Do-it-yourself chicken coop: preliminary preparation and step-by-step manufacturing instructions

Many owners of suburban areas are thinking about running a personal subsidiary plot (LPH). Some people plant vegetables and herbs in greenhouses, others want to organize a mini-farm and raise some kind of animal. For example, rabbits or chickens. It is believed that this is both profitable and useful. There will always be dietary meat and eggs on the table, and the surplus can be sold. As a rule, most people, to test their strength, start with chicken farming and build chicken coops with their own hands. To make your task easier, we offer our readers three options for chicken coops to suit every taste and budget.

Basic requirements and conditions

Before starting construction, it is important to familiarize yourself with the key conditions and requirements:

Chickens are birds. This means they can fly at least a little. In this regard, it is important to provide a minimum fence (about 2 meters), and best of all, to equip a roof.
They hunt chickens. Stray dogs, foxes, ferrets, martens and even rats are potential chicken killers. The structure of the building should protect the birds from any intruders.
One ferret can destroy a family of 20 chickens in one night. Therefore, barrier devices must not only be of high quality, but also be as practical as possible. A reliable solid wooden fence or a fence made of corrugated board will serve as good protection. Additionally, you can get a mesh fence, along which you need to plant a dense hedge of tall shrubs. Such an obstacle will protect birds not only from animals, but also from people.
Shrubs. The presence of tall bushes along the homemade chicken coop will protect the birds from sunlight and wind. Chickens love shade in hot weather and don't mind eating the leaves and insects that breed among last year's leaves under the plants. Thanks to the presence of insects and worms, the chickens' diet will expand, which is an additional plus.
Purity. Where there are chickens, there is droppings. The chicken coop should be designed in such a way that it is easy to clean (hinged walls/doors, retractable coop bottom, etc.). To prevent people from suffocating from these odors, it is recommended to build a chicken coop as far away from residential buildings as possible.
Ventilation should also be mentioned: if there is no flow of fresh air, the chickens will die in a matter of days. But ventilation protection must also be at its best - predators are able to get anywhere for prey.
Winter season. If chickens will be kept indoors year-round, then even at the time of designing the chicken coop, serious waterproofing should be provided. Winter is ice, and ice is water, which means there will be increased dampness, which chickens fear on an instinctive level. Consequently, their productivity and egg production will decrease significantly. Additionally, insulate the chicken coop and take care to exclude drafts (in winter, gusts of wind occur more often).
Required area and planting density. The design of a chicken coop should be based on 1 square meter. m for 4 adults (15 chickens). However, if chickens are kept not for the purpose of breeding, but for the sake of eggs, then per 1 sq. m there should be no more than 2 individuals.

If you are creating a small chicken coop, its minimum area should be at least 3 square meters. m.

For a homemade chicken coop for 20 chickens (19 laying hens, 1 rooster), the appropriate dimensions are 2.5 x 6 m, that is, a total area of 15 square meters. m. If you need a chicken coop for 10 chickens, then the dimensions can be significantly reduced: 2.5 meters in width and 3 meters in length is the best option.

For a large number of chickens, you can slightly reduce the total area of the chicken coop. The fact is that chickens will fight for a “place in the sun”, huddling in small groups. This allows you to reduce the area, but only slightly, otherwise the chickens will begin to conflict, pecking at the weaker ones.

Next to the chicken coop there must be an enclosure for walking, with dimensions of at least 3 x 3 m. It is best for the walking yard to have 2 square meters. m of free space per 1 adult.

To make the chicken coop as comfortable as possible for the birds, it is necessary to provide shade, safety from predators and protection from the sun/wind. These are ideal conditions for keeping chickens in a homemade chicken coop.

Ventilation

In summer, doors are usually opened for ventilation, but in winter this process must be strictly regulated. Without ventilation, harmful ammonia fumes from chicken droppings accumulate in the chicken coop and the walls can rot. Stuffiness also harms chickens.

Typically there are two types of ventilation:

natural - holes with doors are made on opposite walls;
forced - fans are installed in the holes, which can also be completely closed.

Preliminary preparation

Before the actual process of building a chicken coop, you should carefully consider every aspect of the actions and requirements. To begin, design the future structure and decide on the materials, location, shape and type of chicken coop.

Chicken coop design

Determining the required area of a structure is key when drawing up a construction plan. Not only the chicken coop itself is taken into account, but also the area for walking the chickens.

When developing a project, pay attention to the following points:

1Location of the structure

Under no circumstances should the place be in a low area. There are many reasons for this:

after rains, water will accumulate there;
the place itself will always be damp and dry out slowly (atmospheric moisture is concentrated there);
in the lowlands the morning fog lasts the longest, etc.

It makes the most sense to place the structure on a small hill.

2 Chicken coop area

Dimensions are calculated individually. For every 5 laying hens, a minimum of 3 square meters must be allocated. m. Only in such conditions will normal coexistence and development of individuals be ensured. That is, the total size of a chicken coop for 5 chickens with such requirements will be 1.5 x 2 m (excluding the exercise yard).

If the chicken coop is being built for only 2-3 chickens, then the area may be even smaller. Premises of 1 sq. m will be more than enough.

The area for walking chickens should also be created taking into account the number of individuals. For the already mentioned 5 chickens, about 6-7 square meters are allocated. m of walking space. The more active the chickens’ lifestyle, the higher their egg production rate will be.

3Protecting the walking area

Wind protection should be provided for the walking area. An canopy installed over the enclosure, which will also protect the chickens from sunlight, rain and predators, will ideally cope with this task.

4Location features

It is strictly recommended to install the chicken coop on a hill. It can be created using an embankment made of layers of sand and crushed stone of the middle fraction. In addition to the stated benefits of this arrangement, it will also act as an obstacle for predators. Additional protection will be laying a layer of clay mixed with broken glass on top of the embankment.

5Ceiling and windows

Windows or doors provide natural light during the day. A reasonable solution would be a glazed door, but all this needs to be installed on the south-eastern side of the chicken coop - on this side the sun will illuminate the building the longest.

If the window is separate from the door, it should be installed at a height of 1.1-1.2 m from the floor, and the size should not be less than 50 x 50 cm. The ceiling rises to a height of 2-2.2 m so that there is a large volume of air space for chickens.

6Remote sockets

It is wiser to install nest extensions outside the coop so that they extend beyond its boundaries and have a size of 40 x 40 cm (minimum). The lid should lift easily so you don't have to go inside the coop to pick up the eggs.

Choosing a chicken coop

To build a good structure, you need to be responsible when choosing a chicken coop. This process depends on the following factors:

1Breed of chickens

All chickens are divided into 2 large groups: laying hens and meat chickens. For laying hens, space, lighting, fresh air and the opportunity to walk are important. In such conditions they will lay many eggs almost all year round.

But meat breeds should be kept as close together as possible so that they cannot walk around the chicken coop one more time and lose weight. Such breeds are kept only during the warm season, which means there is no need to heat the chicken coop.

2Type of walking

The walking area can also be of two types: open and closed. What was mentioned earlier are closed areas. They are good if the chicken coop itself is located in close proximity to a forest or fields. That is, where there is a danger of attack by predators.

With open range chickens leave the coop and walk around a large area, pecking at fresh grass. This will have a positive effect on their comfort, but there is also a risk of contracting a disease or being harmed by weasels, rodents and other predatory animals.

The choice of chicken coop also depends on this, since the absence of an enclosed run frees your hands when creating a building. And its necessity, on the contrary, forces us to design the future structure more compactly.

3 Number of chickens

The more chickens, the larger the coop you will need. Experts in breeding and keeping chickens advise allocating 3 square meters for 5 chickens. m of space. Accordingly, as the number of individuals increases, the size of the structure should also increase. This is worth paying special attention to, because it is possible to redo the roof or walls, but expanding the total area will be extremely problematic.

Every poultry farmer should remember that you should never completely copy a finished chicken coop design, even if it is executed flawlessly. If you forget about at least one individual, but important factor, the negative consequences will be significant.

Materials and tools

The materials for a homemade chicken coop will be needed:

foam blocks;
wood;
old window frames;
cement;
crushed stone;
bars;
plywood;
brick;
cinder blocks or shell rocks.

Foam blocks are the best choice for construction due to ease of installation. They also retain heat well, but their cost is significantly higher than other materials.

The most economical option would be to build a chicken coop out of wood. Moreover, the appearance of a wooden structure will fit perfectly into the countryside. Wooden chicken coops are extremely environmentally friendly.

Perches should be sanded using sanding devices. Also, all wooden parts are treated with impregnations against fire, insects, mold and rot. For this purpose, only environmentally friendly liquids are used.

To build the walls of the chicken coop, you can use brick or cinder block. These materials will cost several times less than foam blocks, and their strength and durability are quite satisfactory. The only negative is that brick chicken coops need to be provided with additional insulation.

As for the roof, it can be made from:

slate;
corrugated sheets;
metal tiles.

Both for the chicken coop itself and for the chickens, the material from which the roof is made is absolutely unimportant. Therefore, you should select the most economical option that will provide warmth and not allow moisture to pass through. And to insulate the roof you will need rolled insulation or expanded clay.

When building a chicken coop you will need the most standard set of tools:

hammers;
nails/screws;
screwdriver;
saw;
shovel;
roulette;
axe;
Master OK;
plane.

All of the above are basic tools that will definitely come in handy. However, it is impossible to say with certainty whether all this will be enough, since each structure is built according to individual requests, drawings and requirements.

Additional materials that may be useful:

sand;
construction rods;
beams or boards for perches;
lime for wall treatment;
polystyrene foam and sawdust as insulation;
roofing felt for foundation and roof;
ventilation box;
nest boxes;
dowels (wooden nails).

Location

The requirements and conditions for the location of the chicken coop were described in detail earlier:

on a hill;
in a quiet and peaceful place;
far from the road (literally as far as possible from the roadway);
at a distance of more than 3 meters from residential buildings.

Silence is very important for any chicken coop. Can a hen hatch eggs productively with constant noise? Of course no. And no amount of soundproofing will help, so during preliminary preparation, choose a quiet place.

Deciding on the number of chickens

Our goal is to give an example of a business plan for a beginning farmer who relies on his own strength in everything, not on lending and investment. And exclusively on their own economic capabilities, and minimal ones at that.

Therefore, we will take the bare minimum: 30 – 100 laying hens. Knowing the initial threshold, you can always calculate a business plan for both 500 and 1000 birds. However, 30 - 100 chickens are suitable for personal consumption, not for business. This means that you do not need to register an individual entrepreneur. You can register as an NPA payer (self-employed) and carry out business legally. The tax is a minimum of 4-6% and there is no need to buy additional equipment.

A poultry house for 100 chickens does not require a large area . Caring for birds, timely waste removal and absence of odors does not create problems with neighbors. Therefore, the best business option is a personal subsidiary plot (LPH).

Private household plots are not a commercial activity, so there is no need to register with the tax service. However, permitting documents are needed; to obtain them, simply contact the local administration.

To sell an egg “fully legally”, you need a veterinary certificate of form No. 4, to obtain it you must contact the department of veterinary supervision.

Step-by-step instructions for building a chicken coop

The first step is to draw up a drawing of the future chicken coop. This is what a structure for 10 heads looks like:

Foundation

Creating a foundation for a chicken coop should be taken as responsibly as possible:

1Marking

On the site selected for construction, the area for the foundation is marked. At the corners of the marking, steel rods are driven into the ground, connected to each other with a rope. Measurements are taken of the length of the sides and the diagonal between the corners, which will help ensure that the markings are correct.

Each of the corners should be straight, and the opposite sides and diagonals should be perfectly straight. If everything matches, you should drive in the pegs that act as the centers of the future pillars. The distance between the pegs is 1 meter.

2 Digging a hole

A hole 50 cm deep is dug along a given perimeter. Sand is compacted onto the bottom with a cushion. The larger it is, the better. Dry sand cannot be used, only wet sand.

3Concrete solution

To prepare the solution, you need to divide it into 7 parts and add materials in certain proportions:

crushed stone - 3 parts;
sand – 2 parts;
cement – 1 part;
All this is mixed with water - 1 part.

The mixture is poured into the hole at ground level, leveled and left to dry for a couple of days (about 3 days).

4Lifting

After the concrete has dried, you need to build up the pillars using cement and bricks (20-30 cm high). The width of the pillars is determined individually, but for a distance of 50 cm, 2 bricks for each row will be enough. Evenness should be controlled by the level (spirit level).

5Bookmark a layer

After the foundation is finally laid, it will need to be covered with waterproofing material (for example, roofing felt), on which the first row of timber is placed. For a stronger connection, cuts are made in the corners. At this point the foundation can be considered ready.

Chicken coop walls

Once the foundation is ready, you should choose the material to create the walls. It would be reasonable to use, as noted, wood. But you can give preference to any other material that will also perform its functions well and meet key conditions.

First, 4 load-bearing beams are installed. They are attached to the beams in the foundation using separate ground beams with a cross-section of 10 cm, the angle of which should be 45 degrees relative to the walls and floor.

The frame beams should be connected with beams and strengthened in the manner mentioned.

The outer and inner parts of the chicken coop are lined with chipboard, fiberboard, plywood and boards, taking into account the space allocated for lighting and ventilation. Some kind of insulation, for example, mineral wool, should be laid between the layers. When upholstering, it is critical to eliminate any gaps or uneven areas to ensure the coop is as airtight as possible.

After all actions, the boards are treated with a special solution. In stores in the relevant field there is a fairly extensive selection of these products (for example, MDS mineral sealing solution).

Roof, ceiling and floor

Creating a roof begins with laying the ceiling beams on the supporting beams. Their distance from each other should be no more than 1 m. For this purpose, a beam with a section of 15 x 10 cm is used, laid on the edge. Immediately after this, they need to be covered with transverse boards and insulation.

It is recommended to create a gable roof for the structure. This will provide guaranteed protection against precipitation, even very heavy ones.

When creating a gable roof you should:

Take care of another vertical type beams right in the center of the short side of the structure.
Attach rafter holders to them. The angle should be 50 degrees and 35 degrees to create a slope for precipitation to escape.
The rafters are placed on holders on each side.
For roofing, you can use slate or similar material.

Laying the floor is completely identical to the ceiling. The only difference is that it is allowed to use a square beam with a cross-section of 15 cm.

Next, it is recommended to lay a rubber coating on the floor (for tightness), which will prevent the formation of mold and other infections.

Next, floorboards are laid, attached to the beams with self-tapping screws or nails (20-35 mm long). All cracks in the floor and near the walls are coated with an airtight solution that is completely safe for chickens.

It may also be necessary to lay a thermal insulation layer in the floor so that during the winter season the heat of the chicken coop does not go into the ground. The cold significantly increases the likelihood of chickens getting arthritis in their legs and other colds.

Ventilation

Good ventilation will help control the temperature and humidity of the air, however, to do it correctly, you need to decide on the type of hood.

If the chicken coop is not designed for keeping chickens on an industrial scale, natural supply and exhaust ventilation works well:

2 pipes with a diameter of 19-22 cm and a length of 190-210 cm are required.
2 holes are made in the roof. The air exhaust pipe should be placed above the perches. And the inlet, through which street air will flow, is as far as possible from the chickens.
The exhaust pipe is installed significantly higher than the roof, about 1.5 m. Only a small part of it should remain inside the chicken coop - no more than 30 cm.
The supply pipe is installed completely the other way around: most of it will be located indoors, no more than 30 cm from the floor.

The principle of operation of such ventilation is comparable to “communicating vessels”, which are known from school physics lessons. Only instead of water there is air, and as a result - high-quality and natural ventilation of the premises.

More serious ventilation methods are used only on large farms and are not practical when setting up a homemade chicken coop. The reason is the need to purchase expensive fans with high power consumption.

What else should you know?

In addition to everything described above, you should take care of high-quality floor mats and disinfection of premises.

And even if heating equipment is installed in the barn, for the winter you need to additionally insulate the walls, floor, ceiling and window openings.

Litter

Optimal composition for bedding for the winter:

peat - 5 cm;
sawdust - 5 cm;
straw dust - 5 cm;
corn cobs - 3 cm.

A total of 18–20 cm is obtained. It is better to lay out the components in layers. Straw dust and corn cobs can be replaced with hay.

In the warm season, the litter can be laid in a smaller layer (10 cm), combining peat and sawdust.

The litter is completely replaced every 3–5 months. For winter, the litter needs to be completely changed by the end of October. Throughout the cold season, as it gets wet (about once every 7–12 days), the top layer (7–10 cm) is replaced.

Disinfection

The most important measure in maintaining a healthy microclimate inside the chicken coop is disinfection, which includes:

cleaning the premises every 7–10 days with changing the top layer of litter;
complete change of litter every 3–4 months;
washing drinking bowls and feeders every 1–3 days;
sanitary treatment of walls with copper sulfate once every 3 months.

All these procedures are necessary to eliminate pathogenic microbes that spread indoors under the influence of ammonia vapors released from poultry waste products.

Eating stale mash can spread E. coli, so feeders designed for wet food should be cleaned immediately after eating.

Washing utensils for eating and drinking is carried out using non-aggressive detergents. You can use baby soap or baking soda.

Sanitary treatment of walls is carried out with a 3% solution of copper sulfate. During processing, chickens should be taken outside and the room should be well ventilated.

You can put the bird back in after the walls have completely dried. If there have been cases of infection, it is better to burn the walls with gas lamps.

When the bedding is completely changed, the floors are also treated with a solution of copper sulfate. After complete drying, a new litter is laid.

Interior decoration

When raising meat breeds (broilers), the internal arrangement is not as important as for laying hens. Providing daylight, insulation and well-made perches are the key goals of the chicken coop for the latter.

Lighting

Agronomists recommend maintaining normal lighting in the chicken coop for at least 8-10 hours a day. If daylight hours for chickens are provided for 11-12 hours, the number of eggs laid can be increased up to 25-30%.

It is most important to use additional lighting from November to March.

To save on electricity in winter, you need to provide normal windows with shutters that can be closed from the outside.

To illuminate the chicken coop, it is permissible to use various good lamps:

fluorescent (40 W);
electric incandescent lamps (40-60 W);
energy saving (15 W);
LED (various powers, depending on needs).

One 60 W incandescent lamp can illuminate 6 square meters. m chicken coop (when placed at a height of 2 m from the floor). Thus, a good level of illumination (20 lux) is achieved.

Keep warm

The temperature inside the chicken coop should never be below +15 degrees. If this requirement is not met, the chickens will begin to consume twice as much feed, and the ability to lay eggs will drop sharply.

The stated condition applies to all common breeds of chickens. However, some can exist relatively comfortably at lower temperatures (for example, Cochin or Brahma due to their thick, lush plumage).

To maintain adequate temperature in the chicken coop, the following conditions must be met:

main walls with a thickness of at least 15-20 cm (for winter chicken coops);
external wall insulation;
roof insulation;
insulation of floors (concrete) or the use of wooden floors;
take care of the absence of holes, cracks and rat passages;
seal the chicken coop with absolute protection from drafts (for ventilation during the day, you should take care of the opening windows);
have equipment for heating the room during frosts.

To ensure additional insulation, you can follow these recommendations:

Place small ovens in the chicken coop with the chimney vented outside. Far from the safest, but still an effective option.
Heat the room with fan heaters or electric radiators. The latter should be turned on during severe frosts or at night. The rest of the time they should be turned off (saving energy and increasing the service life of devices).
You can also heat it with a stove with a water boiler and a heating element (tubular electric heater). During frosts, the stove is heated with wood. The heated water from the stove is supplied to heating radiators, which are located along the walls of the structure. Additionally, water can be heated by the mentioned heating element (up to 1.5 kW). Thus, during the day the stove runs on wood, and at night the heating element is turned on.
You can also heat the chicken coop using infrared lamps. They emit a soft and not too bright light, which will be comfortable for chickens.

An important condition is to install the lamps so that they are out of reach of birds. A fire in a small and wooden structure is dangerous not only for chickens, but also for people.

Arrangement of perches

The perches are the most important place in the entire chicken coop. The chicken will spend the most time on them. Chickens sleep and rest on roosts, so the quality of these places must be impeccable:

for 1 individual, 25 cm is provided from the entire beam (if there are more than 20 individuals, then the total length of the perches should not be less than 5 m);
perches are installed with a ladder or completely horizontally (but in no case on top of each other: the upper ones will dirty the lower ones);
you should decide on a place in the chicken coop - where it will be easiest to clean up, there should be perches, because the bulk of the droppings will accumulate under them;
the width of the beam should be 3-5 cm;
All edges are processed with a plane to make the chickens comfortable and safe.

Arrangement of nests

The chicken coop must have nests where the chickens will hatch their eggs. Nests can be inexpensive: from an old basin covered with straw. But if you create a chicken coop with your own hands from scratch, then it is important to take care of the nests as responsibly as the entire structure as a whole:

for 4 laying hens, 1 nest is required (at least), that is, for 20 individuals, 5 nests or more are made;
a high threshold is set at the exit from the nest: hens are not the most graceful animals and can easily roll the egg out of the nest;
nests can be installed above perches so that laying hens can get there through them (flying up is not required);
when installing nests separately from perches (at least 40-50 cm from the floor), it is worth taking care of the poles that provide the chickens with a comfortable approach;
lamps must be turned away from the nests - chickens like to lay eggs in a dark and quiet place;
Separate feeders and water should be installed for laying hens hatching eggs near the nests.

If the area of the chicken coop allows, you can install a small ash bath next to the nests. Chickens will use it to clean their feathers and get rid of parasites, which, in turn, will increase their comfort and egg production.

Power supplies

It is better to organize the arrangement of feeders and drinkers around the perimeter of the chicken coop so that there is more space for walking. Using regular bowls is also not advisable.

It would be wiser to make wooden feeders or install a regular pipe with holes through which the chickens will peck food. Drinking bowls can be made from plastic bottles, drainpipes (using the same principle as with feeders), plastic buckets, etc.

If you can come up with many options with feeders, then with drinkers it is more difficult. This video shows a way to make a semi-automatic waterer for chickens from a regular pipe:

Additional heating

A comfortable temperature for chickens is 15 degrees Celsius, in winter – at least 10 degrees. Therefore, artificial heating is mandatory. Electric convectors are most often used. They consume little energy and are not dangerous to operate. Usually two convectors are installed. One runs constantly, the other's timer can be set to run at night.

DIY mobile chicken coop

If you wish, you can make a homemade chicken coop “on wheels”. It has many advantages over the stationary one and only a few disadvantages. The most important of them is the small number of chickens that can be housed there.

The structure created is almost identical to a regular chicken coop, but much smaller in size and without the use of heavy materials:

First, a drawing of a mobile chicken coop is drawn up. If you start creating it right away, you can miss key details, and the structure will collapse at the first load.
Formation of the chicken coop:
connected using hewn boards (with handles for moving the structure);
the side walls are made of slats with a section of 1.3 x 3 cm;
a mesh is stretched between the walls;
the overlap between the tiers can be arranged with plywood (a hole is created in it for the chickens, where the stairs will be connected);
one of the side walls must be removable (entrance to the chicken coop);
the second wall is created from clapboard.
The lower tier is divided. A third of the entire area is equipped for perches, and the rest is space for birds to rest.
Making the roof. It is made from plywood sheets so that at high temperatures the lid can be lifted for ventilation.
A small part of the roof must be completely removable. This will allow you to easily clean the chicken coop if necessary.
Final processing. The outer part of the structure is treated with varnish. Thanks to its use, it will be possible to protect the wood from insects and excess moisture.
Interior decoration. In a mobile chicken coop, the most important thing, in addition to perches and nests, is to organize lighting and ventilation. Access to sunlight can be provided through windows or using lamps, and for ventilation a regular window will do.
All other parts and devices are created completely identical to the previously mentioned scheme.
Base. Due to the constant movement of the structure, there is no need to worry about the foundation; a simple but strong wooden floor will be enough.

Under it, however, you can arrange metal beams and attach wheels. This will eliminate the need to move the structure by hand.

If you take the creation of a chicken coop extremely responsibly and use high-quality materials, then the chickens will feel comfortable, the main thing is to choose the best option. And this will be reflected in good egg production and other advantages.

Copy link

Features of construction

A chicken coop is a building designed for keeping and raising poultry.
The basic requirements for a poultry house are as follows.

The norms assume that 3–4 individuals are present per 1 m² at the same time. Laying hens should move freely around the coop. If there are only two chickens, at least 3 m² is required.
Birds require exercise unless they can move freely around the yard. The dimensions of the compartments are at least 15 m². A canopy is built over part of the walking area so that the birds have somewhere to hide from the rain.
It is better to build a chicken coop on a hill to avoid dampness and leakage.
They construct a utility block from brick, foam concrete, and cinder blocks. However, the best option is wood, as this material retains heat much better. The brick structure needs serious insulation.
Windows are placed on the south side to provide natural light. Windows should open to ventilate the room.
It is imperative to equip the chicken coop with perches and nests for laying hens.

The better equipped the chicken coop, the less often the owner will have to worry about the condition of the chickens.

Photo ideas for exterior decoration

On a plot with pink flower beds and a classic house, a romantic white poultry house looks just right

A chicken coop made of unpainted wood looks natural in the garden

If you paint the facade of the poultry house in contrasting colors, it will look much more attractive

Such a chicken coop will seem appropriate next to a half-timbered house

A summer enclosure for chickens, reminiscent of a bungalow, can be assembled from the remains of the construction of the main house

Getting ready for winter

For those who built a frame poultry house using the described technology, all the walls, floor and ceiling of the chicken coop are reliably insulated. If you doubt that chickens will be able to maintain a room temperature of 12–14 ° C only due to the heat of their bodies, you should help them.

Fermentation winter litter can be strengthened with a special bacterial preparation

To begin, create a warm bedding at the end of autumn by covering the floor with slaked lime, and then with a 7 cm thick layer of a mixture of sawdust, straw and peat. Gradually mixing with manure, it will begin to compost and release heat. In cold weather, the litter will need to be turned up and new mixture added, so it should be prepared in advance. In spring, the litter will be an excellent fertilizer for the beds.

During the winter, it is also worth covering the ventilation holes and ventilating the chicken coop yourself. If the windows in the building are not plastic, their joints should be covered with masking tape or a transparent film should be secured to the window. The hole for laying hens is also insulated in the same way.

Type and characteristics of an infrared lamp for heating a chicken coop

Additionally, in frosty times, instead of lighting lamps, infrared lamps are screwed into the sockets. It is advisable to lengthen the wire so that it can be lowered 1–1.2 m above the floor level. Such lamps provide less light than usual, but for chickens such lighting will be pleasant and comfortable.

If everything is done correctly, you will not need additional measures for insulation and heating of the poultry house.

Video: Tips for preparing your chicken coop for winter

Now you can definitely set up a comfortable chicken coop for 100 birds without extra costs and construction errors. All that remains is to collect the materials and get to work.

Author: Marina Maksimova-Koldashenko
Print

Rate this article:

(10 votes, average: 5 out of 5)

Share with your friends!

Choosing a chicken breed

Laying hens lose productivity after about 1.5 years. In order to ensure the renewal of the livestock, you need to take care of purchasing an incubator.

Using your own incubator to raise your chickens means purchasing chickens of the Egg-laying, Leghorn, Hisex or Loman Brown egg breeds, which lay up to 300 eggs per year. The main advantage: early maturity, high-level egg production. One hen lays one egg per day. For example, breeds of chickens: Kuchinsky, Yubileiny begin to lay eggs at the age of 4 - 5 months. The most popular crosses for running a business selling eggs: Loman Brown and Hisex Brown, they also have an excellent meat yield when slaughtered.

Drawing

Before building a chicken coop, you should draw up a drawing. The construction plan will not allow you to miss a single small detail. And clearly calculate the amount of material required.

On the construction diagram you need to indicate the length, width and height of the future poultry house. Location and number of windows and doors. As well as the zones into which the chicken coop will be divided. For example, determine a separate place for hatching eggs, perches, feeders with drinkers.

It is necessary to indicate where the wiring, ventilation and water supply will go. Where will the lamps for lighting be mounted?

The walking plan should also be on the drawing. It is recommended to build it on the south side. The wall of the building will close the walking area from draft winds.

Purchasing an incubator

Reproduction of poultry requires the use of an incubator. For the most part, this is Russian equipment - the ILB-0.5M incubator for 770 eggs. Chick incubation time is 21-22 days. However, this technique is already for farms that are reaching a more significant high level.

For a small personal farm, for example, the Norma Park incubator for 120 eggs with automatic rotation , hygrometer, humidity control and digital electronics and uninterruptible power supply, switching power to battery power at the time of a power outage is suitable. The incubator, along with chicken eggs, can be used for duck, goose and quail eggs. Price 13,999 rub.

An incubator for 500 eggs can cost up to 40 thousand rubles.

An industrial farm incubator with automated control for 528 eggs of the ECO-528 brand costs 37,500 rubles.