TOP 15 best miter saws with broaching: 2021 rating by price/quality and which budget professional model to choose for your home

Trimming long parts is almost impossible without a miter saw. For carpentry workshops, such a tool is indispensable, but it will also be a good help in home repairs and improvement.

How to choose the right device? To help in this matter, we have compiled a ranking of the best end caps for you.

The selection of models was carried out taking into account performance, reliability, and adequacy of the pricing policy.

Consumer reviews and expert opinions were taken into account.

Only the best models are presented here in terms of price/quality ratio.

Rating of the TOP 15 best miter saws with broaching 2020-2021

Metabo KGS 254 Plus

at a price of 44,690 rub.

Metabo KGS 254 Plus tool from a German manufacturer, with great power.
Includes a function for adjusting the number of revolutions, allowing you to work with parts made of different materials. In addition, the saw is equipped with a cutting depth adjustment function for processing workpieces of complex shapes. Smooth start and the function of maintaining speed under load ensures maximum precision in cutting parts. The tool is ergonomic and easy to use; all parameters for processing workpieces are set using simple, intuitive adjustments for the user. Main technical characteristics of Metabo KGS 254 Plus

Watch a video with a brief overview of the tool’s features:

How to choose a miter saw with broach?

When choosing a saw, you should pay attention to the following:

• broach width - the larger it is, the wider the workpiece becomes “over the shoulder” of the device;
• cutting depth – determines the thickness of the workpiece;
• rotating design - in most models the angle ranges from 45 to 57 degrees, but there are options with larger angles, mostly professional ones;
• quality of the sole - stamped ones become loose over time, it is better to give preference to cast ones;
• emphasis - the higher it is, the easier it is to work;
• The width of the groove for the disc - the quality of the work depends on this parameter. With a width of up to 1 cm, there will be fewer chips and sawdust on the cut.

A circular saw

Choosing the best circular saw in our review.

Also called a circular saw, this saw is equipped with a serrated or abrasive blade that allows you to cut various materials using a rotating motion, moving around an axis.

What is a circular saw used for? A circular saw is commonly used in a variety of woodworking projects. However, cutting tasks depend greatly on the type of blade that is mounted on the circular saw. This saw can be produced for both left and right hands. During operation, the circular saw relies heavily on the part of the structure in which the engine is located.

Pros Circular saws are very compact in size, making them easy to move. Typically, you take the circular saw to the workpiece, and conversely, with miter saws, you take the material to where the saw is already installed. These saws are capable of making long rip cuts. Cons This type of saw is much more difficult to use than a miter saw. A circular saw requires more skill and requires a lot of experience to use it. From a safety standpoint, a miter saw is a better choice than a circular saw.

TOP 5 best miter saws with broaching by price, quality and reliability for 2021

Metabo KGS 216 M

The classic miter saw is suitable for both beginners and amateurs, as well as for professional use..

High precision of work is ensured not only by the bright LED backlight and laser pointer, but also by the size of the cut, a large number of settings and ease of use.

The ergonomics of the tool are added to the design features, thanks to which all controls are in the operator’s field of vision.

The tool is equipped with retractable extensions, a collector for dust and shavings, and the ability to connect a vacuum cleaner for a cleaner workplace.

The disadvantages users point out are the tight angle rotation mechanism and the small volume of the included dust bag.

Specifications:

• Design type: tabletop;
• Cutting height/width: 65/305 mm;
• Disc/bore diameter: 216/30 mm;
• Tilt/rotate angle: 47/47 degrees;
• Cutting speed: 57 m/s.

pros

• laser marker;
• backlight;
• long warranty;
• equipment;
• build quality.

Minuses

• noisy;
• small bag for shavings.

Metabo KGS 254 M

Powerful tool designed for household construction and carpentry work.

Equipped with a sufficient number of functions, which brings the saw closer to the semi-professional category.

The strength and reliability of the design is achieved due to the aluminum body, high-quality assembly and components . Despite the fact that saws are produced in China, quality checks are carried out in accordance with European standards.

High operating speed is achieved by the number of revolutions and engine power.

The ergonomics of the device is guaranteed by a bright laser pointer, LED illumination of the working area and general design characteristics.

There is a spindle lock for safe maintenance. A powerful dust collector with the ability to connect a vacuum cleaner will help keep the workplace clean.

Specifications:

• Design type: tabletop;
• Cutting height/width: 92/305 mm;
• Disc/bore diameter: 254/30 mm;
• Tilt/rotate angle: 47/47 degrees;
• Cutting speed: 60 m/s.

pros

• laser pointer;
• equipment;
• power;
• cutting depth adjustment.

Minuses

• high price.

BOSCH GCM 800 SJ

One of the best saws in terms of price range and performance . Saw

household grade has wide functionality and can be used even in small carpentry workshops.

The advantage of the model is the design - the drive is equipped with double electrical insulation, allowing operation in rooms and conditions with high humidity.

Saw blades can be easily changed without much time.

The saw copes well with both hard and tough wood at different angles.

It is also equipped with a dust removal system, but users note its imperfection - dust and chips fly past and pollute the workspace.

Specifications:

• Design type: tabletop;
• Cutting height/width: 70/270 mm;
• Disc/bore diameter: 216/30 mm;
• Tilt/rotate angle: 45/47 degrees;
• Cutting speed: 57 m/s.

pros

• double electrical insulation;
• performance.

Minuses

• poor equipment;
• imperfect removal of work debris.

BOSCH GCM 8 SJL

Semi-professional tools from a well-known German manufacturer are designed for processing parts with a small cross-section.

The saw is capable of working not only with wood, but also with metal and a variety of plastics.

The small diameter of the saw blade does not interfere with the speed and functionality of the tool.

Additional options that provide ease of use include a cutting depth limiter, work table extenders and a two-point dust removal system, which allows you to keep the work area clean and not be distracted by sweeping away chips and dust.

Specifications:

• Design type: tabletop;
• Cutting height/width: 70/312 mm;
• Disc/bore diameter: 216/30 mm;
• Tilt/rotate angle: 47/60 degrees;
• Cutting speed: 62 m/s.

pros

• laser marker;
• groove cutting depth limiter;
• two-point removal of chips and dust;
• clamp for fixing the workpiece.

Minuses

• meager equipment.

Metabo KGS 305 M

A universal miter saw has high power and speed of operation, as well as a wide range of different functions, due to which it is classified as a semi-professional tool.

The wear-resistant saw blade does not require sharpening for a long time and is capable of working with various types of wood, plastic, and metal.

It can work both in stationary and manual mode, which sets the saw apart from other options.

Non-standard workpieces can be fixed using special clamps, and stability is increased by special side stops.

Ergonomics are represented by a bright laser marker, LED illumination of the working area, and a soft start system. The built-in dust collector is designed to accommodate a large volume of debris, and when a vacuum cleaner is connected, the ingress of debris onto the work surface is virtually eliminated.

Specifications:

• Design type: tabletop;
• Cutting height/width: 105/305 mm;
• Disc/bore diameter: 305/30 mm;
• Tilt/rotate angle: 47/47 degrees;
• Cutting speed: 60 m/s.

pros

• smooth start;
• backlight and laser pointer;
• side stops and clamps;
• stop for transverse and longitudinal grooves.

Minuses

• high noise level.

Power and number of revolutions

The power of miter saws can vary depending on the model from 800 to 2500 watts. The golden mean is considered to be 1600–1800 W - tools of this power are most in demand today, because they do their job equally well both in home workshops and in small production.

What does knowing the value of such a parameter as power consumption give us? Firstly, the correct correlation between the power of the miter saw and the structure of the material being processed will avoid overloading the tool, which prolongs its active operation time.

Secondly, the greater the power of the saw, the larger the diameter of the disk that can be installed on it. As an example to support this statement, let's compare two miter saws from Bosch. For the PCM 7 model, whose power is 1100 W, you should select a disk with a diameter of no more than 190 mm. But for the GCM 10 J Professional with a power of 2000 W, a disk with a diameter of 254 mm is suitable. It should be borne in mind that as the power of the saw and the outer diameter of its disk increase, the dimensions and weight of the tool increase. So, the first of the models given as an example weighs 9 kg, and the second is already 14.5 kg.

Another technical characteristic that you should pay attention to when choosing a miter saw is the number of revolutions of the saw blade. The value of this parameter lies in the range from 3200 to 6000 rpm. A clean and high-quality cut (without chipping the coating, splitting off wood fibers, etc.) is only possible when working at high speeds.

So, for example, with a saw blade diameter of 260 mm, its angular speed must be at least 2800 rpm. In expensive professional models, the angular speed, as a rule, is not lower than 4000-5000 rpm. even with large disc diameters. A number of manufacturers offer miter saws, the number of revolutions of which can be adjusted depending on the type of work being performed at the moment.

TOP 5 best inexpensive miter saws with broaching

BISON ZPT-255-1800 PL

A Russian-made miter saw that allows you to work not only with wood, but also with aluminum and plastic.

It has the functions of a circular saw and allows you to cut workpieces to length, for which it is equipped with a special work table located at a different level compared to the miter table.

The broach allows you to trim various workpieces with a width of more than 30 cm.

The speed of operation is achieved by power and a large number of revolutions.

The dust removal function is present, however, during operations, chips fly onto the guides; they must be removed regularly, which slows down the work.

Specifications:

• Design type: tabletop;
• Cutting height/width: 90/305 mm;
• Disc/bore diameter: 255/30 mm;
• Tilt/rotate angle: 45/47 degrees;
• Cutting speed: 55 m/s.

pros

• laser pointer;
• extension of the table in both directions;
• power;
• functions of a circular saw.

Minuses

• during operation, chips fly onto the guides;
• weak light from the laser pointer.

BLACK+DECKER BES700-QS

Classic table saw for household use . A special feature of the model is

the absence of a laser marker and the location of the backlight - it is such that it sets the cutting direction with the shadow of the disk itself.

This is partly a plus and a minus - the laser guide can go astray, while the natural shadow cannot be knocked down.

All modern functions are present - tilt angles, adjustment of cutting depth.

All supporting elements are made of cast parts, which ensures high reliability of the device.

Specifications:

• Design type: tabletop;
• Cutting height: 62 mm;
• Disc diameter: 216 mm;
• Tilt angle: 45 degrees;
• Cutting speed: 50 m/s.

pros

• the direction of the cut is set by the shadow;
• functionality;
• The disk is easy to replace.

Minuses

• no laser marker.

CALIBER PTE-1900/255PRm

An excellent tool for carpentry work . Equipped with a powerful commutator motor,

providing high rotation speed.

A laser marker and fold limiter increase the accuracy of work with workpieces.

A special feature of the model is that the saw can even work with firewood . The rich set of accessories is a pleasant bonus - the saw comes with a set of brushes, a clamp, and a dust bag.

The maximum cut here is small, but sufficient for most jobs . It will be an excellent help both for household needs and for a small carpentry workshop.

Specifications:

• Design type: tabletop;
• Cutting height/width: 72/300 mm;
• Disc/bore diameter: 255/30 mm;
• Tilt/rotate angle: 45/45 degrees;
• Cutting speed: 55 m/s.

pros

• laser marker;
• equipment;
• powerful engine;
• assembly reliability.

Minuses

• no soft start.

BISON ZPT-210-1600 PL

Compact, single-speed tool for handling workpieces of various sizes.

Equipped with a table for fixing the device, the cutting head can easily be tilted to the right and left if necessary.

The sharp disc copes well with workpieces up to 60 mm thick.

The laser line will allow you to accurately guide the cutting elements.

Power parameters and cutting elements allow you to work not only with wood, but also with thin-walled metal and plastic materials.

The output does not chip and is easy to install and transport. Compared to most models, it has a fairly low noise level.

Specifications:

• Design type: tabletop;
• Cutting height/width: 70/220 mm;
• Disc/bore diameter: 210/30 mm;
• Tilt/rotate angle: 45/45 degrees;
• Cutting speed: 60 m/s.

pros

• laser marker;
• ease of installation and transportation;
• power;
• cut quality.

Minuses

• Slowly removes dust and sawdust.

Einhel TC-SM 2131 Dual

A compact and fairly lightweight miter saw is ideal for cutting fence boards, timber, and working with facing materials.

Optimal for rough work without perfectly precise dimensions. Equipped with a good motor that produces high torque speed.

Accuracy is ensured by a laser marker, but during operation it can become clogged with dust, which is why it needs to be wiped from time to time.

The dust collector included in the kit copes well with large debris, but fine dust easily scatters, contaminating the work surface; for cleanliness, it is recommended to connect a vacuum cleaner.

Specifications:

• Design type: tabletop;
• Cutting height/width: 62/310 mm;
• Disc/bore diameter: 210/30 mm;
• Tilt/rotate angle: 45/45 degrees;
• Cutting speed: 60 m/s.

pros

• laser marker;
• easy to configure and install;
• optimal height and width of cut;
• easy to maintain.

Minuses

• the laser marker becomes clogged with dust;
• Suitable for rough work.

Hyundai M 2000-255

at prices starting from RUB 9,164.

The Hyundai M 2000-255 tool was developed by a South Korean company.
It has high power and speed, while being lightweight and compact. The saw has an electronic speed control function, which allows you to configure the saw for processing various materials, in addition to wood workpieces. Smooth start with protection against sudden start helps to start work in a convenient mode and get a better cut surface. The tool is equipped with work table extensions for working with long parts. Main technical characteristics of Hyundai M 2000-255

Watch a video with an overview of the tool’s features regarding processing accuracy:

TOP 5 best professional miter saws with broaching

BOSCH GCM 12 GDL

Stationary saw with high power and torque speed . Has high

productivity, easily copes with large volumes of sawing work.

Capable of processing any type of wood, metal, and plastic without much effort.

Reliable fixation of workpieces is ensured by thrust profiles and a clamp . Long workpieces will allow you to process telescopic supports.

Adjusting and setting up the saw is very simple thanks to clear controls and accessible instructions..

Wide functionality allows you to use the saw not only in domestic conditions, but also in small workshops.

Specifications:

• Design type: tabletop;
• Cutting height/width: 104/341 mm;
• Disc/bore diameter: 305/30 mm;
• Tilt/rotate angle: 47/60 degrees;
• Cutting speed: 60 m/s.

pros

• clean cut;
• power;
• reasonable cost;
• telescopic supports for long workpieces.

Minuses

• meager equipment.

BOSCH GCM 8 SDE

Professional tool for longitudinal and cross cutting of wood blanks.

A powerful engine and high-quality sharpening of the saw blade allow you to process any type of wood.

The saw blade tilts easily, there are precise protractors for setting the angle.

The lower saw guard is automatically removed, providing greater operator safety.

Sawdust is collected using a plug-in vacuum cleaner . Ergonomics are ensured by a comfortable pistol-shaped handle; the trigger button is wide and can be pressed with several fingers at once.

Specifications:

• Design type: tabletop;
• Cutting height/width: 70/312 mm;
• Disc/bore diameter: 216/30 mm;
• Tilt/rotate angle: 60/47 degrees;
• Cutting speed: 55 m/s.

pros

• laser pointer;
• equipment;
• power;
• cutting depth adjustment.

Minuses

• poor equipment;
• no dust collector.

Metabo KGS 315 Plus

One of the best miter saws with broaching . Design features allow smooth

adjust the number of revolutions, and in combination with a sharp cutting element and high power, the tool can process various materials, including metal.

Much attention has been paid to the quality of the dust collector - a two-point vacuum system guarantees a minimum amount of dust and shavings in the workplace.

By connecting two vacuum cleaners, debris during cutting is virtually eliminated.

It is not suitable for professional use due to the low accuracy of scale markings.

Specifications:

• Design type: tabletop;
• Cutting height/width: 120/320 mm;
• Disc/bore diameter: 315/30 mm;
• Tilt/rotate angle: 47/60 degrees;
• Cutting speed: 67 m/s.

pros

• laser marker;
• smooth speed control;
• performance.

Minuses

• low accuracy of scale markings.

Makita LS1219L

A high-power table saw is a semi-professional tool.

The peculiarity of the model is the ability to set the side of the laser marker - it can go either on the right or on the left side of the disk.

The broach is implemented in such a way that the guides are pushed forward, so that nothing moves back, which allows you to place it almost flush against the wall.

There are table extenders that allow you to work with non-standard workpieces.

Rotation can be carried out both with and without angle fixation . It is possible to fix the saw for transportation.

Specifications:

• Design type: tabletop;
• Cutting height/width: 107/363 mm;
• Disc/bore diameter: 305/25.4 mm;
• Tilt/rotate angle: 48/60 degrees;
• Cutting speed: 69 m/s.

pros

• laser pointer on both sides of the disk;
• broach fixation;
• power;
• smooth start.

Minuses

• non-standard diameter of the mounting hole;
• price.

Metabo KGS 254 I Plus

One of the best and newest models of miter saws . The main advantage is asynchronous

drive, powerful motor and improved ergonomics.

The first allows you to convert electrical energy into mechanical energy, due to which a low noise level is achieved during operation, and the mechanism itself lasts much longer.

Equipped with a cutting depth adjustment, a bright laser pointer and a precise scale.

The cleanliness of the workplace will be ensured by a dust collector with a two-point intake, thanks to which the spread of dust outside the working area and its direct contamination will be minimized.

Durable stops will not allow you to move even under heavy loads and when working with hard wood.

Specifications:

• Construction type: manual;
• Cutting height/width: 90/305 mm;
• Disc/bore diameter: 254/30 mm;
• Tilt/rotate angle: 46/47 degrees;
• Cutting speed: 62 m/s.

pros

• accurate scale;
• ergonomics;
• engine power;
• strong stops.

Minuses

• heavy.

Selecting consumables

The quality of work with the workpiece depends on the parameters of the tool and the saw wheel. Disks differ from each other according to three criteria:

outer diameter;

Size and shape of teeth. Saw wheels for cross-cutting with broaching can be universal (for finishing), for longitudinal and transverse cuts. The size of the teeth directly affects the quality of cutting - the larger they are, the rougher the part is processed. So, to cut laminate, varnished or painted wood, you should take a fine-toothed wheel. For long-term work, it is better to choose a disc with slots, as they prevent the cutter from deforming when heated and reduce the noise level.

Saw with broach - what is it and the principle of operation

A miter saw with a broach is useful when working with lining and when laying out skirting boards and baguettes, as well as when carving narrow boards, slats, and bars.

The base includes handles with a switch and a working circle with an electric motor, mounted on the base.

A functional module is mounted on parallel slats, ensuring free movement of the saw blade directly during operation.

Thanks to the broaching mechanism, it is possible to work even with the widest boards in one go, without wasting extra time.

Hitachi C10FSH

at prices starting from RUB 47,999.

Hitachi C10FSH tool from a Japanese manufacturer, equipped with a full range of functions for high-quality processing of parts in construction or furniture manufacturing.
The broaching function and disc diameter allow processing workpieces with a width of more than 300 mm. Smooth start, which reduces the recoil force when starting the engine, and the function of maintaining speed under load guarantee high quality cutting. The tool is ergonomic and easy to use. Main technical characteristics of Hitachi C10FSH

Watch a video with a brief overview of the characteristics of the tool:

Which company should you choose?

The list of leaders includes:

• Zubr is a Russian manufacturer of power tools in the budget segment. There are both simple household saws and professional models for complex processing.
• Metabo - a German manufacturer supplies semi-professional and professional devices with high build quality, sharp discs, and engine power. The main disadvantage is the fairly high cost.
• Makita is a Japanese brand that supplies high-quality and reliable devices with branded components. Many of them are equipped with comfortable tables and a well-thought-out pulling mechanism.
• Caliber is another Russian manufacturer whose miter saws are distinguished by large saw blades, structural strength and reliable fixation of workpieces. The tool can work with materials of varying hardness, including not only different types of wood, but also metal and plastics.

JET JSMS-12L

at a price of RUB 23,940.

JET JSMS-12L tool from a Swiss developer, with high power and speed.
The laser marker is equipped with a fine adjustment screw, which allows you to adjust the beam line to the desired parameters. The rotation of the worktable is fixed using a latch stopper, which allows for quick and accurate installation. The cutting depth adjustment function allows you to process complex parts in the manufacture of furniture or carpentry. The tool is equipped with work table extensions for working with long workpieces and a clamp for fixing parts. Main technical characteristics of JET JSMS-12L

Watch a short video overview of the characteristics of the tool:

DeWALT DW713

A reliable and high-quality miter saw is intended for construction workshops or field installation work. According to user reviews, this model has good characteristics: clear settings; no need for regular adjustment (fine-tuning of the mechanism); precision of work, even when sawing a wooden workpiece on both sides, defects are excluded. The DeWalt miter saw is very easy to use and is suitable for users with any experience in carpentry. All angle adjustments are carried out simply and easily; the adjustment mechanics are not overloaded with various elements, which will shorten the process of setting up the unit. According to owner reviews, this model is suitable for cutting lining, various wooden pieces, including baseboards, as well as for cutting plastic and aluminum.

Advantages:

• exact factory settings
• rigid and durable table, complete absence of play
• high power (1.6 kW)
• stamped degree markings
• reliable engine
• it is possible to adjust the stop

Flaws:

• the absence of a soft start requires reliable fixation of the workpiece
• no vertical markings provided

How to start

It would seem, what’s so complicated here? You simply connect the unit to the network and press the “trigger” to cut the next workpiece. However, this is not at all true. Manufacturers are well aware that this powerful power tool can cause serious injury to a worker in an instant. Therefore, when you press the trigger, the miter saw starts in idle mode, and it will start cutting after the lock in the form of a special lever on the body is removed, the cutting disc drops down and touches the workpiece.

Attention!!! When purchasing a tool, do not skimp on the size of the disc, as the depth and speed of the cut will depend on this.

Interskol PTK-216/1100

A universal miter saw for home use or work in a small workshop has collected a lot of positive reviews. The 2-in-1 unit combines both a miter saw and a circular saw, and with a little skill its potential can be increased to a miter box and miter saw. Despite the average power of 1.1 kW, at 5000 rpm the blade does not get stuck in hard wood and provides a clean, precise cut. The removal of dust and shavings is well designed; a vacuum cleaner can be connected to the tool, which is very useful when sawing in a confined space or apartment. When choosing a reliable miter saw at an affordable price, the model from Interskol will be one of the best options in the rating.

Advantages:

• good build quality and reliable electric motor
• wide production capabilities
• precise and clean cuts
• solid platform

Flaws:

• uninformative instructions
• the equipment varies depending on the series (discs with 40 or 24 teeth)

Related Posts

Top 8 miter saws for wood equipped with a broach mechanism. Which miter saw is best for installing doors?

Contents: Miter saw: device, purpose and abilities Electronic miter saw: aspects and aspects of selection Miter saw blades: what is the difference between them

Cutting finishing materials at an angle is, frankly speaking, a difficult task, and virtually all people have problems solving it. But by and large, most finishing materials require this approach to their own installation, for example, lining, skirting boards, baguettes and, in addition, metal structures assembled from profile pipes. Well, there are a lot of such materials, and cutting them diagonally has to be done, even with very high precision. Next, together with the website stroisovety.org, we will study a tool such as a miter saw, which allows you to cope with the task of diagonal trimming. We will get acquainted with the design of this tool, evaluation aspects, which will allow you to purchase a model that is suitable for the job, and we will understand the saw blades used at the same time as equipment.

Electronic miter saw photo

A hand-held miter saw has a narrow purpose, and you are unlikely to be able to cut boards with it. Her tasks are little different - she can only make short cuts. With its help, you can cut a board in half, straighten its end, or cut the end of the board at a certain angle. About the principle, and everything else that it can do, however, believe me, this is a lot - other sawing equipment copes with such tasks much worse. Oh, sell, I completely forgot that, in addition to the type of wood, depending on the equipment used, the miter saw works with soft metals, plastic and, as needed, with thin-sheet iron, or rather with a profile made using it.

Read also: Magnetic clamps for welding

Miter Saw Abilities

The universal miter saw has a rather complex design - it consists of two main units, which are in no way distinguished by their simplicity of design. This is a bed with a rotary table and a movable cutting head with a massive electronic engine attached here.

1. Stand with rotary table. You, these two parts have no basis for doing without each other. On the bed itself there is a guide that ensures a fixed position of the workpiece. The entire miter saw table can be rotated relative to the guide by 90˚ (45˚ one way and 45˚ the other way), thus providing a simple trim of the workpiece in each direction without reinstalling the part.
2. Cutting head. It is installed specifically on a turntable - it changes its professional position together with the child. For convenience when working, a graduated scale is applied to the side of the rotary table on the bed - by combining the table mark with a certain degree value, cuts are made at any angle. This is not all - the head itself, or rather its cutting part, can tilt to the left and to the right, thereby providing an oblique cut. In most cases, the tilt is performed in one or two fixed positions (30˚ and 45˚ in either direction). Also, some models are equipped with a special broaching mechanism. A miter saw with a broach allows you to cut workpieces much wider than its regular counterpart.

What design does a miter saw have?

The question of how to choose a miter saw is best done by adhering to 5 small rules.

First you need to decide on its purpose and operating criteria. Why do you need it? What kind of work, in what quantity, do you intend to create with its help? If you are purchasing a miter saw for use at home and do not even plan to do complex operations, you can get by with ordinary equipment with a basic set of additional functions. In this case, we are talking about the professional use of a miter saw and its everyday use, then you need to choose an expanded version of this tool with a full set of additional capabilities. You will be able to consider the option of purchasing a so-called combined miter saw, which is equipped with an additional work table at the top of the cutting head, allowing it to be used as a stationary circular saw.

Miter saw for wood photo

• The second thing you need to find out is the size of the disks used. What is important is not so much the diameter of the equipment being installed, on which the depth of cut depends in all respects, but also its thickness, which affects the type of material processed by the miter saw. A good option for household use is a machine designed for a disk with a diameter of 200 mm. For professional use, it is better to get a machine with disks with a diameter of 250 mm.
• Work safety. This popular rumor, a tool without appropriate protection becomes a very unsafe assistant - be sure to carefully examine the presence of protective covers that are designed to completely cover the disk even during cutting and protection devices against accidental activation.
• Weight and dimensions of the tool. Essentially, a miter saw is a portable device - you don't want it to be very heavy. Today, since we are talking about ease of work, carefully examine the ease of movement of all its parts - pay special attention to the cutting head. A very tight motion of this part of the tool will quickly tire the miter saw operator.
• And the last thing is ergonomics; the tool is expected to be comfortable to use.

How to choose a miter saw

When choosing a miter saw, it will be useful to take into account both the power of this tool and, of course, the rotation speed of the disc. For the most part, these values ​​are calculated by the manufacturer and are good. A household tool will have lower power than a professional one, but the rotation speed of the disc is almost always the same, which is determined by the need to make a clean and even cut.

Universal miter saw photo

There are not so many differences between the discs used on a miter saw, and the main ones are the seat and outer diameter, as well as the geometry of the cutting tooth. If what remains to be done with the size of the disks is to a certain extent clear to our client (you will prefer either a 25mm or 30mm mounting hole, and their outer diameter is 210, 250 and 305mm), then the geometry of the tooth should be understood in more detail.

• It is necessary to find out the size of the tooth - the larger it is, the rougher the cut will be. It is unlikely that a disk with a large tooth will be able to cleanly cut laminated, varnished or painted workpieces - for this purpose it is necessary to obtain a disk with a small tooth. Also, the small tooth showed excellent performance when working with the duralumin profile. In general, saw blades for miter saws are divided into three types: for longitudinal cuts, for transverse cuts, and also for finishing cuts, which, you know, are universal.
• If we are talking about mass production or working with thick workpieces, it is necessary to study the presence of thin slots on the disk - by and large, these are temperature compensators whose task is to maintain the measured size of the disk when it is heated. Today, such discs are the least noisy.

Miter saw blade photo

And in conclusion, a few words about enterprises that create miter saws for wood. The favorites in the production of virtually all electronic tools are Bosch and Makita, and their miter saws are no exception. Practical tools from Metabo, Hitachi, and DeWalt also performed well. If we talk about Russian miter saws, then we’ll mention Corvette tools. So, there is plenty to choose from - the main thing is not to miscalculate your abilities.

Bosch hand miter saw photo

About the principle, and everything else that you should know about a tool such as a miter saw. Buy it, use it, don’t forget that this tool is quite scary - don’t forget about safety precautions and always be as collected and sober as possible while working!

Read also: Helicopter made from a chainsaw video

Author of the article Alexander Kulikov

A brand new door is sold without fittings. It is not difficult to install the sash into the frame, install hinges, handles, and a lock if you have the tools. Additionally, devices that help wedge the canvas in the frame, as well as additional consumables for finishing, will be useful. It is better to get a branded tool for installing an interior door, because the quality of the work performed depends on it.

First, before installation, they inspect the household tools that are available. Check its performance. A power tool lying around idle could become unusable due to exposure to dampness and dust. After checking the functionality, a list of suitable purchases is made.

Preference is given to high-quality power tools. You shouldn’t overpay for professional-class units, and it’s better to avoid cheap Chinese counterfeits. It’s normal to purchase a semi-professional branded tool. In the future, you will need it more than once at home.

When performing complex work related to dismantling an old door frame, widening an opening, cutting grooves for fittings, you need a power tool. It will not only speed up the process, but will help to get the job done perfectly. Based on your intended goals, you need the following tool to install the door:

• A miter saw will be needed during the installation of a homemade sash. With its help, you can simply make longitudinal cuts, cut elements of the door frame, reduce the size of the sash, and adjust trims and trims. A miter saw can partially replace a jigsaw.

• A hammer drill is needed when dismantling an old door frame. The introduction of different sizes of chisels and drills helps to quickly make holes for anchors and break off part of the wall when expanding the opening.

• Use an electric drill to drill holes for screws, a door handle, and select a groove for the lock if there is no router nearby. It’s important to immediately think about what drills are needed to install an interior door.

• A screwdriver with a set of attachments is not an essential power tool if you intend to install only one door. Of course, tighten a dozen screws with a screwdriver.

• A jigsaw is indispensable in the process of installing extensions and platbands. Using a set of nail files, you can quickly make even cuts when fitting planks made of wood, aluminum, plastic, and MDF.

After installing the doors, the owner will not have the power tool lying around idle. You will need it when hanging shelves, cutting wooden pieces and other household work.

You can't do it without hand tools to install doors. Even if there are electronic units nearby, it is impossible to dismantle the box without a mount or hammer in a nail without a hammer. For installing doors you will need:

• Marking pencil. It is better to use a soft rod so that when pressed it does not leave dents on the varnished surface. Of course, take a marker, unfortunately it is difficult to erase after incorrect markings.
• A chisel is one of the main tools for installing doors between rooms, helping to select recesses for fittings.

• A hammer is needed to drive nails, dowels, cut out indentations with a chisel, and destroy the wall when expanding the opening.
• A plumb line and level will help ensure that the door is installed smoothly. If the box is skewed, the sash will sag. A laser level, or bubble level, 50 cm long is suitable.

• A hand hacksaw for wood replaces a jigsaw or a circular saw. But you won’t be able to saw a piece of wood lengthwise. A hacksaw will help to shorten the elements of the box, adjust the length of the trims and extensions.

• A crowbar will make it easier to dismantle the old boat. It is more convenient to use a pry bar from a car mechanic's kit.
• A mounting gun is needed when filling the gaps between the ends of the walls and the door frame with foam. You can benefit from using a tool if you take cylinders with a tube attachment for manually squeezing out foam.

• A set of screwdrivers replaces a screwdriver. It is comfortable to use the handle with interchangeable attachments of various shapes.

• The miter box helps to make the correct cut at the required angle of the parts of the box and platbands.

A good miter saw is designed for straight or cross-cutting of various materials at a specific angle. Among the main criteria characterizing the model are the absence of error and stable operation of the electric motor.

To choose the right miter saw, it is not enough to determine the range of tasks ahead; it is important to purchase a high-quality model that will ensure maximum accuracy. The rating of the best miter saws in terms of quality and reliability will introduce you to a selection of modern models that meet all the basic requirements of carpentry and carpentry.