A circular saw is a versatile tool that is often used when cutting wood. Today there are a huge number of such devices. Therefore, before purchasing, you need to carefully study the rating of circular saws for the home and choose the most suitable tool from it.
A circular saw is an indispensable tool for working with wood.
What is a miter saw?
The purpose of the miter saw is already clear from its name - trimming (in other words, transverse cutting) of long parts: trim, baseboards, fillets, moldings, etc. A master unfamiliar with a miter saw will probably be surprised - all of the listed parts can be cut perfectly with a circular saw, and if you need to cut cleanly and at a certain angle, you can use a hacksaw and a miter box. That’s right - it is the hacksaw and miter box that the miter saw is designed to replace, for which it is sometimes called an “electric miter box.”
Anyone who has ever had to connect platbands and baseboards “in a mustache” knows that this task is not as simple as it might seem at first glance. Without proper skill, even with the help of a miter box, making a perfect 45-degree cut is not easy. What if the part is not flat, but has a complex shape? What if it is a wide external frame or a decorative element and it simply does not fit into any miter box? What if the joint angle is not straight and you need to cut not at 45 degrees, but, say, at 57? What if you also need to cut at an angle to the vertical? A hacksaw on a rotary bed won’t help here either.
DIY riving knife
Everyone decides for themselves whether to buy or make a knife for a circular saw. You can even make a riving knife from a strong and hard rivet. The main thing is that it is equal to or slightly greater than the thickness of the teeth on the saw and is located exactly behind it.
But if the wood is hard and has a high density, then a regular knife may not be enough. The workpiece returns to its original position during sawing. There is a clamp behind the knife and scorch marks are guaranteed. The masters do it very simply. This method is simple and does not yet have an analogue in its reliability. A spacer wedge is placed on the harness.
- The wooden beam that has passed the spacer knife must be divided with a wooden wedge. It is simply inserted into the cut of the workpiece.
- After the workpiece has passed the full stroke, you need to fix the position of the wedge.
- use spring material.
- The leash is attached.
- After the block passes, the wedge will remove itself from the cut and remain on the leash.
If the parts are the same, immediately adjust the leash for ease of operation.
Timely inspection of the machine and proper adjustment of the riving knife will eliminate the need to worry about scorch marks and your safety while working. All settings of the machine must be carried out when it is turned off, but they must be carried out. This will save money and time.
The main injuries during work occur due to the return flight of the bar. This can be avoided by following all instructions and using safety precautions. Make sure everything works and all components are in place. Only then start working.
IMPORTANT: You cannot work on a faulty unit, even if only the spacer blade is missing.
Sources:
https://moy-instrument.ru/instrumenty/lift-dlya-tsirkulyarnoj-pily-svoimi-rukami.html https://vseogarage.ru/poleznye-sovety/nozh-rasklinivayushhij.html
What can a miter saw do?
Thanks to these capabilities, the miter saw is very popular among builders, carpenters, decorators, framers, furniture and wooden door assemblers. And in a home craftsman’s workshop, a household miter saw will not be a superfluous tool.
Milling
Discs
Such nozzles are available in various designs. The main difference between the devices is the size of the abrasive grains.
Miter saw device.
The device is not that complicated, but the quality of the cut and the price of the tool depend on the quality and material from which the hinge and frame, clamps and clamps are made. In inexpensive models, these parts may be stamped from sheet metal, have play and distortion, which can lead to inaccurate cuts and noticeable gaps in the joint. Expensive models have parts made of stainless steel and aluminum alloys; the moving parts in them move along clearly defined trajectories, without backlash, wedges or distortions. In addition, expensive models boast additional features and equipment:
Characteristics of miter saws.
Power.
One of the main parameters that determines the maximum diameter of the installed disk and, accordingly, the depth and width of the cut. It makes sense to choose power based on the intended tasks. So, for trimming interior trims and skirting boards, a power of 1000-1400 W will be quite sufficient. If you also plan to trim wide moldings and cut parts at an angle to the vertical (this increases the depth of cut), a power of 1400-1800 W will be optimal. The same power range will be most suitable for a universal tool. And finally, a construction tool will require a maximum disk diameter and a maximum engine power - from 2000 W or more.
All other things being equal, it is better to choose a more powerful model - engine power, of course, has some impact on the price of the miter saw, but not as much as the manufacturer’s reputation and the quality of the parts. The weight that increases with power does not matter much for this tool - it is intended for stationary installation. Therefore, it is better to overpay a little for the power reserve, which - in relation to electric motors - is never superfluous: it is well known that any electric motor will last much longer if it is not used at the power limit.
The higher the maximum disk rotation speed
, the cleaner and better quality (without chips and burrs) the cut will be.
At the same time, some materials cannot be processed at high speeds - for example, plastic and polyurethane foam moldings and baseboards can melt when cutting at high speeds. If you intend to process such materials with a miter saw, you should choose among models with speed control
.
Disc outer diameter
determines the maximum
depth of cut
, and, if the saw does not have a broaching mechanism, then
the width of the cut
. Therefore, the choice of disk diameter should be made according to the required depth and width of the cut. For most interior elements, a cutting depth of 50 mm and a width of 120 mm are sufficient. External trim and decorative elements may require a depth of up to 100 and a width of up to 200 mm.
Tilt angle
and
the angle of rotation
determine the angle of the future miter connection. To connect parts at a certain angle, each should be sawn off at half the angle - 45 degrees for a connection at a right angle, more than 45 for connecting parts at an acute angle and less than 45 for a connection at an obtuse angle.
To prevent jerking when starting the engine, there is a soft start option
– saws equipped with this function, although they will cost more, will last longer by reducing the adverse effects on the engine. And the risk of damaging the part with a sharply moving disk will be less.
You should also pay attention to the gearbox, its presence and type.
Review of the best brands
The main characteristics of most circulars are the same. Therefore, before purchasing, it is worth comparing their parameters.
1. Manufacturers almost always provide a pipe for connecting a dust removal unit. However, an additional built-in dust bag, such as on the GKT 55 GCE, is not common. Meanwhile, it improves the cleanliness of the room.
2. Versatility with power at a relatively low price have brought Makita SP 6000 equipment to a leading position among professionals and home craftsmen.
3. Many tools of this type (DWS520K) are equipped with an anti-splinter insert, which ensures the quality of the operation, both during longitudinal and transverse cuts.
Functions | Model of circular circular saw, submersible type | |||||
Makita SP 6000 | Interskol PP-165/1300EM | Bosch GKT 55 GCE Professional | DeWalt DWS520K | Metabo KSE 68 Plus | ||
Manufacturer country | Great Britain | Russia | Germany | Germany | Germany | |
Construction type | Manual | Manual | Manual | Manual | Manual | |
Power, W | 1300 | 1300 | 1400 | 1300 | 1050 | |
Voltage, V | 220 | 220 | 220 | 220-240 | 230 | |
Rotation speed, rpm | 2000-5000 | 3600-6250 | 1750-4000 | 2000-7300 | ||
Advantages | External access to brushes | Easy disc replacement due to spindle clamping | Rubberized handle | Detachable, replaceable network cable with quick connect; guide rail system | ||
Weight, kg | 4,1 | 4,5 | 4,7 | 5,1 | 4,4 | |
Cutting depth, mm | 45° | 40 | 38 | 42 | 44 | 43 |
90° | 56 | 55 | 57 | 59 | 55 | |
Electronics | Stabilization system, speed control, overload protection. | Motor protection, speed regulation. | Speed adjustment. | Cutting unit position indicator. | Motor overload protection. | |
Disc diameter, mm | 165x20 | 165x20 | 165x20 | 165x20 | 160x20 | |
Seat, mm | 20 | 20 | 20 | 20 | 20 | |
Packaged size (LxWxH), mm | 420x290x270 | 341x258x245 | 310x * x240 | 441x318x306 | ||
Protective insulation | Double | |||||
Smooth start | + | + | + | No | + | |
Electric engine brake | + | + | + | |||
Connection pipe for connecting the dust removal system. | + | + | + (built-in dust bag) | + | + | |
Sound pressure, dB | Torsion dampers | 97 | 92 | 92 | 89 | |
Tilt adjustment, degree | Stepless 1-48. | 1-47 | 1-47 | 0-47 | 1-47 | |
Additional | Second handle; durable casing | Long network cable | Sawing metal | Allowed to work with plexiglass, reinforced plastics | Metal cutting | |
Price, rubles | 17990-19990 | 7395-8380 | 29509 | 27089 | 30723 |
4. The ability to perform operations at low or high speeds of the plunge-cut saw allows you to work with material of any hardness from wood to metal.
A review of tools from different manufacturers shows that the more options there are for the professional use of a circular saw in industrial production, the higher its cost. Products from domestic manufacturers are not much inferior to their foreign counterparts, but the price range is several times lower.
Related Posts
Top 8 miter saws for wood equipped with a broach mechanism. Which miter saw is best for installing doors?
Contents: Miter saw: device, purpose and abilities Electronic miter saw: aspects and aspects of selection Miter saw blades: what is the difference between them
Cutting finishing materials at an angle is, frankly speaking, a difficult task, and virtually all people have problems solving it. But by and large, most finishing materials require this approach to their own installation, for example, lining, skirting boards, baguettes and, in addition, metal structures assembled from profile pipes. Well, there are a lot of such materials, and cutting them diagonally has to be done, even with very high precision. Next, together with the website stroisovety.org, we will study a tool such as a miter saw, which allows you to cope with the task of diagonal trimming. We will get acquainted with the design of this tool, evaluation aspects, which will allow you to purchase a model that is suitable for the job, and we will understand the saw blades used at the same time as equipment.
Electronic miter saw photo
A hand-held miter saw has a narrow purpose, and you are unlikely to be able to cut boards with it. Her tasks are little different - she can only make short cuts. With its help, you can cut a board in half, straighten its end, or cut the end of the board at a certain angle. About the principle, and everything else that it can do, however, believe me, this is a lot - other sawing equipment copes with such tasks much worse. Oh, sell, I completely forgot that, in addition to the type of wood, depending on the equipment used, the miter saw works with soft metals, plastic and, as needed, with thin-sheet iron, or rather with a profile made using it.
Read also: Choosing a metal lathe for your home
Miter Saw Abilities
The universal miter saw has a rather complex design - it consists of two main units, which are in no way distinguished by their simplicity of design. This is a bed with a rotary table and a movable cutting head with a massive electronic engine attached here.
- Stand with rotary table. You, these two parts have no basis for doing without each other. On the bed itself there is a guide that ensures a fixed position of the workpiece. The entire miter saw table can be rotated relative to the guide by 90˚ (45˚ one way and 45˚ the other way), thus providing a simple trim of the workpiece in each direction without reinstalling the part.
- Cutting head. It is installed specifically on a turntable - it changes its professional position together with the child. For convenience when working, a graduated scale is applied to the side of the rotary table on the bed - by combining the table mark with a certain degree value, cuts are made at any angle. This is not all - the head itself, or rather its cutting part, can tilt to the left and to the right, thereby providing an oblique cut. In most cases, the tilt is performed in one or two fixed positions (30˚ and 45˚ in either direction). Also, some models are equipped with a special broaching mechanism. A miter saw with a broach allows you to cut workpieces much wider than its regular counterpart.
What design does a miter saw have?
The question of how to choose a miter saw is best done by adhering to 5 small rules.
- First you need to decide on its purpose and operating criteria. Why do you need it? What kind of work, in what quantity, do you intend to create with its help? If you are purchasing a miter saw for use at home and do not even plan to do complex operations, you can get by with ordinary equipment with a basic set of additional functions. In this case, we are talking about the professional use of a miter saw and its everyday use, then you need to choose an expanded version of this tool with a full set of additional capabilities. You will be able to consider the option of purchasing a so-called combined miter saw, which is equipped with an additional work table at the top of the cutting head, allowing it to be used as a stationary circular saw.
Miter saw for wood photo
- The second thing you need to find out is the size of the disks used. What is important is not so much the diameter of the equipment being installed, on which the depth of cut depends in all respects, but also its thickness, which affects the type of material processed by the miter saw. A good option for household use is a machine designed for a disk with a diameter of 200 mm. For professional use, it is better to get a machine with disks with a diameter of 250 mm.
- Work safety. This popular rumor, a tool without appropriate protection becomes a very unsafe assistant - be sure to carefully examine the presence of protective covers that are designed to completely cover the disk even during cutting and protection devices against accidental activation.
- Weight and dimensions of the tool. Essentially, a miter saw is a portable device - you don't want it to be very heavy. Today, since we are talking about ease of work, carefully examine the ease of movement of all its parts - pay special attention to the cutting head. A very tight motion of this part of the tool will quickly tire the miter saw operator.
- And the last thing is ergonomics; the tool is expected to be comfortable to use.
- It is necessary to find out the size of the tooth - the larger it is, the rougher the cut will be. It is unlikely that a disk with a large tooth will be able to cleanly cut laminated, varnished or painted workpieces - for this purpose it is necessary to obtain a disk with a small tooth. Also, the small tooth showed excellent performance when working with the duralumin profile. In general, saw blades for miter saws are divided into three types: for longitudinal cuts, for transverse cuts, and also for finishing cuts, which, you know, are universal.
- If we are talking about mass production or working with thick workpieces, it is necessary to study the presence of thin slots on the disk - by and large, these are temperature compensators whose task is to maintain the measured size of the disk when it is heated. Today, such discs are the least noisy.
How to choose a miter saw
When choosing a miter saw, it will be useful to take into account both the power of this tool and, of course, the rotation speed of the disc. For the most part, these values are calculated by the manufacturer and are good. A household tool will have lower power than a professional one, but the rotation speed of the disc is almost always the same, which is determined by the need to make a clean and even cut.
Universal miter saw photo
There are not so many differences between the discs used on a miter saw, and the main ones are the seat and outer diameter, as well as the geometry of the cutting tooth. If what remains to be done with the size of the disks is to a certain extent clear to our client (you will prefer either a 25mm or 30mm mounting hole, and their outer diameter is 210, 250 and 305mm), then the geometry of the tooth should be understood in more detail.
Miter saw blade photo
And in conclusion, a few words about enterprises that create miter saws for wood. The favorites in the production of virtually all electronic tools are Bosch and Makita, and their miter saws are no exception. Practical tools from Metabo, Hitachi, and DeWalt also performed well. If we talk about Russian miter saws, then we’ll mention Corvette tools. So, there is plenty to choose from - the main thing is not to miscalculate your abilities.
Bosch hand miter saw photo
About the principle, and everything else that you should know about a tool such as a miter saw. Buy it, use it, don’t forget that this tool is quite scary - don’t forget about safety precautions and always be as collected and sober as possible while working!
Read also: Metabo pumping station hww 4500 25 inox
Author of the article Alexander Kulikov
A brand new door is sold without fittings. It is not difficult to install the sash into the frame, install hinges, handles, and a lock if you have the tools. Additionally, devices that help wedge the canvas in the frame, as well as additional consumables for finishing, will be useful. It is better to get a branded tool for installing an interior door, because the quality of the work performed depends on it.
First, before installation, they inspect the household tools that are available. Check its performance. A power tool lying around idle could become unusable due to exposure to dampness and dust. After checking the functionality, a list of suitable purchases is made.
Preference is given to high-quality power tools. You shouldn’t overpay for professional-class units, and it’s better to avoid cheap Chinese counterfeits. It’s normal to purchase a semi-professional branded tool. In the future, you will need it more than once at home.
When performing complex work related to dismantling an old door frame, widening an opening, cutting grooves for fittings, you need a power tool. It will not only speed up the process, but will help to get the job done perfectly. Based on your intended goals, you need the following tool to install the door:
- A miter saw will be needed during the installation of a homemade sash. With its help, you can simply make longitudinal cuts, cut elements of the door frame, reduce the size of the sash, and adjust trims and trims. A miter saw can partially replace a jigsaw.
- A hammer drill is needed when dismantling an old door frame. The introduction of different sizes of chisels and drills helps to quickly make holes for anchors and break off part of the wall when expanding the opening.
- Use an electric drill to drill holes for screws, a door handle, and select a groove for the lock if there is no router nearby. It’s important to immediately think about what drills are needed to install an interior door.
- A screwdriver with a set of attachments is not an essential power tool if you intend to install only one door. Of course, tighten a dozen screws with a screwdriver.
- A jigsaw is indispensable in the process of installing extensions and platbands. Using a set of nail files, you can quickly make even cuts when fitting planks made of wood, aluminum, plastic, and MDF.
After installing the doors, the owner will not have the power tool lying around idle. You will need it when hanging shelves, cutting wooden pieces and other household work.
You can't do it without hand tools to install doors. Even if there are electronic units nearby, it is impossible to dismantle the box without a mount or hammer in a nail without a hammer. For installing doors you will need:
- Marking pencil. It is better to use a soft rod so that when pressed it does not leave dents on the varnished surface. Of course, take a marker, unfortunately it is difficult to erase after incorrect markings.
- A chisel is one of the main tools for installing doors between rooms, helping to select recesses for fittings.
- A hammer is needed to drive nails, dowels, cut out indentations with a chisel, and destroy the wall when expanding the opening.
- A plumb line and level will help ensure that the door is installed smoothly. If the box is skewed, the sash will sag. A laser level, or bubble level, 50 cm long is suitable.
- A hand hacksaw for wood replaces a jigsaw or a circular saw. But you won’t be able to saw a piece of wood lengthwise. A hacksaw will help to shorten the elements of the box, adjust the length of the trims and extensions.
- A crowbar will make it easier to dismantle the old boat. It is more convenient to use a pry bar from a car mechanic's kit.
- A mounting gun is needed when filling the gaps between the ends of the walls and the door frame with foam. You can benefit from using a tool if you take cylinders with a tube attachment for manually squeezing out foam.
- A set of screwdrivers replaces a screwdriver. It is comfortable to use the handle with interchangeable attachments of various shapes.
- The miter box helps to make the correct cut at the required angle of the parts of the box and platbands.
A good miter saw is designed for straight or cross-cutting of various materials at a specific angle. Among the main criteria characterizing the model are the absence of error and stable operation of the electric motor.
To choose the right miter saw, it is not enough to determine the range of tasks ahead; it is important to purchase a high-quality model that will ensure maximum accuracy. The rating of the best miter saws in terms of quality and reliability will introduce you to a selection of modern models that meet all the basic requirements of carpentry and carpentry.
Preparing the guide rail
First, let's figure out what elements the guide rail has and why they are needed.
Anti-chip protection or anti-splinter tape. Protects the workpiece from chipping, which most often occurs when sawing laminated chipboard. This is the most wearing part of the guide rail and must be replaced regularly.
- The sliding band (anti-friction) reduces friction between the plunge-cut saw and the guide bar, allowing the saw to glide easily along the guide bar.
- Anti-slip tape is necessary to create increased friction between the guide tire and the workpiece, due to which the guide tire is securely held on the workpiece during processing. For even more reliable fixation of the guide rail on the workpiece, clamps are used.
- Auxiliary grooves are used for attaching additional equipment and for connecting guide rails to each other.
For comfortable work, the length of the guide rail must be greater than the length of the workpiece, at least 400 mm (250 mm before the workpiece and 150 mm after the workpiece). In this case, it is possible, if necessary, to completely immerse the saw without cutting into the workpiece at the beginning and finish sawing the workpiece at the end, while the saw will be guaranteed to be with its entire supporting surface on the guide rail, and the workpiece will be sawn.
Standard guide rail lengths are 800 mm, 1080 mm, 1400 mm, 1900 mm, 2400 mm, 2700 mm, 3000 mm and 5000 mm. Non-standard lengths can be cut from a longer standard guide rail. For example, to work with sheet acrylic stone having a standard size of 3600x600 mm, it is recommended to cut a guide rail 5000 mm long into two parts 4000 mm and 1000 mm. In this case, the long part (4000 mm) is used to cut the sheet lengthwise, and the short part (1000 mm) is used to cut the sheet crosswise.
It is possible to join the guide rails using two connecting plates. An important difference between FESTOOL guide rails and most competitors is the presence of two grooves for simultaneous use of a pair of connectors. Splicing the guide rails using a pair of connectors produces a much more stable bending connection. This advantage is especially evident when milling with a vertical router along a guide rail, when a force perpendicular to the guide rail arises, tending to move this rail and rotate (displace) the junction of the guide rails.
Before you start working correctly, the plunge-cut saw needs to be, as the Germans say, “married” to the guide rail, or, more simply, to cut the anti-splinter tape. For this purpose, the saw is mounted on a guide rail and positioned using two eccentric clamps. By rotating them clockwise and in the opposite direction, it is necessary to find a compromise between the absence of lateral play of the saw on the guide rail and the ease of longitudinal movement of the saw along the guide rail. After the backlash is selected and absent, and the saw slides along the guide rail without excessive force, it is necessary to file the anti-splinter tape (chip protection). The manufacturer recommends placing the guide rail on any suitable base and sawing off the anti-splinter tape (chip protection) with the saw immersed as much as possible. Now the bottom edge of the splinter guard always aligns with the cutting edge of the saw, not only in square cuts, but also in all other angle settings.
BISON ZPT-210-1400 L
When you need to buy a good trimmer for your home, this model will definitely be the first on the list of contenders. A small-sized household-grade desktop unit is designed for working with wood workpieces with a thickness of no more than 60 mm. This is a good, budget saw without broaching, equipped with a laser marker, clamps for fixing workpieces and a 210 mm saw blade. The calibrated design of the crosscut allows you to set the sawing angle without error and achieve an accurate cut. Ease of operation is achieved due to easy setup of the unit, and high-quality cutting is achieved due to good power and high speed. A crosscut machine will be an excellent solution when purchasing tools for woodworking in the country, as well as for building various utility structures on a personal plot. With decent workmanship and affordable price, it is difficult to detect objective shortcomings in this popular saw.
Advantages:
- optimal combination of power and speed
- reliable, time-tested design
- laser marking
- Possibility of connecting to a vacuum cleaner
- compact dimensions
- presence of shaft lock
Flaws:
- it is not possible to adjust the angle position with clamps
Features of longitudinal sawing of wood
The longitudinal cut goes along the fibers. Compared to a cross cut, the machine heats up faster and more energy is wasted. But there is a plus: after finishing work on lumber, the surface remains smooth. When cross-cut, it is rough and chipped. The longitudinal sawing method is similar to splitting a log with an ax with a wedge blade. Both processes break down fibers. The cutting disc removes the lignin and its movement cuts the wood.
This method is used in sawmills. Bars, boards and beams are obtained by longitudinal sawing. Boards are made after processing the wood along several parallel planes. Bars are longitudinally sawn boards. The width of the beam is less than or equal to double thickness.
At the initial stage, when there is only a log, processing takes place on the head machine. It can rotate workpieces while cutting. This reduces waste. After finishing the work, the lumber is sorted. The next step is to cut the finished material into blanks and transport them to drying chambers.
After this work, sawdust remains in the form of a cube up to 7 mm. They can absorb more moisture or binder, since this characteristic is higher for fibers along than across.
IMPORTANT: Longitudinal sawing of wood is carried out with a margin to release internal stress. This will help in the future to get rid of flaws when planing and sawing.
During sawing, internal tension appears in the lumber. It occurs due to dry and wet fibers that are compressed or, on the contrary, stretched. And now there is a problem during longitudinal cutting. The edges of sawn boards will most likely close together. This issue can be closed. Do not cut materials with cracks or wood that has not been properly dried. To protect yourself while working, use a riving knife.
Interskol PTK-216/1100
A universal miter saw for home use or work in a small workshop has collected a lot of positive reviews. The 2-in-1 unit combines both a miter saw and a circular saw, and with a little skill its potential can be increased to a miter box and miter saw. Despite the average power of 1.1 kW, at 5000 rpm the blade does not get stuck in hard wood and provides a clean, precise cut. The removal of dust and shavings is well designed; a vacuum cleaner can be connected to the tool, which is very useful when sawing in a confined space or apartment. When choosing a reliable miter saw at an affordable price, the model from Interskol will be one of the best options in the rating.
Advantages:
- good build quality and reliable electric motor
- wide production capabilities
- precise and clean cuts
- solid platform
Flaws:
- uninformative instructions
- the equipment varies depending on the series (discs with 40 or 24 teeth)
Additional features
When working with wood, it is often necessary to cut the workpiece lengthwise. Some circular saws and miter saws are better suited for this than others. It would be wrong not to talk about these differences.
The design of some models of circular saws allows them to be mounted on a work table or workbench with the blade facing up. The protective cover of the disk is retracted and fixed. It looks like a stationary saw. The operator holds the wooden piece in his hands and feeds it onto the rotating disk. Sometimes it is more convenient to work this way than to move the saw around the part.
Makita LS1040
This powerful model from Makita is one of the best inexpensive broachless miter saws in its class. The professional tool is well assembled, features a reliable, rigid design, cast and durable platform. When the stopper is unlocked, you can set any arbitrary angle; a tilt to the left up to 45° is provided. The maximum width of the workpiece is 125 mm; for the convenience of sawing tall products, there is a special vertical stop that provides additional rigidity of fixation. Also included are two side extensions for installing long elements. With a power of 1.6 kW, a saw blade with a diameter of 225 – 260 mm can be installed on a power tool; the standard fit size of 30 mm will allow you to select equipment from other brands. The miter saw is suitable for installing doors or cornices, on-site installation work, and various carpentry works in the home workshop.
Read also: How to make a wooden tool box
Advantages:
- good saw removal system
- reliable and robust design
- quick access to carbon brushes
- dynamic disc brake
- minimum error
- smooth start and stable operation
Flaws:
- The removable workpiece stop can only be used for straight sawing
- Achieving absolute cutting accuracy will require some skill
DeWALT DW713
A reliable and high-quality miter saw is intended for construction workshops or field installation work. According to user reviews, this model has good characteristics: clear settings; no need for regular adjustment (fine-tuning of the mechanism); precision of work, even when sawing a wooden workpiece on both sides, defects are excluded. The DeWalt miter saw is very easy to use and is suitable for users with any experience in carpentry. All angle adjustments are carried out simply and easily; the adjustment mechanics are not overloaded with various elements, which will shorten the process of setting up the unit. According to owner reviews, this model is suitable for cutting lining, various wooden pieces, including baseboards, as well as for cutting plastic and aluminum.
Advantages:
- exact factory settings
- rigid and durable table, complete absence of play
- high power (1.6 kW)
- stamped degree markings
- reliable engine
- it is possible to adjust the stop
Flaws:
- the absence of a soft start requires reliable fixation of the workpiece
- no vertical markings provided
Sanding wood
If you decipher the abbreviation angle grinder, it is clear that finishing is the main purpose of the “grinder”.
Cord brushes
They are used primarily for primary (rough) sanding of wood, when it is necessary to smooth out the unevenness of the sample.
End discs
The name speaks for itself. These attachments are used to process the end parts of wooden blanks (cuts). They are especially effective if you have to deal with corner (oblique) cuts.
JET JSMS-10L
This is perhaps the best miter saw model in terms of price-quality ratio in the rating. The powerful unit is designed for home workshops or private construction. For a very affordable price, the user receives a reliable saw with a broach, a laser guide, adjustable cutting depth and other useful functions. Decent technical characteristics will allow you to use the miter saw for cutting wooden blanks and plastic products. A convenient end stop greatly simplifies the production of series of similar parts. A well-thought-out design makes it possible to perform bevel operations and grooving.
Advantages:
- good functionality
- Lightweight and durable aluminum alloy platform
- The tool is suitable for working with wide workpieces
- high build quality
- ease of use
- excellent equipment
Flaws:
- the laser is sensitive to voltage changes
- The included saw blade is intended for rough work only
- impressive weight – 18 kg
Trimming from various scrap metals
The cutting frame is made of metal
This is a fairly heavy crosscut on a stationary metal table. It will take some effort to control it. But in the end, the saw mechanism moves smoothly, without jerking, and trimming with your own hands is easy.
Specifications:
- electric motor power - 2.2 kW;
- disk revolutions - 2800;
- cutting depth 80 mm.
Materials and tools required for assembly:
- 900 W electric motor;
- a metal sheet;
- metal corner;
- channel;
- hinge group;
- powerful spring;
- Bulgarian;
- welding machine;
- file.
The bed is made from adjustable supports, a metal corner and posts from an old bed. The working surface is a metal sheet like a table surface, in which we cut a hole, and process the edges with our own hands using a file.
- The pendulum stand for the saw is welded from a channel mounted on a sheet of metal; its height is about 80 cm.
- The stand for the electric motor is made in the form of a movable metal plate mounted on hinges. When installing an electric motor, a spring is used as a stabilizer. Then you can do without a pendulum and belts.
- The tension belts are adjusted with a conventional hinged bolt, and the pendulum for the mechanism is also made of metal.
- As an operating tool, a disk with a diameter of 420 mm is installed on the trimmer.
Metabo KGS 305
The miter saw with broach from the famous German manufacturer Metabo is equipped with a powerful 2.0 kW electric motor, a high-quality support platform, broach and convenient adjustment levers. Good performance is ensured by a large diameter disc - 305 mm, permissible cutting parameters 12/32 cm (height/width). The design is simple and familiar, the maximum angle of inclination of the working body is 47, the angle of rotation is 60. The owners note that the power and speed are sufficient for cutting 100/100 mm wooden beams; the unit demonstrates high quality and clean cutting even on soft wood. The miter saw is suitable for a variety of carpentry work; a wide range of tasks can be used in private construction. Many people wonder which company to choose a miter saw from, but Metabo’s positive reputation serves as a first-class guarantor of reliability.
Advantages:
- power and high performance
- convenient settings and controls
- good fixation of the saw blade without play
- well-thought-out safe operation system
- excellent functionality
Flaws:
Bosch PCM 8S
A good professional miter saw from Bosch with excellent ergonomics and very detailed instructions, which will please the inexperienced owner. The broach saw cuts both narrow and wide workpieces cleanly and accurately. The average power of an electric motor of 1.2 kW is enough to perform a wide variety of tasks. The unit requires virtually no adjustment; all factory settings are accurate and do not change even after transportation. A laser marker marks the sawing line, which is very convenient for precision work. The assembly is solid: the platform and saw blade do not have even minimal play, all parts are clearly connected to each other. The small-sized tool will cope with straight and longitudinal cuts in wood of varying hardness, withstand light overloads, and will not fail during intensive use.
Advantages:
- connection to a vacuum cleaner is provided
- excellent workmanship
- precise tilt/rotate settings
- high speed ensures clean cuts in any material
- ease of use
Flaws:
- laser marker is visible only indoors
What are they?
Submersible models are classified according to several criteria, the main one of which is the method of powering the device. According to this criterion, devices are divided into two types: mains-powered and battery-powered. Networked models operate from an electrical power source and have higher power and performance. The advantages of such models include the absence of the need for regular battery charging and low weight. The disadvantages include the inability to use the tool in the field, as well as in any other places where there is no electricity or access to an outlet is difficult. The rotation speed in network models varies between 4-5 thousand rpm, and the average power is about 2 kW.
Makita LS1216
When purchasing a powerful, durable and multifunctional miter saw, you can safely opt for this model from the Japanese manufacturer Makita. A professional miter cutter perfectly cuts metal, plastic and wood, when installing the appropriate saw blade. The cutting height/width is 107/363 mm, which significantly expands the range of available work. Users call this saw “a tool without flaws” and there are many reasons for this: with impeccable build quality and all working elements, the miter has the highest precision in setting angles. The model is also equipped with a soft start system, which is very appropriate for a powerful 1.65 kW engine. This is undoubtedly the best miter saw model in its class; the tool will cope not only with carpentry, but also with precision carpentry work - with the production of stairs, the production of decorative trim for doors.
Advantages:
- easy setting of arbitrary sawing angle
- long draw
- high power
- starting current limitation
- long service life
- the presence of double guides increases accuracy and rigidity
- small dimensions
Flaws:
- The only downside is the weight (26 kg), but given its characteristics this is justified
Our brief review shows the features of popular models for amateurs and professionals, and will help you choose the best miter saw. A decent quality tool is easy to maintain and operate, and even an inexperienced beginner can master the principle of its operation. Saws from the best miter manufacturers combine high quality assembly and a wide range of available jobs. When choosing a reliable miter saw for home or work, we recommend paying attention to the products of the following miter saw manufacturers: Makita, Metabo, Interskol, Zubr, Jet. All models considered in the rating showed high quality in work and functionality.
How does the TS 55 REBQ differ from the TS 55 RQ?
Along with the TS 55 REBQ version, many consumers nevertheless demand the TS 55 RQ model, which lacks electronics and, accordingly, a saw blade brake. In addition to lower cost, the saw has an increased idle speed of up to 6500 and lower power consumption, which in some cases can be decisive when choosing.
Feature/Model | TS 55 RQ | TS 55 REBQ |
Power, W | 1.050 | 1.200 |
Speed, rpm | 6.500 | 2.000 — 5.200 |
Weight, kg | 4,4 | 4,5 |