Rating TOP 7 best metal roof tiles

People who are starting construction or have already come to the point of erecting a roof are faced with a choice of materials. Metal tiles are considered the most popular and affordable. The appearance of the building, as well as the reliability of the roof, depend on the correct choice.

To make the right choice, you need to know the basic parameters, and the article will help indicate which is the best metal tile in 2021, what you need to pay attention to. The rating is based on expert and consumer opinions, as well as the main parameters of the product.

Content

Advantages and disadvantages
Comparison with analogues
Rating of the 7 best metal tiles MP Cascade
MP Tramontana-SL NormanMP
MP Monterrosa-SL NormanMP
MP Maxi
MP Supermonterrey (VikingMP® E)
Monterrey MP Monterrosa-SL (VikingMP® E)
Montecristo MP Monterrosa-SL (VikingMP® E)

comparison table

TOP 5 most important questions about metal tiles

Video

Addresses of the best companies by city

Ufa

Novorossiysk

Rostov-on-Don

Moscow

Saint Petersburg

Installation

To avoid any difficulties during installation, the manufacturer's instructions describe each step of the installation technology, answering which insulation is best to choose, which waterproofing and vapor barrier to use. The work is carried out in the following order:

First, a waterproofing film is laid directly on top of the rafter legs. It is rolled out in strips with an overlap of 15-20 cm. For better waterproofing, the joints can be glued.
Sheathing slats are installed perpendicular to the rafters. The first batten is installed 3-5 cm higher so that it is covered by the outer edge of the module.
Counter battens are fixed on top of the sheathing along the rafter legs.
First, the starting coating module is fixed, then the next one on the left side of it. Next, the sheet located above the starting one is laid, after which they move on to the fourth element, located above the second.

Differences in laying regular and modular tiles

Do-it-yourself installation of modules

Important! There are popular posts on the Internet where bitumen and modular shingles are cut with a grinder. In fact, it is impossible to use grinding machines to cut these materials, since due to the abrasive effect on them, sparks appear that burn micro holes in the protective layer.

Advantages and disadvantages

Each roofing material has its own positive and negative characteristics, metal tiles are no exception. Let's look at the pros and cons of this roofing material below:

long service life (50 years);
resistance to external influences (can be used in any climatic conditions);
fire safety due to the production of metal roofing;
low price (in comparison with analogues it is one of the cheapest on the market);
lightness (1 square meter weighs about 5 kilograms).

noisy (quite high noise level during rain and hail).

Varieties of flexible tiles

Basic structure of the material.

The base is fiberglass, cellulose fabric, construction cardboard. Determines the hardness of the coating.
Modified bitumen - it is not so much its composition that is important, but its quantity. This is the main working substance of the roof, as it determines the level of water resistance and elasticity. If its quantity is small, the material cannot withstand frost and heat. When there is a large amount of precipitation, it begins to become saturated with water.
Granulate is the top face layer. Determines the appearance of the shingle and its resistance to heating and cooling.

On the underside of the material there is a polyethylene film, bitumen adhesive and a protective film. The glue allows you to lay the material without attaching it to screws. The insulating film is temporary. It protects the adhesive layer and is removed before work.

By number of layers

The thickness of the shingles determines the durability of the material. The thicker the coating, the better its performance. This is achieved through the thickness of the base and multi-layering.

Single-layer tiles are a cheap, relatively thin material. Serves from 25 to 30 years. Not recommended for areas with heavy snowfall and frost.
Two-layer – total thickness reaches 5–6 mm. It has a more voluminous texture and high mechanical strength. Serves from 25 to 55 years.
Three-layer – composite decking up to 9 mm thick. Usually it has an interesting volumetric cut and different textures, which makes this coating very attractive. Service life from 55 to 70 years.

The thicker the material, the greater its weight. This must be taken into account when calculating the rafter system.

By purpose

Ridge-eaves shingles
There are 2 types of shingles: ridge-eaves and ordinary.

Ridge-cornice - rectangular sheets without a figured edge. They are used as a starting strip when installing the roof, as well as for decorating the ridge and ribs of the roof. It has an adhesive layer on the back side. It is laid end-to-end and secured with nails closer to the perforation site.
Ordinary - a sheet of “tile” covering. The top edge is smooth, the bottom is figured. It also has an adhesive layer. But when the roof slope is above 20 degrees, it is fixed with nails. The first row of ordinary shingles is installed so that it overlaps the joints of the eaves.

The tiles are of the same color and texture.

By material

Typically, soft tiles are made from fiberglass impregnated with bitumen and SBS polymer. The
as a base :

construction cardboard;
cellulose fabric - differs from cardboard in greater flexibility and longer fibers;
fiberglass - the most resistant to wear and mechanical damage;
reinforced fiberglass - additional strength is provided by the addition of polyester fibers.

The bitumen composition can also be different. The composition is selected according to its intended purpose. In northern regions, tiles are exposed to temperature changes. To maintain integrity, it must have a sufficient coefficient of thermal expansion. SBS polymers are introduced into the bitumen composition .

Another type is oxidized bitumen . Thanks to the artificial aging process, it has a long service life. However, such “hardening” makes the material hard. Therefore, it is used only in the southern regions.

Stone chips protect against overheating and hypothermia, compensate for mechanical shocks and give the shingles shade and texture. Used:

basalt;
anthracite;
slate;
blue colored granules are produced artificially and therefore are more expensive.

Stone chips are used in the middle fraction. It is allowed to use coarse quartz sand for sprinkling.

How to choose a color

Most often, the color is determined by the shade of the stone chips, but additional coloring is also possible.

There are the following options:

monochrome - the tiles have one shade: graphite, terracotta, ocher, dark green;
multicolor - a combination of 2 or more shades;
with a 3D effect – creates volume through color combinations.

Valera

The voice of the construction guru

Ask a Question

The shade of the material is chosen based on the color of the facade and the design style. But since the material reproduces ceramic tiles or shingles, preference is given to soft, dark, dim shades. White material or any other light color is not produced.

Comparison with analogues

To get a better idea of the differences between different roofing materials, let’s look at other types of roof coverings in a comparative table.

Material	Service life, years	Fire hazard	Noise level	Health safety	Strength	Price, rub/sq.m
Metal tiles	50	safe	high	safe	high	335
Asbestos cement slate	30	safe	short	harmful	low	220
Euroslate	20	safe	short	harmful	low	235
Corrugated sheet	45	safe	high	safe	high	235
Bituminous shingles	25	safe	short	safe	low	240
Ceramic tiles	150	safe	short	safe	high	1 407

Advantages of the material

Many homeowners are increasingly installing modular metal tiles, abandoning cheaper materials. The main advantage of this technological coating is that it was simply created to make it easier to install the roof yourself. The strengths of modular metal profiles are:

Light weight . Modular metal tiles are a lighter roofing material. The weight of one element does not exceed 4 kg, so its installation does not require reinforcement of the rafter system and sheathing.
Optimal size . The small size of the individual parts of the metal tile simplifies the cutting of the covering, and also reduces the amount of residues and trimmings, which ultimately has a positive effect on the consumption of roofing material.
Simplicity of installation technology . Re-roofing is not an easy task; usually experienced craftsmen are involved in such work, as well as special equipment, and scaffolding is installed. The small size and light weight of the module allows you to install it yourself almost alone.

Remember that high-quality modular metal tiles can last more than 50 years if installation is carried out according to technology, and periodic preventive maintenance is carried out during operation.

Rating of the 7 best metal tiles

The TOP 7 metal tiles include the following models:

MP Cascade;
MP Tramontana-SL NormanMP;
MP Monterrosa-SL NormanMP;
MP Maxi;
MP Supermonterrey (VikingMP® E);
Monterrey MP Monterrosa-SL (VikingMP® E);
Montecristo MP Monterrosa-SL (VikingMP® E).

Let's look at each below.

MP Cascade

This version of metal tiles is distinguished by more strict forms, thanks to which the metal tiles take the shape of a chocolate bar. This relief helps to increase the resistance of the roofing material to loads.

Corrosion resistance	moderate
Width, cm	118
Color fastness	average
Resistance to damage	moderate
Fire hazard	safe
Thickness, mm	0,45
Surface	glossy
Coating	polyester

Price: 360 rubles

metal tile MP Cascade

minimum amount of waste during installation;
polyester coating.

Over time, the glossy surface becomes dull.

I always liked strict geometric shapes, that’s why I chose just such metal tiles. Installation was quick and easy. There is practically no waste left. Now the roof of my house has acquired a modern look.

MP Tramontana-SL NormanMP

The coating has strict lines and an interesting pattern that resembles a chessboard. Metal tiles are completely fireproof, so you don’t have to worry about the roof of your house catching fire.

Coating	polyester
Corrosion resistance	moderate
Width, cm	119,5
Color fastness	average
Resistance to damage	moderate
Fire hazard	safe
Thickness, mm	0,5
Surface	glossy

Price tag: 485 rub.

metal tile MP Tramontana-SL NormanMP

non-flammable;
large width (119.5 centimeters).

If transported incorrectly, it is easy to damage the coating.

I covered the roof of a country house with this material. Now it has become even more pleasant to go to the dacha, because the appearance of the house has completely changed. There was no shame in inviting friends to the dacha for barbecues. In general, now the whole family spends more time outdoors at the dacha.

MP Monterrosa-SL NormanMP

Metal tiles with classic relief in the shape of a wave. Suitable for all types of roofs. It will highlight the style of the house and the entire site.

Width, cm	117
Corrosion resistance	moderate
Resistance to damage	moderate
Fire hazard	safe
Color fastness	average
Surface	matte
Thickness, mm	0,5
Coating	polyester

Cost: 505 rub.

metal tile MP Monterrosa-SL NormanMP

large metal thickness (0.5 mm);
matte coating.

not resistant to corrosion.

The task was to re-roof the house beautifully and inexpensively. This particular metal tile was perfect. A team of workers covered the roof in 3 days and there were very few remains left. I recommend purchasing.

MP Maxi

A coating that combines classic shape and modern design. The main difference of this metal tile is the longer wave pitch, which is 400 mm, and the profile height is 21 mm, which creates an interesting aesthetic effect.

Coating	matte
Surface	VikingMP® E
Thickness, mm	0,5
Fire hazard	safe
Resistance to damage	high
Color fastness	high
Width, cm	119
Corrosion resistance	high

Price: 570 rubles

metal tile MP Maxi

high resistance to damage;
fireproof.

Not suitable for all building styles.

I came across this material when I was re-roofing a kindergarten. The material is very convenient to use, lightweight and practically scratch-resistant, which is very important in modern conditions.

MP Supermonterrey (VikingMP® E)

High quality metal tiles are resistant to damage and corrosion. The thickness of the sheet allows you to increase the strength of the material.

Width, cm	119
Color fastness	high
Resistance to damage	high
Fire hazard	safe
Thickness, mm	0,5
Surface	VikingMP® E
Coating	matte
Corrosion resistance	high

Price tag: 570 rub.

metal tile MP Supermonterrey (VikingMP® E)

wide canvas (119 cm);
matte coating.

not detected.

I started building a house and almost immediately became interested in the issue of roof covering. I researched the information on the Internet and chose this coating. The house looks stylish, bright and eye-catching. After the exterior finishing I think it will be even better.

Monterrey MP Monterrosa-SL (VikingMP® E)

Classic metal tiles are designed to cover all types of roofs. Convenient to use and easy to install.

Color fastness	average
Resistance to damage	moderate
Corrosion resistance	moderate
Width, cm	119
Surface	VikingMP® E
Coating	matte
Fire hazard	safe
Thickness, mm	0,5

Cost: 570 rub.

metal tile Monterrey MP Monterrosa-SL (VikingMP® E)

ease of installation;
Suitable for complex structures.

quickly loses its original color.

I first came across this material during hired work. Covering the roof was easy and convenient. The material is pleasant to work with. I recommend everyone to buy it.

Montecristo MP Monterrosa-SL (VikingMP® E)

Metal tiles imitate classic tiles, which gives buildings a special charm and chic. A wide variety of colors, resistance to mechanical damage and complete fire safety will not leave anyone indifferent.

Resistance to damage	high
Fire hazard	safe
Coating	glossy
Corrosion resistance	high
Width, cm	117
Color fastness	high
Thickness, mm	0,5
Surface	Colorcoat Prisma®

Price: 740 rub.

metal tile Montecristo MP Monterrosa-SL (VikingMP® E)

special coating for color preservation (Colorcoat Prisma®);
glossy finish.

small width (117 cm).

I chose high-quality, strong and durable material to cover the roofs on my site. I decided to do everything in the same style: house, garage, bathhouse, utility room and gazebo. It turned out very beautiful and aesthetically attractive.

Video description

The following video will help you understand the differences between these two structures and appreciate how much simpler the skeleton of a roof trimmed with metal sheet looks:
Thus, steel products clearly take precedence in the simplicity and speed of installation of the under-roof structure. They are better if we consider this design from the point of view of which roof is cheaper: metal tiles or soft roofing. Because the first one requires less materials.

In addition, if you initially wanted to make a metal roof, and then changed your mind in favor of a soft one, nothing will stop you from laying OSB on the finished sheathing. If it is decided to replace the flexible tiles with steel ones, then the sheathing will have to be dismantled and re-attached taking into account the required pitch.

Difficulty in laying the coating

It cannot be said that the installation of both materials is complicated: the technology is simple in both cases.

The metal tiles are laid on the sheathing, aligned with the eaves overhang and screwed with galvanized self-tapping screws with a press washer according to the diagram. It is important to screw the fastener into the groove under the protruding profile step, under which the sheathing board should pass.

Scheme of fastening sheets of metal tiles Source krovlyakrishi.ru

comparison table

Let's compare the tiles presented in the table:

Model	Thickness, mm	Coating	Surface	Width, cm	Price, rub/sq.m
MP Cascade	0,45	polyester	glossy	118	360
MP Tramontana-SL NormanMP	0,5	polyester	glossy	119,5	485
MP Monterrosa-SL NormanMP	0,5	polyester	matte	117	505
MP Maxi	0,5	VikingMP® E	matte	119	570
MP Supermonterrey (VikingMP® E)	0,5	VikingMP® E	matte	119	570
Monterrey MP Monterrosa-SL (VikingMP® E)	0,5	VikingMP® E	matte	119	570
Montecristo MP Monterrosa-SL (VikingMP® E)	0,5	Colorcoat Prisma®	glossy	117	740

Color fastness

The polymer coating of metal tiles is resistant to fading. It practically does not change shade when exposed to sunlight. Polyurethane-based coatings have the highest color fastness. You can safely choose a rich or bright color - and the appearance of the roof will delight you for a long time.

Flexible tiles are also often resistant to fading. The color fastness of the material largely depends on the quality of the granulate. Decorative and protective coating can be made of anthracite, slate, basalt. It is believed that basalt chips are less susceptible to fading.

But granulate has a peculiarity: over time it can crumble (especially under the influence of snow, rain, wind). Because of this, the tiles will lose color, since only the mineral coating gives it a tint. This can also negatively affect the performance of the material - the roof will become more susceptible to external influences.

Conclusion: both materials are colorfast. But flexible tiles may crumble granules - and then their aesthetic and performance qualities will decrease.

Video description

To make it clearer what we are talking about, watch a video about installing a roofing pie for a flexible roof:
Secondly, when installing the sheathing, the installation of a roofing pie for metal tiles ends and the fastening of the covering itself begins. For a flexible roof, another layer of sheet materials is required, and with a slight slope of the slopes, an underlay carpet. If you do not install a rigid solid base, but fix the shingles on the sheathing boards, when humidity and temperature change, they will warp along with the coating, and the coating itself may fall into the cracks between the boards.

Addresses of the best companies by city

To make it easy to find companies selling roofing coverings, we have selected several companies in major cities of our country.

Ufa

KrovStroy . The company sells roofing materials. Address: Ufa, Tramvaynaya, 9, office 225.
Stan . Wide selection of roofing materials. Address: Ufa, st. Ayskaya, 69/2a.

Novorossiysk

LLC "Konstruktiv" A company selling various building materials, including insulation materials. Address: Novorossiysk, st. Gorky, 7.
“Portal” form. The company specializes in roofing materials and provides a huge selection of metal tiles. Address: Novorossiysk, st. 1st Railway Loop, 79.

Rostov-on-Don

LLC "Yugliderstroy" The company sells various roofing materials and fasteners. Address: Rostov-on-Don, Budennovsky Avenue, 3.
Shopping center “World of Repair”. The shopping center carries out wholesale and retail sales of various metal tiles. Address: Rostov-on-Don, Aksaisky Avenue, 21.

Moscow

Stroykomplekt. The company provides a large selection of materials. Address: Moscow, Kashirskoe sh., 70, building 3.
Metalprof. A huge selection of different roofing materials and components for them. Address: Moscow, st. Quarry, 2 p. 10.

Criterion No. 8. Production

The durability and practicality of metal tiles in factory conditions are determined by the following points:

Using high-quality material, where the thickness of steel alone is 0.50 mm, and the zinc content is not lower than 225 g.
The use of a durable coating is better than polyurethane.
Modern equipment in production.
Quality control in accordance with international standards.

It is important whether the manufacturer has its own quality control laboratories, how high-tech equipment it uses, and whether everything complies with GOSTs. In addition to giant companies, manufacturers such as Profil Keskus and Samesor can boast of good equipment today.

Metal tiles are mainly produced by cold rolling. A sheet is simply driven into the machine, and a heavy tool literally squeezes the shape out of it. And this method has many disadvantages, but only large manufacturers engage in hot rolling. We have prepared more detailed information for you in the form of a diagram:

For example, metal tiles are manufactured using a strictly defined technology, where air temperature is important (it affects the flexibility of the material, and, therefore, its integrity after rolling).

Here, for example, is how metal tiles are produced at two large factories in the world:

Another interesting point. Metal tiles are always of worse quality from the manufacturer who also produces sandwich panels at the same time. Why? The fact is that in a sandwich it is important that the insulation adheres well to the metal, and therefore the reverse side of the sheets is treated with epoxy, which is inferior in quality to polyester, but interacts better with glue. That’s why in world practice they don’t like it when someone produces both furniture and cheap used wood at the same time.