, best models

Metal processing operations are one of the most labor-intensive processes. High strength and toughness of the material require the use of special tools. Large enterprises use high-performance equipment.

To work at home, on a construction site, during repairs, making crafts, and household utensils, you need a mobile device. A tool with an abrasive cutting disc is not always suitable. In many cases, for technical reasons, it is better to use scissors. They guarantee a more gentle operation.

What are the criteria for choosing hand-held professional metal scissors, what should you pay attention to in order to successfully use them in the upcoming work?

Benefits of using scissors

Why do professional roofers and tinsmiths prefer to use scissors rather than a grinder? The answer lies in the peculiarities of processing sheet material, where the use of mechanical tools has undoubted advantages:

• safety. Vibrations during processing with an abrasive disc can lead to its destruction. The tool can be torn out of the hands and injure the worker. The workpiece itself can be damaged;

• preservation of sheet metal characteristics. Wall, ceiling panels, roofing materials have a decorative paint and varnish and anti-corrosion coating. Under the influence of high temperature, during operation of the abrasive, it burns a millimeter or more from the edge, which reduces the performance of the product;

• low price of the product. Good hand-held professional metal scissors are cheaper than grinders. In addition, there is no need to regularly spend money on consumables;

• autonomy and mobility. The scissors do not need a power source. You can work with them anywhere. When transporting, you don't need a lot of space;

• speed of work. A professional power tool cuts faster than its electric competitor.

For large volumes of work, you can purchase manual professional hydraulic metal shears, which reduce the labor intensity of the operation. The craftsman does not need to make any physical effort to quickly and efficiently make the desired product.

Such a tool is especially valuable when high-strength steel is used. Such products are more expensive. But experts are well aware that every ruble invested in equipment pays off handsomely.

Popular manufacturers

It is not difficult to purchase a high-quality model today. The assortment in specialized salons and online stores allows you to choose the product that meets the necessary requirements.

There is no fundamental difference between domestic and foreign manufacturers in terms of performance characteristics. Today there is no longer any lag in instrument design. Thus, hand-held professional metal scissors Kraftool look no better than products under the trade name “Bison”.

In addition to the above-mentioned brands, the top sales include products from the following companies: BESSEY, 888, ERDI, Stanley, NWS, Knipex. Professional hand-held metal scissors GROSS, STAYER, LUX, Bahco are popular. Many products from these companies are considered semi-professional.

The high quality of the tool, which costs from 1,000 rubles, will allow you to perform all basic operations during repairs and construction. The most expensive models are purchased for the manufacture of complex products, when high cutting quality, accuracy and productivity are required. In most cases there are no such requirements.

Types of scissors

The tool is used for cutting sheet material. With standard configuration scissors you can cut metal up to 1 mm. Power models with an extended lever allow you to cut sheets up to 2.5 mm. By design, the range is divided into the following types:

• Direct. The shape of the blades is made in such a way that the tool does not move to the sides. Used for straight cutting of metal when straightness is important. It is impossible to make parts with complex shapes using them.

• Left. The most popular modification. Below is the blade to the left of the master. Since most people are right-handed, the configuration is optimal for them. The position of the hands and body is natural. It is more convenient to make the left radius than the right one, so the cutting scheme is made taking into account this feature. Handles are marked in red.

• Rights. Ideal for left-handed people. The cut part is to the right of the tool and it is easier to make the same turn with them. Often purchased for a kit, when it is intended to produce elements of complex shape. I have green hands.

• With an offset center. They are often called “pelicans” for their external resemblance to this bird. During operation, the curved body of the tool is completely above the sheet and does not rest against the metal. There is no need to bend the sheet when cutting, as when using standard scissors. Marking color is yellow or green. They cost slightly more than their regular counterparts.

The best hand-held professional metal scissors are made from forged metal. Unlike cast products, they are more durable and require sharpening less often. The cut is of better quality, without burrs or burrs.

Execution

Handle for two-handed operation – allows you to hold the electric scissors with both hands, which makes operation easier and reduces operator fatigue.

Rotating head – provides maneuverability of the scissors when cutting.

Anti-slip pads - make it possible to reliably hold and control the electric scissors when cutting.

LED battery charge indicator – designed to track the current battery charge level. This option reduces the likelihood of unexpected tool failure.

Choosing good models

As a rule, plumbing tools are purchased for a long time. It has been used for years, so it is important not to make a mistake when choosing. It is advisable to know the characteristics of professional hand-held metal scissors. Reviews from specialists, those who actually work in this area, can be a good assistant when purchasing.

It is important to understand which models will be optimal for the intended work, what is the thickness of the metal, what shape will the parts have? The design must allow the desired operations to be performed. Professionals often have a complete set of tools. Left, right, straight scissors. A home craftsman cannot always afford this.

You can also rely on the authority of the manufacturer. For example, by purchasing hand-held professional metal scissors from well-known manufacturers, you can be sure that they will last a long time, maintaining their performance characteristics. True, such a tool will be quite expensive. Some models cost more than 10,000 rubles.

Electric scissors "Bosch JUS10"

These electric shears for metal differ from other models in their large cutting radius of 40 mm. Moreover, its width is a maximum of 5 mm. This power tool can be used not only for cutting steel sheets, but also for copper. At the same time, aluminum surfaces can be processed with a thickness of no more than 1.6 mm. The spindle in this case is set to a length of 1.2 cm. The handle of the presented model can be rearranged.

The user can do this by pressing the latch at the base of the case. These electric shears operate from a mains voltage of 220 V. In this case, its nominal frequency must be at the level of 45 Hz. As a result, the spindle speed can exceed 2 thousand revolutions per minute. Cutting plates are included in the standard kit in different lengths. A holder for the set is also provided for the user. These electric scissors cost about 18 thousand rubles in the store.