Which garage heater is better: a review of 4 options

Choosing a heater for a garage without heating often becomes a serious problem for car enthusiasts who are accustomed to repairing their car in comfortable conditions even during severe frosts. The problem is that there are currently so many offers on the market that choosing a conventional garage heater turns into a lottery for the buyer with an unknown result. Therefore, before going to the store, a car enthusiast should understand the types of heaters, and also learn to calculate the required power of the device in order to choose the best option for his garage from the four most popular modifications presented in this article.

Fan heater - a simple and cheap option ↑

The design of the device is very simple, which ensures its reliability

When heating a garage with electricity, a fan heater is most often chosen. This is due to its mobility (the ability to install anywhere) and low cost. The equipment operates according to the following principle. The spiral or heating elements, which act as a heat exchanger, are heated by electricity. The fan draws air from the room and circulates it between heated elements. The air is heated by heating elements and enters the garage. Typically, a fan heater has two heating stages, which are characterized by power: 1 and 2 kW. The advantages of a fan heater as a method of heating a garage with electricity include:

A large selection of modifications allows you to choose the best option

Cost-effective: low cost of the device.

• Compact, mobile. The device has small dimensions and light weight. You can bring it to the garage with you, rearrange it to any place and turn it on in the desired part of the room.
• Quickly heats up the room. Due to the air forced by the fan, heating occurs faster than, for example, a convector.
• Ease of use.
• If necessary, you can change the heating intensity using the speed switch.
• Automatic operation is achieved by turning off automatically when a certain heating level is reached and turning on when cooling.

This is rightfully the most economical way to heat a garage with electricity, but it has a fan heater and disadvantages that are quite significant:

1. Dries the air. It is not recommended to use for a long time.
2. Due to dust particles getting on the heating elements and burning them, it emits an unpleasant odor.
3. Heats the room unevenly. The temperature will be higher near the device.
4. Produces noise during operation.

Popular brands : Scarlett, Timberk, Polaris. Price : from 1.5 thousand rubles

Heating cables

Laying a heated floor in a garage is not always advisable, but in one situation such a design will be more than justified. We are talking about starting a car in cold weather - often a lot of problems are associated with this, and the presence of a heating cable will significantly simplify the task. In addition, you can lay the cable only under the car and turn it on only if you have problems starting the engine.

The machine must first be covered with a cover that will cover it completely - this will allow the thermal energy to be concentrated in one zone. The air will not move into the garage itself, so the level of heat loss will be minimized. This technique will allow you to quickly warm up the car even in severe frost.

Convector - efficiency and quality ↑

Heating based on the convection principle is most effective in terms of uniform heating

For heating a garage with electricity, a convector will be a reliable and effective option, although not the most economical. The principle of operation is somewhat similar to a fan heater in terms of heating the air that passes through the heated element. But the air moves according to physical laws: cold air comes in from below, heats up and goes up. This movement is called convection, which is what gave the device its name. Its special feature is its protected housing (almost all modern brands), which allows it to be used in rooms with high humidity. It comes in two versions: on legs or for mounting to the wall. Installing it is quite simple: insert two special hook-holders into the wall on which to hang the convector. The devices vary in power level (from 1 kW). For a large garage, two convectors may be required. Among the advantages can be noted:

The convector has a pleasant appearance and is suitable for any type of room

Easy to use and install.

Of course, this is not the most economical method, because a convector is more expensive than other heaters. But the most important thing is that it consumes a lot of electricity, since heating occurs slowly. It will take 30 minutes to reach the optimal temperature. This is not very convenient for a garage; you have to wait until you can work in the room. Popular brands: Atlantic, Polaris, Etalon. Price: from 3 thousand rubles

Heating with electricity requires the installation of high-quality wiring (cable of optimal cross-section).

A convincing guideline is prices

The price of a heater of any type depends on its power, functionality and manufacturer.

To compare different heaters, we will take as mandatory parameters a maximum power of 2.8 kW, the presence of a rheostat for power adjustment and basic safety features that are relevant for using the device in a garage. For electric models, a voltage of 220 Volts is a prerequisite.

Oil heater Termica Comfort 1120 (China). Three levels of power adjustment (2900 W, 1500 W and 1000 W). Overheat and tip-over shut-off function, frost protection. There is a small fan available. Price 3,300 rub.

Electric convector AEG WKL 3003S (China). Maximum power 3 kW. The presence of a thermostat, protection against overheating and capsizing. Floor or wall installation. Price 5,700 rub.

Gas convector Bartolini Calorama FB 4000 (Italy). Maximum power 4 kW. Closed combustion chamber, electric ignition from batteries. Price 12,900 rub.

Electric fan heater Comfort TPK-3000 (Russia). Two levels of power adjustment (3000 W and 1500 W). Ceramic heater, overheat protection. Price 3,700 rubles.

Gas gun Ballu BHG-10 M (China). Maximum heating power 10 kW, power adjustment using a gearbox. Fan power consumption 32 W. Price 4,900 rubles.

Indirect action diesel gun. Maximum heating power 25 kW, fan power consumption 290 W. Thermostat with automatic shutdown support. Price 28,500 rubles.

Infrared heater NeoClima Shaft-3.0 (Greece). Two levels of power adjustment (3000 W and 1500 W). Quartz heating element, thermostat. Wall and floor installation. Price 3,600 rubles.

Before going to the store, you need to carefully study the issue of heating your garage, otherwise there is a high probability of an unsuitable purchase

Heating a garage: the most economical way, what to choose

If the outbuilding is located next to the main building, gas heating is often used. In this case, the heating system can be connected to an existing one in the house.

To heat your garage yourself economically, you can use the heating option using different types of solid fuel raw materials. Which can be used as firewood, peat, coal and diesel products. At the same time, you can save on resources, but it is important to think about the storage of raw materials.

A simple potbelly stove can adequately heat a small room

For your information! A simple solution is a gas convector. In such equipment, heat circulation occurs due to convection. The device is connected to a cylinder, but it will need to be refilled every few days.

Water batteries

This type of heating is very labor-intensive to organize.
Already at the planning stage you will need to think through a lot of details. Indeed, in addition to the heat source, you need a system of pumps and pipes through which hot water will circulate. And this will inevitably entail the purchase of an expansion tank with batteries. In addition, plain water cannot be used. It must contain antifreeze to prevent freezing in winter. Equipping your garage with water heating only makes sense if you plan to spend a lot of time here. Or it is a structural part of a house that already has a central heating system. Then the garage room can be equipped with a water heater for uniform distribution of warm air.

What heating methods are there for a garage?

The most economical way to heat a garage is determined by many factors: availability of fuel raw materials, financial capabilities and distance from the main home.

Heating of the engine shelter can be carried out by the following devices:

Related article:

Diesel fuel heat gun. The advantage of such equipment is mobility. After all, you can simply move them wherever you need. Read the article on how to choose this device correctly and what you should pay attention to.

• infrared heaters;

Such a device does not release harmful combustion products into the air

• electric boiler is suitable for spacious rooms; stationary heaters.

High-quality heating equipment is important to create a favorable environment in the garage.

Advantages of electric heating in a garage

It is recommended to consider heating your garage with electricity as the most economical option. It has the following advantages:

• ease of installation and availability of electricity;
• a wide selection of devices of various types;
• you can choose a device with suitable power;
• rapid heat transfer.

Convectors are used as heating devices

The disadvantages of such equipment include its high cost. Keep in mind that the quality of heating depends on the uninterrupted operation of the electrical network.

You can use these methods:

• heat guns are an inexpensive option; after heating, air masses in them are distributed under the influence of a fan;
• infrared equipment heats surfaces and all kinds of objects, and they provide heat. Infrared rays will not harm the car's paint;
• the convector warms itself up and distributes the heat around. It heats the space worse than a cannon, but the heat lasts for a long time;
• The most expensive options include inverter split systems. They allow you to save electricity.

Electric heat gun models heat compact rooms quickly enough

Helpful information! Thermal models are recommended for small spaces. Fan heaters and heat guns not only warm up, but also help dry the wheels and bottom of the car.

Water heating

If the garage is built close to the main building, then the most economical option is to heat the garage in connection with the main heating system.

In this case, you do not need to install a boiler, but you will need to extend the pipeline. This option will lead to loads and an increase in the amount of fuel. If a separate boiler is used, then full power can be used if necessary, and in other cases the equipment operates at rated level.

Wintering correctly: why park your car in a heated garage

Experienced motorists know that operating vehicles in the cold season has its own characteristics. At sub-zero temperatures, either the engine or the ignition system begins to act up, and a car left overnight on the street is especially capricious. After heavy snowfalls, you have to pick up a shovel to free your car from the snowdrift. Happy owners of a heated garage do not face such difficulties.

Other advantages of a closed, heated box include:

1. The body is reliably protected from precipitation, so it is less susceptible to corrosion;
2. Ability to perform various service and repair work in any weather.

Typically, garages that are closely attached to a house or that are part of a cottage are heated, but it is also possible to create a comfortable microclimate inside structures located at some distance from a residential building. As a rule, they are built solidly: the walls are made of foam blocks, bricks, with a reinforced concrete roof. Steel garages need additional thermal insulation, otherwise heating the box will cost its owner a pretty penny.

How to ensure suitable storage conditions for the car?

The current regulatory documents contain requirements for the arrangement of garages:

1. Indoor temperature - no higher than +5°C;
2. Availability of supply and exhaust ventilation (SNiP “Car Parking”).

First, let's consider the issue of heating your garage.

Review of popular models of garage stoves

There are a variety of options for garage stoves on the markets. They differ in the heating principle and design solutions. Some models deserve special attention:

• The Bullerian stove is made to run on solid fuel. The design has a convection mechanism for high-quality heating of air masses that move through the pipes;
• a durable option is the Stavr stove. It is made of cast iron, a similar material can withstand high temperatures;
• Termafor stoves have convection pipes in their design, which are placed in the combustion chamber. Such models are designed for both standard and pyrolysis combustion;
• The Alaska stove has a stylish design and good heat output. The design is equipped with a hob;
• A cheap alternative to Buleryan is the model of the domestic manufacturer Breneran. It can operate on wood and waste from the manufacturer.

Some stove models are assembled independently

Installation of an industrial curtain for gates

Electric industrial heat curtains can be installed in absolutely any enterprise. The only drawback is the price of the device, because... such a design will consume a lot of electrical energy.

Depending on their location, curtains can be vertical or horizontal. If you decide to install a horizontal type structure, then you need to take into account the length of the curtain and the width of the opening on which it will be installed. The height of the device must be no less than ¾ of the height of the window or door.

By complying with all these installation requirements, you will protect the room as much as possible from cold air currents.

How to make garage heating with your own hands cheaply and quickly: choosing the right place

The location for installing the equipment is selected taking into account fire safety. Heating appliances powered by gas can be used in rooms with excellent ventilation. In addition, it is important to consider the chimney device. The selected device should be attached to the main wall. It is important to correctly calculate the performance of the hood. It is important to provide free access to heating equipment.

Fireplace stoves provide not only high-quality heating, but also an aesthetic appearance

Note! When using hearths with an open fire, do not close the vent until the fuel has completely burned out. You must remember to turn off heating devices for the garage at night.

Using an economical heating method will allow you to fully use the garage at any time of the year.

Rules for operating different types of heaters

So, we have looked at the main types of heating systems for heating in the garage. Now regarding the rules for operating such equipment.

Since the most common option is electric heating systems, let’s figure out how to use them as safely as possible:

• first of all, you should make sure that all electrical wiring is in good condition and the sockets can withstand the voltage of the heating device;
• If the humidity in the room increases, the risk of a short circuit increases, so this issue should be taken seriously and prevent sudden temperature changes in the garage.

Furnace design for heating a garage.
If we are talking about the operation of diesel or gas heaters, then you should pay attention to the following nuances:

• the possibility of gas leakage or gasoline evaporation;
• the need to take enhanced fire safety measures;
• organization of ventilation and removal of combustion products.

Well, the owner himself decides how best to heat the garage. It all depends on the capabilities and goals pursued by the motorist.

Automation

For more convenient control of industrial heat curtains, special automation is attached to them.

This device is designed to solve several problems at once:

1. First of all, the automation starts and pauses the operation of the fans during the opening and closing of the gate.
2. Responsible for changing the temperature of the air flow, taking into account how the temperature conditions change outside and in the building.
3. Starts and stops the air curtain if the outside temperature changes.

By installing automatic gates, you can save a significant amount of money due to the fact that reasonable consumption of electrical energy will be ensured.

Calculation

In order to choose the most optimal option for an industrial thermal curtain for a warehouse, workshop or garage, you should take into account some indicators:

1. The number of openings and the intensity of their operation (meaning how often they open).
2. Check whether cars will stop in the openings.
3. Availability of air conditioning system.

Based on these parameters, certain standards for heating the air at the opening and the temperature of the curtain itself are established.

High-pressure thermal curtain

Before purchasing a specific model of industrial thermal curtain, you need to accurately calculate the system performance. They are identified based on the initial data. This way you can increase your energy efficiency.

Main parameters that should be taken into account when making calculations:

• overall system performance, which is influenced by various factors;
• the speed at which the fan blows air;
• air flow angle;
• opening size;
• heater power;
• coolant power.

In order to make the calculation, there are several special techniques. Using any of them, you will get accurate results. It is necessary to carry out a calculation of an industrial curtain, since even minor inaccuracies in the indicators can affect a large loss of electrical energy.

The table below presents the technical parameters of the air heat curtain based on the size range of models.