5 ways to get autonomous electricity for a private home

Free electricity

To date, the profitability of cryptocurrency mining farms has dropped significantly. This happened due to a fall in the market value of the virtual assets themselves, due to the rise in prices of equipment and electricity. If previously the cost of feeding a farm was about 30% of the profit, now the figures reach 50% and even 70%, which makes production extremely low-profit . It's no surprise that farm owners are starting to look for ways to generate free electricity themselves. This idea is not as fantastic as it might seem at first glance, but its implementation will require serious preparation.

Why is electricity becoming more expensive?

Still fresh in memory are the times when Russians had no to save electricity .

However, today the cost of electricity has increased significantly and will continue to increase in the future.

Tariff increases are affected by:

  • reduction of planetary reserves of fossil energy resources and increase in the cost of their production,
  • increase in electricity consumption by the population,
  • the associated increase in costs for the repair of existing and installation of new power transmission lines and more powerful transformer substations.

In addition, inflation and taxes are sources of constant growth in energy costs.

Extraction of free electricity

Miners abroad prefer to solve the problem less radically. They simply move to where energy is cheaper. If you believe the statistics, China previously charged the lowest price for consumed electricity, but after the ban on cryptocurrency was introduced, mining farmers had to relocate to Europe. Iceland has cheap electricity, but there are problems with the Internet. In Russia, you can look for regions with cheap energy to start a cryptocurrency mining business. For example, if you install a farm in Irkutsk, you can spend only 10% of your earnings on electricity. But the figure is approximate; if you use the latest equipment with high power, then its energy consumption is an order of magnitude higher.

  • This means there is only one way out - to learn how to generate free electricity at home.
  • It is possible to obtain energy for the farm free of charge at home using alternative sources.
  • They are already widely used throughout the civilized world, these are solar panels, wind and water generators.
  • But you should keep in mind that you can assemble such installations with your own hands only if you have minimal engineering knowledge, and you will also have to spend money on parts and consumables.

You can also get free energy from magnets or from the ground, but it will not be enough to power a powerful mining farm.

How to make free electricity

Therefore, it is worth considering ways to make free electricity in sufficient quantities so that it is enough to uninterruptedly power a mining farm. However, you can abandon this idea and rent someone else’s power through cloud mining sites, and mine cryptocurrency in pools (for which you need to study the topic “What is a pool” in advance).

But if the equipment is already available and the only problem is to make its operation more profitable, then it is best to learn tips for generating free electricity using video tutorials on YouTube. But before that, you still need to decide which method is better to choose.

If you live in a private house, then it is most convenient to install solar panels or a wind generator on the roof. By the way, you can also save on heating in this way: replace traditional radiators with electric ones. An alternative type of equipment can be purchased ready-made; you only need to install it in your home yourself. But the cost of the devices still deters most people. In addition, solar panels are only relevant in the southern regions, where there are a sufficient number of clear days.

Electricity production scheme

You can also extract free electricity directly from the ground. Schemes of this method are widely presented on the Internet. In the soil, due to natural oxidation processes similar to those occurring inside a conventional battery, electrical impulses are formed . But this amount of energy will definitely not be enough to power a mining farm. You can also get electricity from ordinary magnets, for which you need to wrap them with copper wire, creating something like a transformer, and place them in an electromagnetic field. But to extract the same amount of electricity from a device as from a stationary outlet, you will need very large magnets and a lot of wire.

Video: Electricity from a magnet

What it is

The term “free energy” itself appeared when internal combustion engines were widely introduced, when the problem of obtaining the required amounts of energy depended on the coal spent. Wood and petroleum products were also taken into account. Free energy is usually understood as a force that does not require spending a large amount of fuel to produce. This means that no resources are required. Including when they create a self-powered transgenerator.

Now they are creating fuel-free generators that implement similar schemes. Some of them began to work long ago, receiving energy from the sun and wind, and other similar natural phenomena. But there are other concepts aimed at circumventing the law on conservation of energy.


Tesla installation

Popular sources of renewable energy

Since ancient times, people have used mechanisms and devices in everyday life, the action of which was aimed at converting the forces of nature into mechanical energy. A striking example of this are water mills and windmills. With the advent of electricity, the presence of a generator made it possible to convert mechanical energy into electrical energy.


The water mill is the predecessor of the automatic pump, which does not require the presence of a person to perform the work. The wheel rotates spontaneously under the pressure of water and independently draws water

Today, a significant amount of energy is generated precisely by wind complexes and hydroelectric power plants. In addition to wind and water, people have access to such sources as biofuels, the energy of the earth's interior, sunlight, the energy of geysers and volcanoes, and the power of tides.

The following devices are widely used in everyday life to generate renewable energy:

  • Solar panels.
  • Heat pumps.
  • Wind generators.

The high cost of both the devices themselves and installation work stops many people from receiving seemingly free energy. Payback can reach 15-20 years, but this is not a reason to deprive yourself of economic prospects. All these devices can be made and installed independently.


When choosing a source of alternative energy, you need to focus on its availability, then maximum power will be achieved with a minimum of investments

Generator parameters

The simplest version of such a generator can be imagined as a set of several coils that interact with the magnetic fields generated around the device.

The following parameters must be considered when selecting internal elements to create such a generator:

  1. The primary coils are best made from several turns of thick wire when developing a power generator. Then the device is characterized by low ohmic resistance and low inductance.
  2. In the secondary coil, on the contrary, the number of turns is greater. And the wire itself is quite thin. With this configuration, the energy release will be maximum. The waves will travel a greater distance. It doesn’t matter which free energy generator circuit you choose using domestic parts.

The main effect is enhanced many times over if the spark gap is connected parallel to the oscillating circuit.


Simplified version

How to save electricity when heating water

The boiler not only heats the water, but also maintains its temperature at the same level all day. If you do not control the consumption of hot water, then you will have to pay a significant amount to heat it at the end of the month.

How to save hot water:

  1. Do not set the temperature on the boiler too high, this way you can reduce the energy consumption for heating water during the day.
  2. Good thermal insulation of the boiler will help keep the water hot for a long time without additional heating.
  3. If you take a shower instead of a bath, you can reduce your water consumption by three times. This is provided that you spend no more than 20 minutes in the shower.
  4. It is more economical to wash dishes once a day. But if you don't like the mess, wash your plates with hot water in a bowl and then rinse them with cold running water.

How to build a free energy generator with your own hands?

Generators are created on the basis of the following components and accessories:

  • Battery and resistor with a nominal value of 2.2 KOM. It is necessary to include it in the drawing.
  • Ferrite ring of any magnetic conductivity.
  • A capacitor with a capacity of 0.22 microfarads, designed for voltages up to 250 Volts.
  • A thick copper busbar, whose diameter is about 2 millimeters. In addition, thin copper wires in enamel insulation with a diameter of 0.01 mm are used. Then radiant installations give results.
  • A plastic or cardboard tube whose diameter is 1.5-2.5 centimeters.
  • Any transistor with suitable parameters. It would be good if the basic package, in addition to the generator, included additional instructions. Otherwise, it is impossible to implement practical schemes for self-powered free energy generators.

Interesting. In the case of additional decoupling between the supply and high-voltage circuits, a special input filter is used. You don’t have to install such a device, but apply voltage directly.

For assembly, you can use a fiberglass board or another base with similar characteristics. The main thing is that the surface accommodates the radiator with all the necessary accessories. Both coils are wound on a plastic tube so that one is placed inside the other. A high-voltage winding, also located inside, is wound turn to turn. Sometimes this is also required by homemade pulsed fuel-free energy generators.

The shape of the generated pulses must be checked for functionality when the assembly is completed. To do this, take an oscilloscope, digital or electronic. When setting up, you should pay attention to only one important parameter - the presence of steep edges that characterize the generated sequence of rectangular contacts.

How to save energy in your apartment by using electrical appliances

First, let's figure out which electrical appliances consume the most energy. These data are very approximate, but they allow you to find out which equipment has the greatest impact on the amount of electricity spent per month.

DeviceOperating time, hours/daykW/h per day
TV30.5
computer124
iron21
microwave11
multicooker, steamer61
hood81
oil heater126
fan heater25
hair dryer10.5
electric stove43
water heater 60-70 liters11
Dishwasher12
washing machine22
fridge241
freezer241.2
electric kettle11
incandescent lamp, 100W80.8

Unplug equipment you don't use

Leaving appliance plugs plugged into sockets wastes electricity. Equipment in standby mode continues to use it. When leaving home, unplug:

  • kettle;
  • coffee maker;
  • TV;
  • computer;
  • sound speakers;
  • phone chargers;
  • hair dryer;
  • food processor and other appliances.

This way you will not only save energy, but also protect your equipment from power surges and short circuits, which can lead to a fire. Your efforts will pay off at the end of the month with significant savings.

Replace old equipment with new models with a high energy saving class

Previously, manufacturers did not set themselves the goal of producing household appliances that would save energy. Today the situation has changed dramatically; energy consumption by appliances continues to decline. Devices that consume minimal electricity are among the best in their class. They are also not cheap, but the money invested in them pays off in a couple of years. Therefore, it makes sense to replace large household appliances with new models. First of all, it is advisable to change the refrigerator and washing machine. For maximum energy savings, choose a Class A appliance whenever possible.

Use electrical appliances wisely

  • Some simple rules will help reduce your electricity costs.
  • Load the dishwasher full instead of washing dishes in small batches.
  • Make sure that the refrigerator door closes tightly and do not leave it open for long periods of time.
  • When cooking in an electric oven, do not open the oven door too often so as not to reduce the heat inside the oven. Additional electricity will be needed to restore the previous temperature.
  • Set aside one day for laundry. This way you can fully load your washing machine and save money by not doing daily laundry.
  • Don't heat a full electric kettle if you only need one cup of boiling water.

Do not use electrical appliances unless necessary

Nowadays advertising forces people to buy many household appliances. Some of them really make homework easier, while others we actually don't need at all. You can prepare dinner for two every day without the help of a food processor. But it will come in handy when you make preparations for the winter.

Instead of a yogurt maker, you can use a thermos. It also does a good job of keeping the milk at a constant temperature. Instead of an electric air freshener, it is useful to use aromatic oil or simply ventilate the room more often.

Instead of using an electric clothes dryer, you can hang your laundry on the balcony.

If the house has a gas stove, then it is better to replace the electric kettle with a regular one. If you are afraid that you will forget to turn it off, then buy a kettle with a whistle.

There are many such examples. After all, our parents used to do housework without the help of sophisticated technology. Think about what devices you can do without.

Generator circuit

The minimum power from any device can be obtained in several ways:

  1. Atmospheric condensate as a source. It can be used to create a transgenerator.
  2. Ferrimagnetic alloys.
  3. Warm water.
  4. Through magnets. They require minimal conditions.

But you need to learn how to control this phenomenon in order for the effect to be maximum.


Free energy diagram

Magnetic generator

The application of a magnetic field to an electric coil is the main effect that can be achieved by using such a device. The list of main components is as follows:

  • Support coil to regulate electricity.
  • Feed coil.
  • Locking coil.
  • Starting coil, also necessary for fuel-free appliances.

The circuit includes a control transistor along with a capacitor, diodes, a limiting resistor and a load.

Creating an alternating magnetic flux is the issue in which device owners have the most questions. It is recommended to mount two circuits that have permanent magnets. Then the lines of force are organized in the opposite direction.

Self-powered

It is necessary to create a circuit that supplies the main flow of electricity to the working device. After this, the generators switch to self-oscillating mode. They no longer need external power.

This device was called “kachera”. But the correct name is blocking generator. It creates a powerful electrical impulse.

In total, there are three main groups of blocking generators:

  1. On field-effect transistors whose gate is insulated.
  2. With a base in the form of bipolar transistors.
  3. With vacuum tubes, such designs are also common.


Energy from the ether

Tesla Generators

The design involves the use of a transformer, like high-voltage analogues. The principle of operation is approximately the same as that of conventional products. At the output of this device, so-called excess energy is formed. They significantly exceed what was spent when launching the device. The main thing is to choose the right method for manufacturing a transformer and configure the device to work.

How to get energy from the ether with your own hands?

Microquantum etheric flows in many such generators are the main sources from which energy for the generators comes. You can try connecting systems through capacitors and lithium batteries. You can choose different materials depending on the performance they provide. Then the number of kW will be different.

So far, free energy is a phenomenon little studied in practice. Therefore, many gaps remain in the design of generators. Only practical experiments help to find the answer to most questions. But many large manufacturers of electronic devices are already interested in this direction.

Is it possible?

Before we consider technological schemes and answer the question “how to get electricity from the soil?”, Let’s figure out how realistic this is.

It is believed that there is a lot of energy in the earth and if you make an installation, you will forever use it for free. This is not true, because in order to receive energy you need a certain piece of land and metal pins that you install in it. But the pins will oxidize and sooner or later the energy intake will end. In addition, its quantity depends on the composition and quality of the soil itself.

To achieve good power you need a very large area of ​​land, so in most cases the energy obtained from the ground is enough to turn on a couple of LEDs or a small light bulb.

Unity of three environments

The most popular medium in this case is soil. The fact is that the earth is the unity of three media: solid, liquid and gaseous. Between small particles of minerals there are drops of water and air bubbles. Moreover, the elementary unit of soil - a micelle or clay-humus complex - is a complex system with a difference in potential.

A negative charge is formed on the outer shell of such a system, and a positive charge on the inner shell. The negatively charged shell of the micelle attracts positively charged ions in the medium. So electrical and electrochemical processes are constantly occurring in the soil. In a more homogeneous air and water environment, there are no such conditions for the concentration of electricity.

Electricity from zero and ground electrode

This method is suitable for residents of private houses if they have a ground loop. Did you know that there is often a potential difference of 10-20 Volts between the ground electrode and the neutral wire? This means they are free to use. You can increase them using a transformer.

The energy consumed in this way will not be taken into account by the meter. This voltage can be determined either with a voltmeter or by connecting a low-voltage light bulb, such as those installed in car lights or dashboards, between these two wires.

Important! Do not confuse phase with zero - it is dangerous!

It is worth noting that a separate device made of metal pins driven to a depth of more than 1 meter is used as a grounding conductor. Pipeline will not give a good result in most cases. You can learn more about grounding in a private home from our separate article.

Method 1 - Neutral wire -> load -> soil

Voltage is supplied to residential premises through 2 conductors: phase and neutral. When creating a third, grounded conductor, a voltage of 10 to 20 V arises between it and the zero contact. This voltage is enough to light a couple of light bulbs.

Thus, to connect electricity consumers to “ground” electricity, it is enough to create a circuit: neutral wire - load - soil. Craftsmen can improve this primitive circuit and obtain a higher voltage current.

Galvanic cell

The next method is simple chemistry. This is the most realistic and understandable way to generate electricity from the ground at home. For this you need copper and zinc electrodes. Their role can be plates, pins, nails. If copper is common, problems with zinc may arise, so it is easier to find galvanized iron.

You need to drive your electrodes into the ground at the same distance from each other. Let's say 1 meter deep and 0.5 meters between the electrodes. In this case, copper will be the cathode and zinc will be the anode. The voltage of such an element can be of the order of 1-1.1 Volts. This means that in order to get 12 volt electricity from the ground, you need to drive 12 such electrodes and connect them in series.

The decisive factor in such a battery is the area of ​​the electrodes; the current strength depends on this, as well as on what is located between them. In order for the battery to produce current, the ground must be moist, for this it can be watered, sometimes the zinc electrode is filled with a solution of salt or alkali. To increase the current output, you can pack more electrodes and connect them in parallel. All modern batteries and accumulators are designed this way.

In the diagram below you see another interesting implementation of such a battery made of copper pipes and galvanized rods.

However, over time, the electrodes will deteriorate and the battery will gradually stop working.

Method for generating electricity according to Belousov

Valery Belousov has been studying lightning and protection against it for many years. He is the author of books on free energy and has developed a number of solutions to get electricity from the ground.

In the diagram you can see two grounding symbols. Here one of them is a grounding conductor, and the second, next to which the letter “A” is the zero of the household electrical network. The following video demonstrates the operation of such a setup and describes the results obtained with its help:

The resulting energy is enough to power a low-power 220-volt LED lamp. This method is convenient to use in the country, it can be easily reproduced at home.

It is possible to obtain free electricity from the ground with your own hands. But it’s difficult to talk about practical application and connecting powerful consumers. You can't start a refrigerator like that. To date, the only well-studied source of electricity from the bowels of the earth is natural resources, such as coal, gas, fuel for nuclear power plants, etc.

You probably don't know:

Prey from the air

Atmospheric electricity may well be used.
Many are attracted by the opportunity to put natural elements at their service during a thunderstorm. The atmosphere also contains waves from the planet's field. It turns out that electricity can be extracted from the air on your own, without using highly complex devices.

Some methods are as follows:

  • lightning batteries use the property of electrical potential to accumulate;
  • a wind generator converts wind power into electricity, operating for a long time;
  • ionizer (Chizhevsky chandelier) is a popular household appliance;
  • Stephen Mark's TPU (toroidal) electricity generator;
  • Kapanadze generator is a fuel-free energy source.

Let's take a closer look at some of the devices.

Wind generators

A popular and well-known source of energy obtained from wind is a wind generator.
Such devices have long been used in many countries. A single installation provides limited power supply needs. Therefore, it is necessary to add generators if it is necessary to provide energy to a large enterprise. In Europe, there are entire fields with wind turbines that do not harm the environment at all.

Lightning batteries

A device that accumulates potential using atmospheric discharges is called a lightning battery.

Mining from the Earth

Despite the fact that the Earth's energy reserves are very large, it is very difficult to obtain.
It is unrealistic to do this with your own hands if we are talking about a sufficient quantity for industrial purposes. But it is possible to obtain electricity from the planet and its magnetic field on your own in small portions, sufficient to light an LED flashlight or partially charge a phone. One hopes that being able to take these small portions will not harm the globe.

Galvanic method (with two rods)

There is a known method of generating electricity based on the interaction of two rods in a salt solution (electroplating).
A potential difference appears between rods of different metals in the electrolyte.

The same parts (made of aluminum and copper) can be immersed 0.5 meters into the ground by watering the space between them with a salt solution (electrolyte). This is a way to get some free electricity.

From grounding

Another method allows you to collect electricity from grounding when used by various consumers.
For example, in a private house, the power supply is equipped with a grounding loop, onto which some of the electricity flows when the load is turned on. Specifically, alternating current flows through wires: “phase” and “zero”, the second of which is grounded and most often not dangerous. And an electric shock can be obtained from a phase wire.

The amount of electricity taken from the neutral wire is much less than from a solar battery. ( Editor's note: experimenting with this method is extremely dangerous and is strictly not recommended).

Electricity and heat in the house. How to reduce energy consumption?

With the onset of cold weather, people are increasingly turning on electric heaters. Insulating your home will help keep it at a comfortable temperature before turning on the central heating, without using electrical appliances.

Start insulating your rooms by replacing old windows with modern plastic structures with double-glazed windows. If this is not possible, then use mounting tape to insulate window and door openings. Covering windows for the winter will eliminate heat loss and drafts.

Owners of private houses should take care of good thermal insulation of external walls and roofs. If the house is well insulated, this will help keep the room warm during the cold season. In hot summer weather, such a house will be cool, so you won’t have to turn on the air conditioning. Thus, insulating the house helps to save energy both in winter and summer.

Maintain the optimal temperature in the room. It should not exceed 21 degrees. Do not turn on the heater unless the temperature drops below this mark. This way you will not dry out the air in the room and, as a result, you will suffer less from ARVI. It is better to dress a little warmer if you are not comfortable in the room at this temperature.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]