Dishwasher in the kitchen: TOP-130 photos of the best models. Benefits of use, advice on selection and installation

Are you planning a kitchen renovation? Broken equipment needs repair? Then you need to know how to remove and remove a built-in dishwasher from furniture. When it comes to dismantling the dishwasher, many are confused: where to start, how to find hidden fasteners, what needs to be disconnected first. You will learn about this in our publication.

Do you need a dishwasher in the kitchen?

Many housewives ask this question - after all, the dishes can be washed anyway. If you wash after every meal, this process does not take much time. Of course, for a large family that lives in a cottage with live-in service, the purchase of such a unit is necessary.

What should an ordinary family do, who lives in a city apartment and the housewives do everything themselves. Oddly enough, dishwashers are created precisely for such families, and not for those where there are specially trained people who take care of the household.

Useful tips

And one more little tip. Be sure to test run the unit. There is no need to place dishes inside, but be sure to put detergent in. It will simply clean all contaminated surfaces inside.

During test use, it is necessary to monitor whether the dishwasher is working correctly. More specifically:

  • How electronics work;
  • Is water supplied in the required volume?
  • Is the water being used well pumped out?
  • How does heating occur?
  • Is the filter system working, which is responsible for the quality and efficiency of the dishwashing process?

Not all housewives use this household appliance correctly. The thing is that they never read the instructions that come with the device.

Therefore, here are some useful tips for them.

  • After one wash cycle, you cannot immediately move on to the next. Let the machine rest for a while, during which time the door should be slightly open.
  • Many dishwasher models today are equipped with a water leakage prevention system. Regardless of whether yours has such a system or not, close the cold water supply tap after each completed washing process.
  • And be sure to turn off the power supply after use - unplug it from the outlet or turn off the machine.

Advantages of an electronic dishwasher

First of all, a dishwasher simplifies people’s lives and also eliminates trivial conflicts: who will wash the dishes. At the same time, it has a lot of advantages that people don’t even suspect:

  • Save time
  • Ability to wash large volumes of dishes
  • Disinfection
  • High quality washing


The high speed of washing large volumes of dishes frees up the housewife’s time and allows her not to start the sink after every breakfast, but to wash dishes for several meals at once.

When washing, water is supplied under high pressure and is so hot that even the most difficult stains are washed off, and bacteria, viruses and fungi are killed.

The process of removing the machine

First of all , pull out the power plug from the socket and shut off the flow of water into the machine. You don't need many tools to get equipment that is inserted under a tabletop or bedside table. In order to disconnect different parts you will need a screwdriver with attachments. Removing the built-in equipment begins by unscrewing the strip, which is located under the door of the device. But it is not available everywhere. Next, unscrew the inlet hose . Place a container nearby into which the remaining water is drained. Unscrew the siphon fitting to which the drain hose is connected . It will probably be pulled to the fitting by a clamp, so it needs to be loosened or if the plastic clamp is cut off. Open the washing chamber, unscrew the fasteners that attach the device to the countertop . In order to lower the legs as much as possible, unscrew the fixing screw.

Next, they clasp the body of the machine with their hands and move it towards themselves with rocking movements. It is necessary to remove it carefully, otherwise the equipment may fall on your feet.

If the device has a furniture facade, then it is advisable to remove it in advance. You don’t have to take it off, but to avoid scratching, it’s better to take it out without the front. To remove it, open the door of the device, unscrew the screws on the inside of the door and carefully remove the facade. You need to remove it carefully, otherwise you might drop it on the floor. Dismantling will be easier if the facade is slightly moved upward and then pulled towards you. Install the device in the reverse order.

The procedure for withdrawing PMM is quite simple. Anyone can do this. The main thing is to study in detail how to remove the built-in dishwasher. For a better understanding, you can watch the video.

Disadvantages of a dishwasher

Like any device, this machine has its drawbacks. There are several main disadvantages:

  • Space required for installation. As a rule, such space is occupied by the entire lower kitchen cabinet.
  • Detergents need to be purchased separately for the car, but they are significantly more expensive. Standard household products cannot be used.
  • Installation and maintenance require separate time and money.

However, if you reconsider all these disadvantages and recalculate the cost of the time spent, then buying a dishwasher will still turn out to be a benefit.

Recommendations from experts

It is more advisable to install the dishwasher near the sink. Moreover, this applies not only to the ease of operation of the device, but also from an installation point of view, because it is much easier to connect the machine hoses to a finished pipeline than to lay the pipes again.

It is not recommended to install a dishwasher outlet behind the unit, because it will be difficult to turn it off later. The socket for the machine must be grounded.

Before you start using the dishwasher, you need to study the instructions from the manufacturer, because it contains all the rules for using the machine; this useful information will help you safely use this miracle of modern technology for quite a long time.

Desktop machine models

In addition to ordinary units, there are also desktop models on sale. However, they clearly have more disadvantages than advantages. They are comparable in cost to narrow devices. At the same time, they are, of course, inferior in power and performance.

They also do not save much space - such devices occupy the entire surface of the kitchen cabinet. Then there is no point in installing the unit on the table and taking up all the space. It will be more profitable and more convenient to install a standard narrow machine.

Should I call the master or not?

The answer depends on the consumer: if it is possible to pay for the services of a specialist and there is no desire to bother with dismantling the equipment, the problem can be solved with one call. If the user is confident that he can dismantle the built-in dishwasher himself, it makes sense to prepare for the process by first studying its nuances.

It doesn’t matter what kind of PMM you have - a prestigious Bosch (“Bosch”) or a budget model made in China, the technician will have to pay separately for dismantling. If you cannot remove the built-in equipment yourself, you will have to pay about 40 USD. e. Disadvantages of this solution:

  • you lose money;
  • you are wasting time - sometimes you have to wait a long time for the repairman.

To get the dishwasher yourself, you will need:

  • read our article;
  • watch the corresponding video;
  • prepare the necessary tools;
  • spend half an hour.

What to pay attention to

As manufacturers strive to overtake and surpass each other, with each new generation dishwashers are equipped with more and more new functions. Some of them may be very important:

Sterilization function. Allows you to quickly sterilize baby bottles. Not available in all cars.

Top tray for utensils. It will help save space in the kitchen. Takes up minimal space and is very convenient.

Loading capacity of the machine – it varies between models. Therefore, it is worth calculating in advance how many dishes will need to be washed at a time in the usual mode and in the mode when many guests have arrived.

Standard dimensions

In full-size automatic sinks, as in the bulk of large household appliances, the following parameters are observed: 60 centimeters in depth and width, 85 centimeters in height.

By adjusting the length of the legs, the height of the machine can be varied to be flush with the kitchen unit or hidden under the countertop.

Such dimensions lead to a more expanded range of functions and loading of the maximum number of sets. Preferred for purchase by large families of five or more people or those who often receive guests.

Machine in a small kitchen

When choosing and installing a dishwasher in a small kitchen, you should think about whether the machine can be installed outside the kitchen. A bathroom or hallway is suitable for this. Installation in the bathroom would be optimal, since it is easiest to connect to the water supply here.

If the layout of the apartment allows, then it is possible to install the machine in the hallway. It is important that a water connection is available.

Note!

  • Yogurt maker - choice of varieties, pros and cons of use. The best photo reviews of models with descriptions of options

  • The best electric kettles - types of functions and differences between kettle models. Reviews of popular manufacturers + 140 photos
  • Electric hob: TOP-110 photos of the best models. Advantages and disadvantages of use + tips for choosing

If you need to equip a kitchen with a dishwasher, then you should think about a narrow version of the device.

Start with a plan

Even the smallest kitchen can do without moving walls if you properly delimit the space. It is worth abandoning unnecessary items, giving preference to multifunctional and ergonomic furniture. How to fit equipment in a small room? Consider the main points:

  • Don't buy a ready-made set that can eat up a lot of space. Order furniture according to an individual project, taking into account the size and features of the room.
  • Make a detailed plan with drawings, noting where each item and equipment will be located. Calculate everything down to the centimeter. An ideal option when the interior contains the following items: cabinets and cases for storing dishes and bulk products, a table (bar counter), chairs, a sink with a cabinet, a hob with an extractor hood, a refrigerator, a washing machine and a dishwasher.
  • Use any surface. The window sill can be designed as a continuation of the work surface or tabletop. Make a storage cabinet underneath. How to place other household appliances? For example, a microwave oven and a multicooker can be mounted on brackets. This will free up space in the cabinets for large equipment.

Think in advance about what type of dishwasher you want at home so you can order the cabinet according to the size. If the headset is already installed, then measure the internal space and go to the store with the parameters that are already in stock.

Dishwasher Installation

Installing a dishwasher in the kitchen is not as difficult as it seems. To do this you just need to perform a few steps:

Prepare a niche for installing the machine. In this case, the distance from the side walls should be at least 5 cm, and from the back - at least 10 cm.

Prepare the necessary materials for connecting to the water supply: you need a long hose, a siphon and a tee. A tee is installed on the water supply pipe in front of the mixer. In this case, one end leads to the sink, and the other to the car. You can perform this operation yourself.

Install a socket for connection. The socket must have a separate cable from the panel, and the cable must have a circuit breaker.

In the event of a short circuit, the machine will turn off the power supply only to the dishwasher. The installation of the socket should only be done by a specialist.

Basic components for embedding

Below is an approximate list of what you will need for work:

  1. A set of tools (pliers, Phillips screwdriver, drill, self-tapping screws, building level).
  2. To connect the pressure water hose you will need a brass water tee.
  3. Material for sealing (tow, rubber fum tape, gaskets).
  4. Ball valve.
  5. Siphon if the appliance is installed in a sink.
  6. Clamps, crimp couplings

Important! To install a separate outlet, you will need a two-core copper wire with good insulation. Choose a moisture-resistant outlet.

Specialty chemistry

The very last nuance in the operation of a dishwasher is the selection of special chemicals. Each device requires its own type of means. There are three main types:

  • Detergent is the basis of the entire process. It is available in the form of shampoo, gel or tablets. Each device has its own type.
  • Rinse aid – removes detergent. Helps avoid stains on dishes, water stains and ensures good drying.
  • Salt for water – prevents the formation of scale and softens the water.


With proper installation of the machine and selection of detergents, the benefits of such a device are obvious.

Specifics of use

It is also worth noting some features of dishwashers so that this does not turn out to be an unpleasant surprise after purchase:

  1. You will need a separate place in the kitchen. You will have to either build in the equipment or choose a compact desktop model.
  2. To operate productively, the unit requires expensive detergents, rinse aid and a water softener.
  3. Pewter, copper, aluminum, and antique items should be sent to the sink with great care. Things can be damaged when exposed to high temperatures and household chemicals.

Photo of a dishwasher in the kitchen

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]