TOP 20 best Makita screwdrivers: 2021 rating and which best model to choose

Rating of the TOP 20 best Makita screwdrivers of 2020-2021

This rating includes the best models of Makita screwdrivers according to users and experts.

What is important in a screwdriver used for making furniture

The manufacture of cabinet furniture, as a rule, involves working on laminated chipboard (LDSP). It is the characteristics of this material that impose special requirements on the choice of a screwdriver.

The first thing you should pay attention to is how the screwdriver behaves when the “start” button is abruptly released. In other words, for example, you need to screw the confirmat and connect two pieces of laminated chipboard. You take a screwdriver, press the starter, the screwdriver starts working. Then, the moment comes when you need to stop the rotation, and you suddenly release the button. Logically, each of you will do just that. Right?

So, not all screwdrivers react the same way to a sharp release of the button. For example, a STERN brand screwdriver will continue to rotate by inertia. No, of course, it will not make an additional 20 turns, but the cartridge will still turn by about one or half a turn. What could this mean? The fact is that the laminated chipboard is covered on the outside with a thin layer of laminate, which gives it an attractive appearance. In addition, many chipboard manufacturers (most often domestic) produce obvious defects. It happens that the density of the slab does not meet the required parameters. Usually it is an order of magnitude lower than that indicated in the technical documentation for the chipboard. As a result, the chipboard inside becomes a little loose. It is almost impossible to control the density of a slab when purchasing, and it is definitely impossible to return a slab after it has been cut into parts. And therefore, such details need to be worked, but carefully. In principle, you need to work carefully with any chipboard.

So, what happens when the screwdriver continues to rotate after releasing the button. And, in general, it’s clear what’s happening - he continues to screw in the confirmation at the moment when this no longer needs to be done. As a result, if your slab is dense, then you risk simply slightly damaging the laminate. But if your chipboard is also loose, then you can “drive” the confirmat deep into half the thickness of the part or knock off the thread inside the hole. Both lead to an unaesthetic appearance and reduced structural strength.

Therefore, a screwdriver used for making furniture should stop immediately after the start button is suddenly released.

Among the screwdrivers under consideration, MAKITA and BOSCH stop dead in their tracks after releasing the button, but STERN, as mentioned earlier, continues its inertial movement. In addition, STERN brand screwdrivers are heavier than their competitors, have an awkward grip and are somewhat “angular”.

The reason why STERN is still used by furniture makers is simply simple - the price of this screwdriver is several times lower than screwdrivers from the MAKITA and BOSCH brands. Therefore, furniture assemblers somehow adapt to STERN screwdrivers, and those who do not adapt simply produce low-quality furniture. After all, the collector is also a person, he is looking for a way to make his life cheaper. True, we believe that this should be done not at the expense of the quality of the furniture produced. But opinions tend to differ. However, at this stage of testing, we are deleting the STERN brand from our list of recommended screwdrivers for furniture making, and will continue to consider the remaining ones - MAKITA and BOSCH.

How to choose a Makita screwdriver?

Despite the fact that all Makita screwdrivers are high-quality and reliable, there is a short list of criteria by which you should select a suitable device.

These technical characteristics include:

• type of power supply (battery or mains);
• torque;
• rotational speed;
• cartridge type;
• dimensions and weight;
• presence of additional elements in the kit.

If everything is clear with the basic characteristics, then novice craftsmen have difficulty selecting a screwdriver based on torque. According to this criterion, devices are divided into conventional screwdrivers and tools with a drilling function (drill-drivers). Devices of the second group are considered more universal, as they allow you not only to work with fasteners and fittings, but also to drill holes in wood and metal.

What is a screwdriver

A screwdriver is an electric tool, the main purpose of which is to carry out work on screwing in or unscrewing various screws, bolts and self-tapping screws. One can only imagine how time-consuming it would be to screw in several hundred screws by hand when assembling, for example, a typical built-in cabinet or tool rack. Using this device, the entire job will take just a few minutes. In addition, this power tool has some other additional features:

• use as a cordless drill;
• replacement of conventional hex keys using special attachments;
• backlight function in low visibility conditions.

An electric screwdriver is also convenient because it can screw screws to a given depth. Therefore, all screw heads will be located in the same plane, which will give the work a beautiful and finished look.

TOP 4 best Makita cordless screwdrivers in price/quality ratio

The Makita brand line offers a huge range of cordless screwdrivers. All of them are similar in functionality and design, but users noted four models in which reliability and quality are successfully combined with an adequate cost.

Makita DF333DWYE4 Li-Ion

A functional and reliable impact drill/driver with extended equipment will become indispensable

assistant during repair and construction work, and when assembling furniture.

The tool is equipped with a quick-release chuck, so the user does not have to use a screwdriver or other hand tool to change the bit. The device is powered by a 12 V lithium-ion battery, and the drilling function significantly expands the scope of application of the screwdriver.

The tool can be used not only for working with fasteners, but also for drilling holes of different diameters in wood and metal. A reverse mode is also provided, with which the user can quickly remove a stuck bit or screw.

Specifications:

• weight 1.1 kg;
• operating speed - 2;
• cartridge diameter 0.8-10 mm.

pros

• ergonomic handle;
• extended equipment;
• Comes with two replaceable batteries;
• convenient spacious storage case;
• adequate cost.

Minuses

• no battery charge indicator;
• Not very convenient location of the backlight.

Makita DF333DWYE

The hammerless drill/driver is distinguished by its compact dimensions, but at the same time its power and performance

enough to perform a wide range of tasks.

In particular, the tool can be used not only for working with fasteners (for example, for assembling furniture), but also for drilling holes in medium-density materials.

For ease of use, the manufacturer equipped the device with a reverse function and spindle locking, and also installed a keyless chuck. Its design is extremely simple, so replacing the bit will take no more than a minute.

The weight of the device is also light. In combination with the ergonomic design of the handle, this allows you to work with the tool for a long time without hand fatigue. The handle is additionally provided with rubberized relief linings that prevent the palm from slipping during operation.

Specifications:

• weight 1.1 kg;
• number of speeds - 2;
• cartridge diameter 0.8-10 mm.

pros

• The optimum ratio of price and quality;
• two operating speeds;
• The kit includes two batteries;
• excellent build quality;
• ergonomic handle shape.

Minuses

• not a very convenient case;
• The backlight does not focus on the work area.

Makita DF457DWE

This cordless drill-driver, despite its affordable price, can safely be called suitable

tool for professional use.

The model provides 16 torque stages, which significantly expand the scope of application. The screwdriver can be used for minor repairs at home and during professional construction work.

The tool is equipped with a quick-release chuck for quick and easy bit replacement. The kit includes 2 batteries that hold a charge for a long time and even when completely discharged completely replenish the energy reserve in just 3 hours.

The tool is also easy to use thanks to its ergonomically shaped handle with textured anti-slip inserts. Due to this, the screwdriver fits comfortably in the hand, and the user has full control of the tool during operation.

Specifications:

• weight 1.7 kg;
• number of speeds - 2;
• cartridge diameter 1.5-13 mm.

pros

• The kit includes two batteries;
• fits comfortably in the hand;
• charger with indicator;
• fast charging;
• convenient roomy case.

Minuses

• many users find the power insufficient;
• New batteries are not compatible with other brand tools.

Makita DF333DWAE

A convenient, functional and productive drill/driver from a well-known brand is distinguished by excellent

build quality at an adequate price.

In addition to the traditional scope of use (working with fasteners), the device is suitable for drilling holes of different diameters in wood and metal. To quickly change the bit, the device has a quick-release chuck, and the reverse function allows you to quickly unscrew the screw or remove a stuck bit.

The user will also be able to adjust the rotation speed using a small button on the body. The tool is powered by a removable battery, and the kit includes 2 batteries. Due to this, the screwdriver can be used for a long time by simply replacing the batteries.

For safe operation there is a locking power button, and for ease of operation there is a bright but unobtrusive backlight.

Specifications:

• weight 1.1 kg;
• number of speeds - 2;
• cartridge diameter 0.8-10 mm.

pros

• excellent ergonomics and build quality;
• no play in the gearbox;
• batteries hold a charge for a long time;
• convenient spacious storage case;
• Suitable for drilling holes.

Minuses

• poor placement of the backlight;
• Some users note noticeable play in the cartridge.

Battery power and types

An important question for builders is how to choose a cordless screwdriver tool? When choosing a cordless tool, be sure to look at the features of its charging. Drills and screwdrivers can be equipped with batteries with voltages from 7.2 to 36 volts. For home repairs, it is recommended to choose a tool with a voltage of 9 to 12 volts. Models with a power of more than 18 volts are suitable for professional builders.

One of the instruments from foreign manufacturers.

The power of the drill/driver depends on the type of electric battery selected. It can be nickel-cadmium, nickel-metal hydride and lithium-ion.

The most inexpensive batteries on this list are nickel-cadmium (NiCd). They are relatively heavy, but such batteries are inexpensive, can withstand about 1000 charge-discharge cycles and operate at sub-zero air temperatures. Such batteries provide stable power and do not overheat.

Nickel metal hydride (NiMh) batteries cost a little more, take longer to charge, are more compact and can also operate at low temperatures.

The lightest and fastest charging batteries presented are lithium-ion (Li-Ion). They charge quickly, and the charging and discharging of the battery is controlled by a special protection system. One of the disadvantages of such batteries is that it is problematic to work with them in winter frosts.

Thus, each type of battery has its own advantages and disadvantages, so it is impossible to say for sure which one is better.
It all depends on the time of year, the object and the type of work you are going to do. Expert opinion Sergey Pochtarev, master, Nizhny Novgorod.
If you are on a small budget, I would recommend purchasing a classic screwdriver with lithium batteries. They are lightweight, charge quickly and last a long time.

TOP 4 best Makita cordless drills and screwdrivers

Drill-drivers differ from conventional power tools in that they have increased power and increased torque, so they can be used for drilling holes in wood, metal and concrete. The Makita brand has 4 models that users rated the highest.

Makita DF347DWE

A relatively inexpensive, but very powerful and functional drill/driver that can be used

when carrying out a wide range of construction and repair work.

Due to the separate drilling function, the tool can be used to make holes in wood and metal (up to 25 and 10 mm, respectively).

The device has an engine brake and reverse. The last function is very useful if you need to unscrew an unsuccessfully screwed in screw or remove a stuck bit.

The user will also be able to adjust the rotation speed using a simple button on the body, and the locking of the power button will ensure safe operation.

The power tool comes complete with a case, two batteries and a charger.

Specifications:

• weight 1.4 kg;
• number of speeds - 2;
• cartridge diameter 0.8-10 mm.

pros

• fits comfortably in the hand;
• low weight with high power;
• The battery holds a charge for a long time and charges quickly;
• convenient and roomy case;
• There is a power button lock.

Minuses

• may burn when drilling holes in hard material (for example, concrete);
• no backlight.

Makita DDF485Z

The hammerless drill/driver belongs to the middle price category, but at the same time has all the necessary

functions for a wide range of construction and repair work.

The maximum number of revolutions is 1900 per minute, and a special drilling mode significantly expands the scope of application. A screwdriver is perfect for working with fasteners and for making holes in wood and metal. The device is equipped with a quick-release chuck, so changing the bit does not take much time.

Like many other devices of the brand, this model has a reverse function and spindle lock. There is also a convenient adjustment of the rotation speed (by pressing a special button), spot illumination of the working area and a locking of the power button.

Specifications:

• weight 1.1 kg;
• number of speeds - 2;
• battery voltage 18 V.

pros

• reliable brushless motor;
• high power expands the scope of application;
• comfortable, ergonomically shaped handle with anti-slip pads;
• there is almost no backlash in the cartridge;
• The battery holds a charge for a long time.

Minuses

• when tightening small screws, it is difficult to control the torque due to the high power;
• inconvenient location of the backlight.

Makita DF330DWE

For users looking for a simple, reliable and inexpensive power tool, this is definitely worth a look

pay attention to this drill/driver. The manufacturer made sure that the device has all the necessary functions for construction and repair work.

In addition to fixing fasteners, the device can be used for hammerless drilling of holes in wood (up to 21 mm) and metal (up to 10 mm). If the bit accidentally gets stuck, the owner can use the reverse function to remove it. The same mode will help remove an incorrectly screwed screw.

The device is equipped with a quick-release chuck, the design of which allows for quick replacement of bits without the use of additional tools.

Along with the screwdriver itself, the user receives a convenient, roomy storage case, two replaceable batteries, a charger, a holster and a bit.

Specifications:

• weight 1 kg;
• number of speeds - 2;
• cartridge diameter 0.8-10 mm.

pros

• Compact dimensions and low weight ensure ease of use;
• high power makes the device suitable for professional use;
• bit included;
• convenient illumination of the working area;
• adequate cost.

Minuses

• there is a slight play in the cartridge;
• The backlight takes a very long time to turn off.

Makita DDF453RFE

This drill-driver is an expensive power tool, but practical experience of use has shown

that the cost is fully justified by the convenience and functionality of the device.

The maximum number of revolutions is 1300 per minute, so the screwdriver can be used not only for working with fasteners, but also for drilling holes. A separate mode is provided for this, and the device’s power is sufficient for drilling metal and wood.

The device is not suitable for drilling holes in concrete, since the engine may simply burn out due to increased load. Additional functions include engine brake, reverse and convenient rotation speed adjustment. There is also a power button lock, and the device itself comes with a case and a charger.

Specifications:

• weight 1.8 kg;
• number of speeds - 2;
• battery voltage 18 V.

pros

• high power;
• A high-quality bit is included in the kit;
• spacious case;
• fits comfortably in the hand;
• Compatible with other batteries.

Minuses

• no replaceable batteries included;
• Some users find the screwdriver too heavy.

A few words about the impact wrench

An industrial or homemade impact wrench is used to install and remove bolts and nuts. Some may accidentally confuse it with a drill, but experienced craftsmen will immediately point out the special attachment in the holder that a regular drill does not have. You definitely won’t be able to do without it if you need to unscrew an old nut that is so rusty that you simply can’t unscrew it with your hands or a wrench. The tool is available in the following versions:

• pneumatic;
• gasoline;
• hydraulic;
• powered by electricity.

The impact wrench is widely used in repair shops and for various assembly work. More powerful tools are used in mechanical engineering.

TOP 3 best Makita cordless impact screwdrivers

Impact screwdrivers have increased power and performance, making them suitable for a wide range of construction and repair work.

Makita DHP482Z

The impact drill/driver has amazing ergonomics and increased power, so it can be successfully

cope with a wide range of work.
In addition to working with fasteners and traditional drilling, the device can be used for hammer drilling, so the tool can be used to make holes in hard materials such as concrete.
The device is equipped with a quick-release chuck for easy replacement of bits, and the reverse function allows you to quickly remove a stuck screw or bit.

The tool is powered by a removable battery, but spare batteries are not included and the user will have to purchase them separately. Along with the tool itself, the user receives a convenient storage case, a belt clip and a bit.

Specifications:

• weight 1.8 kg;
• number of speeds - 2;
• battery voltage 18 V.

pros

• reasonable cost with advanced functionality;
• high power;
• there is a convenient but unobtrusive backlight;
• There is a hook for attaching to a belt;
• Suitable for professional use.

Minuses

• sometimes there is a manufacturing defect;
• Supplied without battery and charger.

Makita DHP485Z

Convenient and functional impact drill/driver with quick-release chuck and expanded scope of application

.
The device is battery-powered, so it can be used for construction and repair work even on the street or in rooms where there is no power supply.
In addition to traditional work with fasteners, the tool is suitable for conventional drilling and hammer drilling. Replacing the bit is also not difficult, because the device is equipped with a convenient and simple quick-release chuck.

Additional functionality includes reverse and spindle locking. There is also a smooth adjustment of the rotation speed and a locking power button.

The spotlight provides high-quality viewing of the work area. Unfortunately, the tool does not come with a charger or replacement batteries.

Specifications:

• weight 1.7 kg;
• number of speeds - 2;
• cartridge diameter 1.5-13 mm.

pros

• comfortable, ergonomically shaped handle;
• reasonable cost;
• expanded scope of application;
• convenient and spacious storage case;
• reliable brushless motor

Minuses

• No battery included;
• Not very convenient location of the backlight.

Makita HP333DWME

One of the most expensive models in the Makita brand line, but users note that the device has

advanced functionality and thoughtful design.

The device is equipped with a quick-release chuck, which allows you to save time on replacing bits, and you do not have to use additional tools for this. The screwdriver itself is battery-powered, which will allow the owner to move freely around the room and perform a wide range of work.

The model can be used both for traditional work with fasteners and for drilling holes, including with impact. For ease of use, there is a spindle lock, a power button lock, and a reverse function for removing a stuck bit or screw.

Specifications:

• weight 1.2 kg;
• number of speeds - 2;
• cartridge diameter 0.8-10 mm.

pros

• The kit includes two batteries;
• ergonomic handle with anti-slip pads;
• spacious case;
• there is an engine brake;
• no chuck play.

Minuses

• inconvenient location of the backlight;
• Some users find the price too high.

BOSCH GSR 180-LI

build quality;
high power;

lightweight body;

there is a convenient case;

affordable price.

The included batteries quickly fail.

Makita DF333DWYE4

https://market.yandex.ru/product—akkumuliatornaia-drel-shurupovert-makita-df333dwye4-12-v-1-5-a-ch-kh2-keis-nabor-bit/578384011

A simple, inexpensive, but reliable device that will become an assistant during repairs or when assembling furniture yourself. The universal diameter (0.8-10 mm) of the chuck will allow you to use the screwdriver when working with various fasteners, and a torque of 30 Nm will ensure their quick fixation.

Additionally, the Makita DF333DWYE4 has a drilling mode, through which the operator quickly makes holes of the required diameter in wood or metal. The developer has equipped the screwdriver with a reverse option, so you can quickly remove a stuck bit or screw. On the case, in addition to the start key, there is a button that regulates the rotation speed.

A comfortable rubberized handle will ensure proper grip, which will improve control of the Makita DF333DWYE4 and reduce fatigue. The screwdriver also boasts a built-in backlight for comfortable operation in low light conditions and a metal clip for carrying the device on a belt.

Nice design

TOP 3 best professional Makita screwdrivers for 18 volts

The Makita company produces not only power tools intended for household use, but also professional devices that can be used to perform a wide range of construction and repair work. Among the professional tools, users highly rated three models.

Makita DF457DWEX8

A relatively inexpensive drill-driver has all the necessary characteristics for

professional use.
It has a quick-release chuck for easy bit replacement, a reverse for removing screws and stuck bits, and convenient electronic rotation speed control.
The device is battery-powered, which ensures high autonomy, and two removable batteries and a charger are included with the device.

For safe operation, the power button is locked, and the battery is very easy to remove from the case for quick replacement. A motor brake is also provided, and its power is sufficient for drilling holes in wood, metal and concrete, including with impact.

Specifications:

• weight 1.7 kg;
• number of speeds - 2;
• cartridge diameter 1.5-13 mm.

pros

• increased power expands the scope of application;
• Adequate cost combined with high-quality assembly;
• convenient case and two batteries included;
• fits comfortably in the hand due to the ergonomically shaped handle;
• The battery holds a charge for a long time.

Minuses

• noticeable backlash of the cartridge;
• no backlight.

Makita DFS251Z

One of the most expensive screwdrivers of the Makita brand, but the cost is fully justified by the fact that the device

intended for professional use.

Autonomy is ensured by a removable battery, although a spare battery and charger are not included in the kit. The tool has a fairly bright illumination of the working area, and the design of the screwdriver itself allows you to use bits even without a chuck.

Additional functionality includes locking the power button, smooth electronic speed control and reverse. The increased power allows you to use a screwdriver for drilling holes, although there is no separate mode for impact drilling.

Specifications:

• weight 1.8 kg;
• number of speeds - 1;
• battery voltage 18 V.

pros

• ergonomically shaped handle;
• suitable for professional use;
• high power engine;
• excellent build quality;
• there is a reverse.

Minuses

• no batteries or charger included;
• the cost is higher than that of analogues.

Makita DHP481Z

The cordless impact drill/driver will successfully cope with a wide range of construction and repair work.

. The device is equipped with a convenient quick-release chuck, so you can change the bit in just a minute without using additional tools.

An increased number of revolutions and special modes significantly expand the scope of application of the device. It can be used for working with fasteners and for drilling holes in various materials (including with impact).

For more convenient operation, the device provides reverse, smooth adjustment of the rotation speed using a special button, and on the body there is a special drilling depth limiter and convenient spotlighting of the working area. For more comfortable carrying and operation, the manufacturer has equipped the screwdriver with an additional handle.

Specifications:

• weight 2.7 kg;
• number of speeds - 2;
• chuck diameter 13 mm.

pros

• advanced functionality;
• comfortable handle and thoughtful design;
• case and two spare batteries included;
• there is a hammer drilling mode;
• increased power.

Minuses

• impressive weight;
• high price.

ELITECH YES 18SL2

there is overload protection;
25 torque levels;

spindle lock option;

comfortable handle;

nice design;

convenient case.

loose fixation of the bit in the chuck.

Interskol DA-18ER

https://market.yandex.ru/product—akkumuliatornaia-drel-shurupovert-interskol-da-18er-promo-li-ion-2-a-ch-18-v-kh2/724058168

A convenient screwdriver from a well-known manufacturer, designed for working with fasteners and drilling holes. DA-18ER is equipped with a powerful brush motor, a two-speed gearbox and a clutch with 19 levels of torque control.

The handle is quite ergonomic and has rubberized inserts, which will allow you to comfortably hold the screwdriver. DA-18ER operates on the basis of a battery with a capacity of 2 Ah. The design includes LED illumination of the workspace and a quick-release chuck, which increases comfort when solving professional tasks. The device is distinguished by the ability to adjust the degree of tightening of the fasteners.

Users note that the DA-18ER provides reliable overload protection, which will increase the service life of the screwdriver. The package includes, in addition to 2 lithium-ion batteries with a voltage of 18 V, interchangeable bits and drills, a charger, a magnetic extension adapter and a plastic case.

Light weight

TOP 3 best Makita screwdrivers with high torque

High torque screwdrivers are good because they are suitable for a wide range of jobs. They have high power, but the manufacturing company took care of the ergonomics of the handle, so the device is very comfortable to hold in your hand.

Makita DHP458RFE

This impact drill/driver is considered expensive, but the high cost is fully justified by the advanced

functionality and increased power.

High torque allows you to use the device not only for working with fasteners, but also for drilling holes (classical and with impact) in wood, metal and even concrete.

Other functions typical for power tools of this brand are also present. These include reverse, locking the power button, spindle locking and smooth adjustment of the rotation speed using a special button.

For more convenient operation, the manufacturer has additionally equipped the tool with a drilling depth limiter, a special socket for attaching bits and a quick-release chuck. There is also an additional handle and convenient spot illumination of the work area.

Specifications:

• weight 2.3 kg;
• number of speeds - 2;
• chuck diameter 13 mm.

pros

• expanded functionality and equipment;
• very high power;
• two operating speeds;
• case and spare batteries included;
• Comfortable, ergonomically shaped handle.

Minuses

• inconvenient lighting;
• high price.

Makita DDF481RTE

The hammerless drill/driver is designed to perform a wide range of jobs.

Due to the high torque, it can be used not only for working with fasteners, but also for drilling holes in wood and metal (up to 76 and 13 mm, respectively). A separate mode is provided for drilling.

There is also a reverse function and smooth adjustment of the rotation speed. To do this, the user simply needs to press a button.

The tool is traditionally equipped with a quick-release chuck. Its successful design allows you to replace the bit in just a minute, without using additional tools and accessories.

Along with the power tool itself, the user receives a spacious case, two spare batteries and a charger for them, as well as a convenient additional handle.

Specifications:

• weight 2.6 kg;
• number of speeds - 2;
• chuck diameter 13 mm.

pros

• bright and well-placed lighting;
• high power and torque;
• two batteries and a case included;
• there is an additional handle;
• advanced functionality.

Minuses

• high price;
• impressive weight.

Makita DHP451RFE

Another successful model of cordless screwdriver for household and professional use.

The functionality of the device is not limited to working with fasteners. Due to separate drilling and impact drilling modes, the user will be able to use the device to make holes in metal and wood, and when using special bits, in concrete.

Replacing the bit is also not difficult, since the device is equipped with a convenient quick-release chuck.

The device is battery-powered, which ensures autonomy of its use. Along with the device itself, the user receives a convenient case for transportation and storage, two replaceable batteries and a charger for them.

Users also positively assessed the convenient ergonomic shape of the case, the presence of an additional handle and a drilling depth limiter.

Specifications:

• weight 2.2 kg;
• number of speeds - 3;
• battery voltage 18 V.

pros

• expanded functionality and equipment;
• there is an additional handle;
• a drilling depth limiter is provided;
• two batteries included;
• comfortable ergonomic handle.

Minuses

• high price;
• Sometimes there is noticeable play in the cartridge.

BOSCH GSR 120-LI

low noise level;
small size and weight;

there is no chuck play;

bright backlight;

2 removable batteries.

in some cases the key is faulty;

uncomfortable handle.

ELITECH YES 18SL2

https://market.yandex.ru/product—akkumuliatornaia-drel-shurupovert-elitech-da-18sl2-promo-li-ion-1-7-a-ch-18-v-x2-keis/875575030

A compact model from a reliable brand, which is designed for unscrewing or tightening fasteners and drilling holes in a shockless mode. The device is equipped with 2 speed modes and an efficient brush motor.

YES 18SL2 has 25 torque stages, so you can adjust the power to suit the job and material. For work in remote places, the design provides lighting. The keyless chuck allows you to easily change bits and drills.

YES 18SL2 has a convenient indicator that will help you monitor the battery charge level. The package includes 2 replaceable batteries with a voltage of 18 V, a charger for them and a convenient case. Users note the ease of use, as well as the affordable price of the screwdriver.

Spindle lock option

TOP 3 best Makita corded screwdrivers

Makita corded screwdrivers have the same functionality as cordless models, but only operate on mains power. Due to this, such devices are usually purchased for domestic use.

Makita HP0300

Inexpensive, convenient and quite functional impact drill-driver works only from a power outlet,

but at the same time it has a full range of necessary functions.

The device can be used both for working with fasteners and for drilling holes in wood and metal. The device is not suitable for drilling holes in concrete due to insufficient power.

The device has separate modes for drilling and drilling with impact, there is a reverse and a convenient button for smoothly adjusting the rotation speed. A bit is provided with the device. A case for storage and transportation is not included in the package.

Specifications:

• weight 1.3 kg;
• number of speeds - 2;
• cartridge diameter 1-10 mm.

pros

• affordable price;
• excellent build quality;
• fits comfortably in the hand;
• acceptable operating power;
• There is a reverse function and a power button lock.

Minuses

• gets noticeably hot during operation;
• no case included.

Makita DF0300

Another inexpensive but functional model that is perfect for performing simple repairs.

work at home.

The device operates on mains power, is equipped with a quick-release chuck and has a comfortable, ergonomically shaped handle with anti-slip pads. The number of revolutions of the device is sufficient not only for working with fasteners, but also for drilling small holes in wood (up to 28 mm) and metal (up to 10 mm).

There are also no problems with replacing bits, since the model is traditionally equipped with a convenient quick-release chuck. Additional ease of use is provided by the reverse functions, smooth adjustment of the rotation speed using a special button and the locking of the power button.

Specifications:

• weight 1.2 kg;
• number of speeds - 2;
• cartridge diameter 1-10 mm.

pros

• reasonable price combined with excellent build quality;
• comfortable ergonomic handle;
• advanced functionality;
• no chuck play;
• The power is sufficient for domestic use.

Minuses

• short power cord;
• there is no immediate stoppage of work.

Makita 6805BV

This screwdriver model, although it runs on mains power, has high power and extended

functionality.
Due to this, power tools can be used for a wide range of construction and repair work, from fixing fasteners and assembling furniture to drilling holes of different diameters in metal and wood.
The manufacturer has equipped the device with a reverse function, thanks to which a stuck screw or bit can be removed with just a few rotations.

To make it easier to replace bits, the manufacturer has provided a quick-release chuck, and for safe operation, a locking power button. The model is also suitable for using bits without a chuck, and the design of the device includes a drilling depth limiter.

Specifications:

• weight 1.9 kg;
• number of speeds - 1;
• power consumption 510 W.

pros

• ergonomic handle shape;
• smooth adjustment of rotation speed;
• there is a drilling depth limiter;
• excellent build quality;
• advanced functionality.

Minuses

• more expensive than analogues;
• The location of the reverse button is not very convenient.

What is the difference between the tools

An impact wrench is generally considered a tool for professionals, while a screwdriver is mainly used for smaller household jobs. The main differences between a wrench and a screwdriver are their following characteristics.

• An impact wrench is more bulky than a screwdriver and does not have a chuck. At the end there is a special rod on which a nut head is attached.
• The power of a wrench applied to an object is many times greater than the power of a screwdriver. Using the first one, you can solve any “problems”.
• There is a significant difference in the weight and size of these mechanisms. Impact wrenches are usually larger and heavier.
• Screwdrivers have several operating modes that can be adjusted. Unlike them, no other special tools have this capability.

Thus, impact wrenches are used more often for heavy mechanical work, while its competitor is more often used for simpler household repairs. In addition, for simple tasks, you can try to make a wrench yourself using ordinary attachments.

Which tool is better to choose? The answer to this question will depend on the type of work where these tools will be needed. Considering that the impact wrench has a tangential impact during operation, it cannot be used for tightening screws, as it will simply tear off their heads. However, if you ensure that there is no stop, then it can make a fastening that even the most powerful screwdriver cannot create. If there is a small amount of work to be done, including only screwing in screws, then an ordinary screwdriver will be enough for this. Therefore, it is necessary to decide what to choose for the job - a screwdriver or a wrench, based on specific circumstances.

READ Screwdriver Sparks Inside and Smokes

Types of Makita screwdrivers

Like screwdrivers from other brands, Makita devices are divided into several types according to the type of power supply and functionality.

Depending on the type of motor, the devices are either brushless or brushed. Engines of the second type are considered obsolete due to rapid wear. Brushless motors have high power, do not spark during operation and wear out much more slowly.

According to the method of power supply, screwdrivers are divided into mains and cordless. Mains-powered ones are cheaper, but battery-powered ones are in great demand because they are self-contained and can be used without being connected to the mains.

The simplest Makita screwdrivers are designed only for working with fasteners. But there are models that have a drilling mode and an impact mode. With this tool you can easily drill holes in wood, metal and even concrete.

What is the difference between a wrench and a screwdriver?

During work, difficult situations often arise when the use of just a wrench becomes clearly insufficient. Then you have to pick up special tools: they help in working with parts that have threads. Among them are a screwdriver and a wrench. These technical devices serve one purpose - to speed up work involving a large number of nuts, bolts and screws. At the same time, despite the similarity of the problems being solved, they also have a number of significant differences. You can learn about this and which tool is best to use from the review below.

Which is better - Makita, Bosch or Metabo?

All of the listed brands have long earned the trust of users, because their products are distinguished by excellent build quality, ease of use and advanced functionality. But it is Makita screwdrivers that are considered the best in terms of price and quality ratio.

Metabo and Bosch devices are more expensive, but by choosing the right Makita screwdriver model, the user will be able to perform a lot of work without spending a significant amount of money on the purchase of a power tool.

Which screwdriver is better? Review of the most popular screwdriver models

If you decide to purchase a screwdriver, then when choosing the most suitable model you should be guided by such characteristics as power, battery capacity and ergonomics. When choosing a screwdriver, you should also take into account the conditions in which the tool will be used. In this review, we will look at products from the most well-known manufacturers, and we will touch on both budget and more expensive and productive models designed for use for professional purposes.

Sources:

https://tehnika.expert/dlya-remonta/shurupovert/ili-gajkovert-v-chem-otlichiya.html https://newspasky.ru/raznoe/shurupovert-14-ili-18-volt-shurupoverty-i-12 -v-i14-18-v-chem-razlichiechto-luchshe.html