Project of a house with a mezzanine - bedroom. Free project 93/29.

Home » Texts » House mezzanine
When many of you hear the word mezzanine, what comes to mind is a utility space familiar to everyone who lived in Khrushchev, most often it was located in the bathroom or on the corridor. This is very convenient, because if you have a small living space, then you need to try to make the most of all the free space. It was on the mezzanine that all the things that were needed only from time to time, for example, skis or tools, were stored. Now, of course, housing has changed, but even if you have built a spacious house, the mezzanine will never be superfluous, especially since it has also ceased to be a small cabinet attached to the ceiling.

Bathhouse made of timber "Usovo-2" 6 by 6 with a terrace 1.5 by 3 m

What are the advantages of timber baths?

1. The documentation for a 6 x 6 timber bathhouse was prepared by experts. Everything in the drawings is thought out to the smallest detail - from the design to the utility plan.
2. The bathhouse sets were sold more than 100 times, so even minimal errors during construction were excluded.
3. The cost of a timber solution is approximately 30-50% lower than that of individual solutions.
4. A 6 by 6 bathhouse with a veranda or terrace can be built cheaper. You can make changes to the technical plan without additional payment. For example, change the size of functional areas or the location of utilities.
5. You don't have to waste time preparing the project.

Project of a 6 by 6 bathhouse “Usovo-2” with a terrace (1.5x3)

The total area of ​​the house is 34.7 m², the building area on the plot is 41 m².

Project characteristics: 5.85x5.85 (dimensions are indicated along the axes) - overall dimensions 6x6, one-story, timber bathhouse, with a gable roof, square, steam room, shower room, rest room, vestibule + terrace 1.5x3 m, - up to 50 sq. m

Options are possible - both a separate bathhouse and a house for guests and for yourself, for the first time, as a temporary country house

The classic version of the 6 by 6 bathhouse layout - no frills

Terrace - 7.9 m², vestibule - 3.8 m², rest room - 11.7 m², shower room - 4.9 m², steam room - 6.4 m²

More details ► Design and price of a 6 by 6 bathhouse “Usovo-2”

The bathhouse is not the main building, so it is advisable to place it in the depths of the site, behind the house.

This will give some privacy and increase the degree of comfort for vacationers. The ideal option is to locate the building near a river or lake, approximately 15 meters from the reservoir. but when was it..)

If you recently bought a plot of land, the bathhouse can become the main building and replace a house for a while

A bathhouse is so Russian and soulful that we are no longer amazed when we see it on someone’s property. Why be surprised? We need to build!

An inexpensive bathhouse made of 6 by 6 timber, from a manufacturer made of high-quality material, is not only a wonderful place to relax for the whole family, but also a powerful wellness center for our entire body.

Write in the comments whether you like this bath plan or not, it’s interesting to know your opinion.

Source

Portfolio

This mezzanine floor is installed in a residential complex on the ground floor for a future children's center and yoga studio for mothers. The construction of the mezzanine floor was completed in 5 days. It was necessary to strictly observe the working hours from 10 am to 7 pm, quiet time from 1 pm to 3 pm, and building regulations.

Characteristics: Area: 44 m2 Material: Channel 200 mm, 100 mm, prof. pipe 80x80, 80x40, 40x40, 40x20, 20x20 Production time: 12 days Cost: 380,000 rub.

This mezzanine floor is installed in a residential complex on the ground floor for a future cafe. The construction of the mezzanine floor was completed in 2 days. It was necessary to strictly observe the working hours from 10 am to 7 pm, quiet time from 1 pm to 3 pm, and building regulations.

Characteristics: Area: 14 m2 Material: prof. pipe 80x80, 80x40, 40x40, 40x20, 20x20 Production time: 12 days Cost: 170,000 rub.

This mezzanine floor is installed in a commercial space for a future warehouse combined with an accounting department. The construction of the mezzanine floor was completed in 3 days. It was necessary to strictly observe the working hours from 9 a.m. to 8 p.m. and construction standards, since the premises were rented in a large shopping center.

Independent planning of a 6x6 bathhouse with an attic: an exciting activity

We will send the material by email

Every owner of a country house or private home wants to have a bathhouse on his property. At the same time, I want the building to be multifunctional, look beautiful outside and inside, and occupy the optimal area. If the correct layout of a 6x6 bathhouse with an attic is chosen, then it will fully meet all these requirements. Let's consider how such projects are calculated, plus, terrace, veranda and/or balcony.

Benefits and Features

Projects and layouts of 6x6 baths are very convenient:

• the average size allows, in addition to the steam room and washing room, to build a resting place;
• does not occupy a large area on the site;
• square shape allows rational use of space;
• for 36 sq. m. you can make a spacious steam room, a shower or a small pool, a bathroom, a tipping bucket, a relaxation room and a small hallway;
• the layout of a 6x6 bath house with an attic increases the usable area by almost 2 times;
• minimizes heat loss from the bath;
• helps create a spectacular exterior of the building.

In addition, the space under the roof can be used as a billiard room, gym or guest bedrooms. The last option is especially relevant when the main house has not yet been built - during this time the owners can live in the attic.

When creating the design and layout of a 6 by 6 bathhouse, you should pay special attention to insulation, steam and waterproofing of the upper floor so that there is no condensation. And also think about high-quality ventilation of all rooms.

Project and layout

The layout of a 6x6 bathhouse makes it possible to implement many ideas. If we limit ourselves to only a standard set of rooms (rest room, steam room and washing room), then they will be spacious and roomy. In this case, the place for relaxation should be larger than the steam room, since usually 2-4 people steam, and the whole company relaxes. In addition, you will need space for a large table, benches, and fairly wide aisles. It should be borne in mind that in winter it will be cool without at least a small vestibule. It is also convenient to leave shoes, outerwear in the dressing room to keep them moisturized, and firewood.

The layout of the 6 by 6 bathhouse also includes other rooms mentioned above. So for a full bathroom you will need only 1.5 square meters. m., for a shower room - 3-5 sq. m. If the recreation room is reduced in size, then you can build a small swimming pool 2x4 m or provide a dousing bucket.

Bathhouse with attic

An interesting design for a bathhouse with an isolated attic, when the staircase to the 2nd floor is located in the hallway and to get to the top you do not need to enter the territory of the bathhouse complex. There are 3 rooms in the attic (office and 2 bedrooms).

Bathhouse with terrace

By “terrace” we mean open flooring, but:

• if you provide a balcony in a bathhouse with an attic, then the open area will be protected from precipitation from above and from wind from the sides;
• the roof or attic can be made external and supported on poles;
• the terrace can protrude beyond the projection of the roof, getting as close as possible to the landscape;
• be a two-level or terrace-deck extended along part of the perimeter of the bathhouse or an attached deck of various configurations;
• have different types of fencing.

If the size of the recreation room does not allow you to create a full-fledged swimming pool, you can create it here or nearby, under a canopy.

The layout of a 6x6 bathhouse with a terrace depends on the area of ​​the latter:

• 4 sq. m is enough for a tea ceremony;
• 2 m width - in case of extension along 1-2 sides of the bathhouse;
• 10-20 sq. m - for receiving guests.

The advantages of a bathhouse with a terrace include:

• an outdoor recreation area appears or increases;
• protection of the entrance from adverse weather conditions;
• additional decorative element of the exterior.

The view from the terrace should provide aesthetic pleasure, so the surrounding area should be landscaped accordingly (flower beds, lawn, conifers, alpine slide, rock garden, fountain). The deck can be close to the pool or have a path (stairs) to it.

Corner bath

The main advantage of the 6 6 bathhouse layout in the corner version, as opposed to the square one, is its energy efficiency. Since the stove is located in the center of the structure, the heat spreads evenly to both wings and is retained longer. While heating a bathhouse with a square configuration will require significantly more firewood to make it comfortable in all rooms.

In addition, such a bath can be located in a corner, on a small or irregularly shaped area.

The classic layout assumes the following arrangement of zones:

• the steam room and the relaxation room meet at right angles;
• a through-type heater with an elongated firebox is in the center of the plan, which allows heating the entire volume of the structure as efficiently as possible;
• possibility of creating an interesting terrace.

But despite all the positive aspects of the structure, one should take into account the difficulty or impossibility of constructing an attic or a significant loss of usable space in it. The interior space of the bath itself will also decrease.

Bathhouse with veranda

A bathhouse with a veranda under one roof allows you to admire the landscape beauties while staying warm in the cold season.

Here you can install a small barbecue oven and provide a vestibule.

The veranda can be larger than provided for in the standard layout or even built separately and not affect the design area of ​​the bathhouse.

Bathhouse with dressing room

A dressing room, as such, in a relatively small room (36 sq. m.) will take up a lot of space, which is better used for other, more priority purposes - to enlarge the steam room, for a bathroom or a plunge pool. But a small dressing room, perhaps with a wardrobe, would be quite appropriate.

Sample Project

• When concluding a contract during measurement, a discount of 5,000 rubles is fixed

You can get a cost estimate over the phone right away!

The construction of a mezzanine allows you to optimize space and divide the room into functional living areas. One of the most popular solutions is to arrange a bedroom upstairs and a living area or office downstairs.

What to consider when arranging mezzanines

The construction of a mezzanine floor should only be trusted to professionals. Specialists will inspect the premises, calculate the capabilities of load-bearing structures and develop an individual project that takes into account technical conditions, apartment layout and individual wishes of the customer.

If you need a bedroom on the mezzanine floor, please contact. We have our own production, have extensive experience and are ready to realize any of your wishes and ideas.

The benefits of cooperation include:

• a full range of works on planning and manufacturing mezzanines (from project development to installation);
• the ability to implement any design solution (you can see design examples in the portfolio section on our website);
• ensuring the maximum level of security.

Cost of work

The cost of arranging a mezzanine floor depends on the following parameters:

• type of construction;
• technical specifications;
• features and layout of the premises;
• customer wishes for appearance.

In any case, you can count on competitive, reasonable prices. We do not resort to intermediary services and carry out all stages of the work ourselves. By contacting our company, you get a mezzanine floor at manufacturer prices.

How to place an order

You can order the arrangement of a mezzanine floor for a bedroom by contacting the managers. Our specialists will tell you in detail about the terms of cooperation and the necessary stages of work and calculate the cost of your order.

Project manager Alexey Korablev and architect Artem Bobrov from the Zrobym architects studio named this modular house in the Uzgorye dacha cooperative in the Minsk region SMUGA, which translated from Belarusian means “haze, fog.” This unusual interior in eco-style was created for an elderly woman who spends the whole summer at the dacha, but does not want to sacrifice comfort during this time.

What to consider when planning

When choosing a particular project or planning independently, you should be guided not only by your own desires, but also rely on existing standards. The size of the compartments in the bathhouse, based on the expected number of visitors, should more or less meet the following standards for 1 person:

• 1.5 sq. m. – steam room;
• 1.5 sq. m. – washing room or shower room;
• 1 sq. m. – rest room;
• 1.3 sq. m. - vestibule;
• 0.8 sq. m. - locker room.

The shelf in the steam room must be at least 180 cm long and 90 cm wide. The furnace firebox must open into the rest room.

The rooms in the building are arranged in the following sequence, starting from the entrance:

• vestibule, if provided;
• locker room, if provided;
• restroom;
• dressing room, if provided;
• washing room (shower room);
• steam room

A shower or font is often combined with a dressing room in order to save space.

Modern mezzanine floor

Often modern frame house projects contain this newfangled trend, so let’s figure out what it is. A modern mezzanine has several important functions:

• shelf installed directly under the ceiling (classic option);
• a small platform installed under the ceiling and occupying no more than 30% of the room’s area, a kind of convenient attic substitute.

Undoubtedly, an extra shelf for the owner is always good, but the mezzanine area looks much more interesting, because it is a room within a room with a solid space.

So, you have built a frame house, a mezzanine

Is there anything that can be placed on it? Yes, anything, and even more, because this is a whole room where you can install an extra bed or even a play area, install a TV and a couple of soft poufs. If the roof is installed high, then you can make a comfortable office in the extra space. Here everything depends purely on your imagination, the main thing is that the construction of frame houses allows you to turn them into reality.

Which material to choose

Before building a bathhouse, a natural question arises about the building material. The internal microclimate, durability and appearance of the building largely depend on it. The constant exposure to steam, water and high temperature should also be taken into account. From time immemorial, bathhouses were made of wood and it is not surprising - this is perhaps the best option today:

1. Such walls are vapor permeable, this is especially important for a bathhouse.
2. Wood has low thermal conductivity, which helps retain heat indoors.
3. Wood withstands temperature changes.
4. Coniferous species, when using special compounds, can withstand moisture for a long time, especially larch.
5. The natural smell of wood promotes complete relaxation.

High-quality materials, be it timber, logs or boards:

• should not have dark spots;
• the core of the timber should be of a uniform shade, slightly darker than the outer fibers and occupy less than ¾ of the section;
• minimal amount of resin and branches;
• loose cut structure is unacceptable;
• humidity up to 20%.

The latter indicator is measured with a moisture meter in the presence of the customer. If such a service is not provided, then you should think about the feasibility of the purchase.

Wooden baths are built from rounded or chopped logs and edged, profiled, glued timber.

Chopped log

Manual felling means harvesting wood using axes and saws, followed by processing with a scraper. In this case, the bark is removed white, but the hard layers remain. The work is very hard, requiring dexterity, physical strength and knowledge of the matter, it can only be performed by specialized craftsmen. This undoubtedly affects the final cost of the material.

To eliminate unevenness and equalize the diameter, planes and debarkers are used. This log has many advantages:

• not subject to mechanical and climatic influences, moisture;
• the natural texture and pattern are unique, and the buildings are unique and authentic;
• thermal insulation is higher than that of rounded logs and timber;
• no finishing required;
• very long service life.

If the material is prepared according to all the rules, then it has no shortcomings. The construction of a bathhouse and the preparation of logs should be trusted only to professionals, then there will be no gaps, cracks, different diameters and, as a result, loose laying and “cold bridges”, cracking due to non-compliance with technology.

Video description

About the hand-cut sauna and its cost - in this video:

Rounded log

The bark is removed from this material using cutters using special equipment, resulting in a perfectly flat surface and a strictly cylindrical shape. Laying is simplified, the logs fit tightly to each other without forming gaps. The buildings turn out to be neat, although somewhat monotonous in appearance.

Although the production itself is cheaper and faster, the final cost is not much cheaper than chopped logs. Since natural protection in the form of cambium and sapwood is removed, the wood becomes susceptible to pests, rot, mold and requires treatment with fire retardants, antiseptics, and special varnishes.

Edged timber

The cheapest material in this segment has a rectangular cross-section and a length of up to 6 m. It is made from various types of trees, but for the construction of a bathhouse it is better to take larch or alder. But pine is more often used, since it is available and costs less.

For a bathhouse, a beam with a cross-section of 10 x 20 cm is most often chosen, but in regions with a harsh climate, the thickness of the walls can be 30 cm. The beam is often made from undried wood, and in the process of evaporation the material will deform and crack, so it will create smooth walls. To prevent this from happening, be sure to check the humidity level before purchasing.

Profiled timber

This lumber with grooves and protrusions is made from solid edged or glued beams. If the timber is of high quality, then with good insulation, “cold bridges” are eliminated. Compared to edged lumber, it does not shrink, looks good without finishing, and is significantly more expensive. The glued version is not recommended for use in the construction of a bathhouse, since under the influence of high temperature and humidity it may begin to release toxins.

Bathhouse with attic, balcony and bathroom (B-20)

Name	Cost, rub)	Unit
Construction of foundations on screw piles or reinforced concrete foundations	8-921-930-69-80, 8-926-742-95-01	Email: [email protected]
Decorative finishing of the base - pick-up (learn more)	from 1700	linear meters
Installation of reinforced concrete slabs 500*500*100 mm under support pedestals (learn more)	1400	PC.
Protection (backing board) of the first row of strapping made of larch boards 50*150 mm (learn more)	550	linear meters
Protection (backing board) of the first row of strapping made of larch boards 50*200 mm (learn more)	660	linear meters
Double strapping made of timber 150x150mm	440	linear meters
Double strapping made of timber 150x200mm	550	linear meters
Installation of floor joists made of timber 150x100mm	440	linear meters
Installation of floors from larch terrace boards “corduroy” (for open terraces) (learn more)	3100	m*2 floors
Installation of finished floors from tongue-and-groove larch floorboards 27 mm (learn more)	3100	m*2 floors
External walls made of profiled timber are moisture resistant with a cross-section of 145x140mm, partitions are made of profiled timber. humidity section 145*90 mm	4400	linear meters external walls
External walls and partitions made of kiln-dried profiled timber with a cross-section of 145x90 mm	3900	linear meters external walls
External walls made of profiled kiln-drying timber with a cross-section of 145x140 mm, partitions made of profiled kiln-dried timber with a cross-section of 145x90 mm	6600	linear meters of external walls
External walls are made of profiled timber. humidity with a cross section of 145x190mm, partitions made of profiled timber. humidity section 145*90 mm	8100	linear meters of external walls
External walls are made of profiled chamber-drying timber with a cross-section of 145x190 mm, partitions are made of profiled chamber-drying timber with a cross-section of 145*90 mm.	10500	linear meters of external walls
Set of kiln-dried lumber (learn more)	1600	m*2 building area
Pairing crowns with a wooden dowel	1600	linear meters external walls and partitions of the log house
Assembling a log house using a SPRING UNIT FORCE (learn more)	4400	linear meters external walls and partitions of the log house
Assembling a log house with a tie with steel studs	2900	linear meters external walls and partitions of the log house
Corner groove-tenon connection (warm corner)	9300	one corner of the log house
Corner connection “into a bowl” (more details)	from 16 000	one cut
Inter-crown insulation – holofiber (learn more)	from 440	linear meter of external walls of the log house
Increase in ceiling height by 14cm (+ one crown in the log house)	from 1000	linear meters external walls
Insulation 150mm	700	m*2 insulated area
Insulation 200mm	900	m*2 insulated area
The construction of a staircase on strings made of laminated veneer lumber, with wide steps, turned pillars, balusters and a figured handrail.	37000	PC.
Roof covering – metal tiles RAL 3005,5005,6005,7004, 7024,8017)	1000	m*2 roof
Roof covering – corrugated sheeting with polymer coating (RAL 3005,5005,6005,7004, 7024,8017)	550	m*2 roof
Installation of a drainage system (PVC, DEKE)	1900	linear meters roof slope
Installation of corner snow barriers (more details)	1100	linear meters roof slope
Construction of tubular snow barriers (more details)	2200	linear meters roof slope
Attic structure: sparse flooring made of edged boards along the ceiling beams, a door in one of the gables + a dormer window in the opposite gable	1000	m*2 ceiling
External finishing of gables – house block spruce/pine AB 28*140	1100	m*2 gable area
External finishing of gables - imitation timber 18*140 mm	800	m*2 gable area
Treatment of the entire building with fire-bioprotective composition NEOMID (learn more)	1400	m*2 building area
Surface treatment with NEOMID terrace oil (learn more)	440	m*2 floors
Treating the walls and ceiling of the steam room and washing room with NEOMID varnish “for baths and saunas” (learn more)	660	m*2 walls and ceiling
Treatment of the ends of the log house with NEOMID TOR PLUS (learn more)	1000	opening/corner
Treatment of shelves in the steam room with NEOMID oil (learn more)	2000	m*2 shelf
Finishing walls and ceilings with washing clapboard made of larch 14*90mm (learn more)	2100	m*2 walls and ceiling
Installation of a “drip floor” in a washing room (more details)	9300	m*2 floors
Finishing with paired lining OSIN A, including shelves - OSIN A	880	m*2 walls and ceiling
Finishing with paired lining LIPA A, including shelves - LIPA A	1900	m*2 walls and ceiling
Finishing with paired lining LIPA EXTRA, including shelves - LIPA Extra	2100	m*2 walls and ceiling
Finishing with paired lining ALKHA Extra, including shelves – ALKHA Extra (learn more)	2900	m*2 walls and ceiling
Finishing with paired lining ABASH EXTRA, including shelves - ABASH Extra (learn more)	3600	m*2 walls and ceiling
Installation of an insulated steel door made in Russia (more details)	from 20000	PC.
Installing a glass door in a steam room (learn more)	from 15 000	PC.
Installing the inlay on the door wedge	6 600	PC.
Installing a beautiful linden door (more details)	from 6600	PC.
Installation of PVC windows with single-chamber double-glazed windows	from 8000	PC.
Installation of PVC windows with double-glazed windows	from 9300	PC.
Installation of a heat exchanger in the ERMAK furnace, installation of a remote tank (stainless steel 60 l) on the wall of the washing room, supply of hot water using metal-plastic pipes	31000	PC.
Installation of a tank (stainless steel 50 l) on a pipe above the stove, with a tap leading to the washing room	21 000	PC.
Installation of another ERMAK furnace (more details)	from 14 000	PC.
Stones for the stove (more details)	from 660	box 20kg
Bath furniture (more details)	from 660	PC.
Installation of a protective screen around the furnace (brickwork)	29 000	PC.
Chimney device made of stainless steel 0.5 mm thick (includes a protective screen and a stainless steel inlet sheet)	from 20 000	set
Chimney device made of stainless steel 0.8 mm thick (includes a protective screen and a stainless steel flue sheet)	from 26 000	set
Delivery over 400 km from Pestovo, Novgorod region. Attention! Please review important shipping cost information.	150	km
Construction shed 2.0*3.0 / 4.0 m (more details)	from 30 000	PC.
Garden toilet 1.0*1.0 m (more details)	from 15 000	PC.

Review of typical projects

What to pay attention to

When you have decided on the project and materials, you need to choose a place for construction, type of foundation, finishing and roofing. Don’t forget about the stove - if the heater for the steam room does not have much weight, then for a massive fireplace in the recreation room and a wide pipe passing through the attic, a separate foundation will be required. Also at the foundation stage you need to take care of communications and the pool bowl.

To prevent your feet from freezing, it may make sense to think about warm floors, for comfort in the attic space - about insulation, interfloor and roof vapor and waterproofing, ventilation. Don’t forget about the latter when laying the lower crown of the walls. The wood must be treated appropriately.

Summarize

In conclusion, we can say that if you want the most functional under-roof space, then you need to take care of this at the stage of designing the house. This allows you to get free additional space for your household needs. In this case, you won’t have to add anything or insulate it, the size of the mansion will not increase, but you will make the most of the free space and give the appearance of the house a zest. As you can see, there are no disadvantages or pitfalls.

is engaged in the construction of private cottages using frame technology. In our work, at the request of the client, we are ready to take on the mezzanine floor. We hope that everyone will appreciate this innovation. We work both on our own projects and on original ones. We take on even the most difficult options, because this is always a challenge to our professionalism. We are waiting for your requests!

How to choose a place

According to the norms and rules, the bathhouse should be located no closer than 12 m to the well, 8 m to the house and the neighboring plot, 3 m to the fence. It should be placed on the leeward side of the main buildings (house, summer kitchen, gazebo) so that the smoke is carried away to the side. Besides:

• for better outflow of water, the place for the bathhouse should be elevated or have a raised foundation (pile or strip);
• in the absence of a central sewerage system, a drainage pit is placed at a distance of 5-6 m, drainage is made at the bottom, the walls are laid out with bricks and concrete;
• It is advisable to plan the bath so that the steam room faces south for faster heating.

Also, when drawing up a project, it should be taken into account that due to the thickness of the walls, the internal area is less than the total.

The durability and functionality of the bathhouse depends on who will implement the project. Therefore, you should choose only a professional company. It may not be mega popular, but it must have good specialists on its staff to avoid substandard services. There is also special equipment, photo reports on completed projects of similar baths in the portfolio. Based on photos of already completed work, you can estimate 30% of their quality.