Wall-hung toilet: rating, characteristics, reviews and photos

If you decide to decorate the interior of your apartment in a modern style, then, of course, you need to pay attention to the toilet.

The traditional option - with conspicuous pipes and a bulky vessel with a tank standing in the middle - is not quoted today. A modern toilet should be spacious, clean, and there should be nothing unnecessary in it.

Anyone can make it like this today - all you need to do is purchase and install a wall-hung toilet with installation. What kind of device is this, why is it good and how much does it cost - you will find the answer to all these questions in this article.

Floor or hanging: which one to choose?

Despite the seemingly obvious differences (mainly in the installation method), floor-mounted and wall-hung toilets are very similar. Floor-mounted plumbing fixtures are more traditional and familiar to ordinary people, are relatively easy to install and are offered in a wide range of designs and colors. But standard models get boring, so owners of modern apartments often decide to innovate and choose wall-hung toilets.

The wall-hung toilet (including standard) has an unusual design and allows you to visually increase the area of ​​the room due to installation in the wall, which is especially important for small-sized Russian apartments. At the same time, all communications are hidden, convenient access to the surface is provided to maintain cleanliness in the bathroom and good noise insulation (the noise level of the drain and when liquid is collected in the tank is significantly lower compared to standard plumbing models).

Wall-hung toilets are reliable because the fastening system itself provides for the installation of higher-quality components by the manufacturer. For owners of such models of plumbing fixtures, it is much easier than for adherents of standard solutions in bathroom design to install underfloor heating.

But there are several disadvantages that keep apartment owners from buying wall-hung plumbing fixtures. The cost of such a toilet is higher, and installation will also be more expensive, which is difficult to do on your own without the proper experience. Plumbers will figure out how to install a wall-hung toilet, but installation costs will be two to three times higher compared to installing a standard model. In addition, you will have to choose from a small range of models compared to floor solutions.

Conclusions and useful video on the topic

Below we present you a video that gives professional advice on choosing wall-hung toilets:

Wall-hung toilets are a high-quality and comfortable option for modern plumbing fixtures. A correctly selected model will serve you for many years, and its stylish design will positively transform your bathroom or toilet room.

We are waiting for your stories about how you chose, purchased and installed a wall-hung toilet. Please write comments in the block below. Here you can ask questions and share interesting facts.

Types of mounting a wall-hung toilet

Installation is carried out on a special structure in the wall. The strength of the fastening and the reliability of the frame securely fix the drainage system and the toilet itself. Two installation systems are offered: block installation or frame installation. A flush cistern is mounted at the top of the block structure, and a wall-hung toilet at the bottom. This system is suitable for installation in a niche to save useful space. The structure can only be installed on a load-bearing wall.

The frame installation looks a little different. This design can be mounted on a wall, in a corner or on the floor. Floor and wall structures are available for sale. Such models are varied and undemanding in terms of wall strength, so the wall-hung toilet can be mounted almost anywhere. The only drawback of frame installations is the bulkiness and high cost of the system.

Installation stages

The whole process is divided into:

1. Interface of existing communications with newly installed equipment;
2. Fastening the equipment itself.

Regarding the first point , the work is more related to the plumbing profile. At this stage you should ensure:

• proper slope for draining wastewater;
• the ability to connect a flexible connection to the tank;
• matching drain pipe diameters.

The peculiarity of this stage is that in some cases, in order to ensure the required minimum slope of the sewer pipe, it is necessary to sort out the riser so that the inlet hole is as low as possible. This is due to the height of the wall-hung toilet.

There is a generally accepted standard for the height of the toilet seat - 40 cm . In floor-standing toilets, this is the same standard. But hanging systems can be placed at any height to suit your needs. But for convenience, it is better to comply with this standard.

However, if you place a wall-hung toilet at some distance from the drain riser, then there is a high probability that it will not withstand the required slope. For example, for a pipe ø100 mm, the slope should be at least 2 cm per 1 m.

The work of the second paragraph essentially relates to general construction. At this time, it is necessary to fix the frame, if there is a frame installation, or the tank, if the installation is block. All fastening is carried out with scrupulous observance of the vertical and horizontal structure.

After fixation, the installation is hidden behind a partition or walled up in the wall. And on top, on the studs, the toilet is placed and at the same time connected to communications.

The issue of finishing is not included in the scope of installation of a wall-hung toilet.

Dimensions and design solution

Wall-hung toilets (photos will help you decide on the choice of model) are usually offered in three versions: solutions that take up no more than 54 cm after installation, toilets with dimensions from 54 to 60 cm, products with a length of 60-70 cm. A common feature of most plumbing fixtures of this type type: rounded edges. Small toilets are suitable for small spaces, where literally every centimeter of free space counts. As a rule, they are located in the corner of the bathroom, which is more ergonomic. Most buyers opt for medium-sized toilets, which are much more convenient to use, and choose large products for the everyday comfort of people with disabilities.

Roca Dama Senso

The high-quality wall-hung toilet is made from sanitary earthenware. The design itself provides for hidden installation, which is very convenient during installation, and afterward it looks quite stylish. The bowl itself, outside and inside, is covered with a special anti-dirt layer, which makes subsequent maintenance of the toilet easier. The surface was specially created taking into account perfectly smooth walls, because limescale and rust are not deposited on such walls. Anti-splash is one of the best indicators for user comfort. The same function will prevent water from splashing during draining. Toilet dimensions - 36*57 cm.

Pros:

1. High quality durable material and safe;
2. Small sizes;
3. Convenience and comfort;
4. Anti-splash;
5. Presence of a protective anti-dirt layer;
6. Hidden installation.

Minuses:

1. The quality of the toilet's coating against dirt is not very high.

Shape of toilet bowl and drain

The bowl of a wall-hung toilet can be teardrop-shaped, round, rectangular, trapezoidal or triangular. Usually, when choosing, they rely solely on personal preferences, but you also need to take into account the ease of cleaning. How convenient will it be to clean a wall-hung toilet with a triangular bowl? In order not to regret it later, it is better at the repair stage to choose round-shaped models with a gentle slope at the flush.

The drain can be angled or straight. The stream of water in a straight line immediately goes away, but in a circular one it first moves in a spiral, washing the inner surface of the toilet. The second option is considered more economical and therefore more preferable. But there is a more perfect solution - double flush. When you press the button on a wall-hung toilet, a small stream comes out, and if you press a second one, a complete flush occurs. This is convenient and economical, but usually costs more at the stage of purchasing plumbing fixtures.

In addition to the shape, you need to take into account the color of the sanitary ware. The standard solution that will fit perfectly into any interior is a white toilet, but manufacturers offer different colors. In some designs, a black wall-hung toilet looks better, but the bathroom must have good lighting. This model is perfect for black and white interiors. Products with a flush button and a wooden lid are popular.

Conclusion

Now you know what wall-hung toilets are, what advantages and disadvantages they have. But before you go shopping, watch the video in this article. And if some points are not clear to you, ask questions, and I will be happy to answer them.

Did you like the article? Subscribe to our Yandex.Zen channel

September 20, 2021

Toilets and installations

If you want to express gratitude, add a clarification or objection, or ask the author something, add a comment or say thank you!

Materials for manufacturing wall-hung toilets

Most toilets are traditionally made from porcelain or earthenware. Earthenware ones are cheaper, but have a rough surface. Such plumbing fixtures need to be cleaned much more often than porcelain, and abrasive products should not be used when cleaning. At the same time, manufacturers unreasonably inflate the cost of earthenware toilets, believing that for some reason they are better than porcelain ones.

Porcelain is a very durable material that can last up to fifty years. With proper care, faience will retain its excellent appearance for approximately thirty-five years. The material that is coated with a special high-quality glaze is more durable. Porcelain sanitary ware is easy to clean and does not absorb unpleasant odors.

Recently, plumbing fixtures made of stainless steel, plastic, glass or polymer concrete have appeared on sale. But not everyone is ready to install a transparent toilet at home, which requires complex care, because any dirt and stains will be very noticeable. Polymer concrete models are very expensive, so they are usually not suitable for city apartments, while stainless steel products are more suitable for a public toilet because they are inconvenient.

Advantages of the new design

Not only the best models of rimless toilets, but also the most common plumbing fixtures with new technology have many advantages over the old design. The most important advantage is ease of maintenance. The owner does not need to use an additional brush or chemicals. It is enough to rub the surface with a cloth with soapy water or a damp cloth with a disinfecting effect.

Other advantages follow from this:

1. Reducing the cost of purchasing detergents. Now the cost of using them is significantly reduced; it is enough to clean the bowl 2-3 times less often.
2. Reduced time consumption. Cleaning takes less effort, and you can pay more attention to your own interests.
3. Long service life of plumbing fixtures. A few years after the start of use, the products do not begin to emit an unpleasant odor, do not become covered with rusty stains or yellow bacterial deposits that cannot be cleaned off.

Although it was initially believed that the rim allowed better distribution of water flows, after the invention of the rimless system it was discovered that in the new generation of products, on the contrary, the washing of the bowl occurs more evenly. In the old design, only the area under the tank was fully washed. In the new one, the entire perimeter comes under running water.

Another important advantage of the modern type of toilet is water saving. For the best models of rimless toilets, it is about 30% with each flush. This leads to a reduction in money spent on housing and communal services, as well as a reduction in noise when flushing.

Functionality of the plumbing device

When choosing a wall-hung toilet model, you should pay attention to the functionality of the device, because many manufacturers offer interesting add-ons. Some solutions are equipped with the functions of a hairdryer, air deodorization, a built-in bidet, and so on. There are wall-hung toilets with lids that do not slam when lowered or lower gently on their own (microlift); seat heating is often built into the toilet seats. The most advanced models from Japan can even inform the owner about the state of health when flushing water. It should be borne in mind that the presence of additional functions can significantly increase the cost of the product.

Important parts: cover and button

When choosing a toilet model, it is advisable to pay attention to the lid, which can be:

• traditional;
• having an automatic device that can lift the lid in a split second;
• equipped with a microlift system that ensures smooth lowering.

The latter function is useful in that it prevents mechanical damage to the lid when closing the toilet abruptly. Additionally, an antibacterial coating can be applied to the lid and seat to prevent the development of microorganisms.

A small but important detail is the flush button. It can be single or double, if different tank drain systems are provided (full and half, allowing you to save water).

Since the button is the only part of the fitting that is visible, manufacturers attach great importance to the design of this part. You can find buttons that have a wide range of colors: from traditional white to richly bright, from neutral to pearlescent metallic.

The flush button is a small but important element included with the wall-hung toilet. It has both functional and aesthetic significance

The large size of the buttons is due to the fact that an inspection window is hidden under them, allowing you to monitor and adjust the functioning of the shut-off valve and other fittings.

The best toilet manufacturers

Which wall-hung toilet is better? A high-quality model can also be chosen in a budget price category. Chinese products and toilets from several Russian companies cost up to 15 thousand rubles. As a rule, these are earthenware plumbing fixtures, which do not feature additional functions or stylish design solutions. In the range from 10-15 to 30 thousand rubles, you can choose products from Eastern European brands. Most of these are high-quality toilets that look stylish and last a long time. German and Italian plumbing falls into the price category of 30 thousand rubles. Some of these models are created by famous designers. It's not always practical, but it's very beautiful.

Among Russian brands, you can choose Stroyfarfor. The Lublin and Vorotyn factories offer good products. Such models are inexpensive and good quality. The Czech company Jika offers budget but high-quality equipment. Models from Bulgarian and Turkish brands (for example, Santek and Vitra), and Chinese toilets have a good price-quality ratio. Among European manufacturers, we can highlight the Polish company Cersanit (detailed description below), the Italian Dolomite and the Swiss Ideal Standart. High-quality and stylish wall-hung toilets from the Finnish brand IDO and Italian Roca are in demand. The premium class is represented by Italian Ceramica Globo and Catalano, as well as American Kohler sanitary ware. These models are unrivaled, but much more expensive than other solutions.

Owner reviews

To prevent you from suspecting us of bias, we suggest that you read reviews from owners of rimless toilets. Perhaps this will be a decisive argument in favor of one model or another.

Karina. “When we bought a Jacob Delafon toilet, at first I couldn’t be happier. When the passions subsided, I began to notice one drawback - it is not very convenient to wash the top of the bowl. True, it practically doesn’t get dirty, so you don’t have to do this often.”

Vladislav. “I was looking for a suitable toilet without a rim for a long time, and settled on the Ifo Rimfree model. I was captivated by its beautiful appearance and reliable design with a cast flow divider. The toilet has been in use for two years and during this time I have never regretted my choice - it flushes powerfully, consumes little, and requires very minimal maintenance.”

Auntie. “When we bought a toilet, I chose it based on appearance and convenience. Lol only found out that we had such state-of-the-art plumbing fixtures two months later, when my husband’s brother showed up and asked: “Did you buy a rimless toilet? And only then did I start to take a closer look at how cleanly it rinses off. I clean it once a week as before, but it really has become easier to wash the inside of the bowl. The toilet is really cool, I recommend it. It's called VitrA S50."

Nata. “We bought the vaunted Roca The Gap. Well what can I say? A toilet is like a toilet – you still need to wash it periodically.”

Avpopov. “At the moment I am the owner of Keramag Renova v.1 203050000. I am happy as an elephant. The casting is perfect, the glaze is everywhere. The sound is ringing. The surface is slippery. There is no rim at all. There is no splashing. It washes off powerfully, but of course, it doesn’t wash the entire front wall. The seat was installed from AM-PM with a microlift.”

Oleg Peskishev. “Cersanit Carina: the bowl is flat, when you relieve yourself, the splashes from the surface bounce off onto your feet. When you sit on it (on the bowl), your belongings lie in it, if you want to wash them, press the drain. There is no enamel on the inner surfaces of the pot itself, but only some fragments. But the main drawback is the splashes flying onto the floor during draining. I believe that the technology for producing rimless toilets is still imperfect. I recommend choosing a toilet with a rim and a deep bowl.”

Anna. “We bought a rimless toilet from Cercanit - we’re not happy with the product, it doesn’t flush well, the water doesn’t cover the required area for flushing, water from the toilet splashes on the walls and floor.”

Of course, no one can conduct a complete analysis of owner reviews. A small study we conducted revealed almost equal numbers of supporters and opponents of rimless toilets. However, the fact that consumers who are dissatisfied with the quality of products unsubscribe online much more often allows us to declare the success of the Rimless technology.

Rimless toilets are rapidly gaining ground over traditional models. And although many new products are not yet free from childhood diseases, the time is not far off when Rimless technology will completely replace the outdated classics. Now we can only advise one thing - in order not to be disappointed in your choice, you should not save money - the market is full of reliable, proven solutions from first-tier manufacturers.

Wall hung toilets Roca (Spain)

Roca wall-hung faience sanitary ware is very popular. The design is usually strict, which looks great in modern, laconic interiors. Bowls can be found round or square, lids are available with a microlift or standard. The W+W and Khroma models attract attention. In the first case, the open tank can be used as a sink, so its design is more complex. Instead of a lid, there is a washbasin bowl, and inside there is a separate drain for the sink and the toilet itself. The tank is replenished with water used when washing hands. This is a great option for miniature bathrooms.

The wall-hung Italian Khroma toilet has a round shape and comes complete with a red lid (microlift system). Many buyers pay attention to this model because of its unusual and bright colors. The dimensions of plumbing fixtures are different: length can be from 35.5 to 86 cm, width 50-70 cm, height - 39.5-76 cm. The optimal option can be found for every taste, bathroom design and room size. The Roca lineup is represented by both cheap models (up to 4 thousand) and more expensive products (20 thousand rubles or more).

To take or not to take?

A wall-hung toilet is a relatively new type of plumbing fixtures for bathrooms, which appeared in the West in the late 80s of the 20th century. It differs from traditional floor-standing models in that it is installed on the wall using a metal installation frame. This design has several advantages:

• The space under the toilet can be used to install a heating system and decorative flooring. There are also fewer problems with cleaning the room.
• All communications and the tank are hidden behind a false panel, which has a positive effect on the overall design of the bathroom.
• Wall-hung toilets allow you to visually “lighten” the interior, making it lighter and more spacious. There is also more opportunity to experiment with the layout of the toilet.

Of course, such plumbing has its drawbacks - and in some cases they become critical:

• Wall-hung toilets cost a lot. Compared to floor-standing ones, all other things being equal (material, quality of production, etc.), their price is at least three times higher.
• Installation of the installation requires professional skills, so you cannot do without the services of an installer. Which further increases the cost of a wall-hung toilet.
• To install an installation with a tank, an average of 12 cm of additional space is required. For small bathrooms this is not always acceptable. However, in the vast majority of toilets on the market, this nuance is compensated by the compact size of the bowls themselves.

Users who have not previously had experience using a wall-hung toilet often fear that it will not support the weight of an adult or will quickly become loose with frequent use. In fact, even cheap models can easily tolerate a load of 400 kg. Of course, there is the possibility of poor-quality installation, which reduces the strength of the fasteners, but this is no longer a problem with the plumbing itself, but with the competence of the installer.

Criterias of choice

If, after comparing all the pros and cons of wall-hung toilets, you decide that the former outweigh the former, then you can proceed directly to the aspects of choosing this plumbing fixture.

Material

. What the bowl of a wall-hung toilet is made of affects its hygiene, ease of maintenance, cost and aesthetics.

• Ceramics
  . Models made from it are the most common, which is dictated by their relatively affordable price, practicality, varied and aesthetic design. Products made from earthenware cost less, but this material is quite porous, which makes it more difficult to clean from organic contaminants, rust, and lime. More expensive porcelain is denser, so dirt can be easily removed from its smooth surface.
• Stainless steel
  . Basically, toilets made of this material are installed in public toilets - metal cannot be damaged, while ceramics often become victims of vandals. Stainless steel is also resistant to corrosion and is easy to clean from any contaminants. The disadvantages of such plumbing include an even higher cost than porcelain, greater weight and a specific appearance.

Rarely, there are wall-hung toilets (usually experimental design models) made from other materials. However, they were not widely used due to their shortcomings. For example, cast stone toilets are expensive and don't hold up well to acidic cleaners, plastic ones scratch easily, and glass ones are fragile and don't look very good after use.

Form

. This criterion also has not only aesthetic, but also practical significance. The most common forms of wall-hung toilets are:

• rectangular
  - despite all the unusualness and stylistic appeal of this shape, its drawback lies in the corners that you can hit (especially in a cramped bathroom);
• round (oval)
  - the most common form of wall-hung toilets, less traumatic and easier to clean due to the absence of corners.

There are other configuration options for wall-hung toilets, including quite complex ones. However, they are represented on the market by a small number of models due to their low practicality. On the other hand, with the availability of modern household cleaning products, caring for even complex-shaped plumbing equipment is not difficult.

Color

. The vast majority of wall-hung toilets are white. This is due to universal compatibility with other shades, as well as better visibility of dirt on the surface and, therefore, greater hygiene. However, there are models in other colors: red, black, gray, gold. The choice between them is generally a matter of purely aesthetic preferences of the buyer.

Inner bowl shape

. In addition to the external configuration, the convenience and hygiene of the plumbing is influenced by the design of the internal surface. There are 3 main forms:

• disc-shaped
  - characterized by the presence of a horizontal platform, which prevents the scattering of splashes, but makes it difficult to remove waste;
• funnel-shaped
  - due to the location of the drain hole exactly in the center, it guarantees unhindered removal of excrement, but does not protect the user from splashes;
• visor
  - has a gentle slope with a visor, which allows you to effectively wash away waste and prevent splashes from flying away.

Bowls of the latter type are today recognized as the most hygienic. However, for the most comfortable use of plumbing fixtures, you will in any case need a brush.

Flush direction

. Determines the efficiency of solid and liquid waste removal. The standard is a direct (horizontal) flush, in which water is supplied in one direction. Today, more hygienic models of circular flush toilets are available - in them, the liquid washes the bowl in a spiral, better removing waste.

Presence of a rim

. This element is a protrusion on the inner edge of the toilet bowl, designed to direct the flush stream over the entire surface of the bowl. However, this design has a significant drawback - dirt, rust and lime accumulate under the rim. An alternative is rimless models, in which the direction of water flow is set by a gutter, which does not greatly interfere with the care of plumbing fixtures.

Flush mechanism

. The efficiency of waste removal, as well as saving water consumption, depends on this criterion. At the moment, wall-hung toilets are equipped with the following systems:

• single-button
  - when you press a button, it completely empties the tank, today it is considered uneconomical and is gradually being replaced;
• two-button
  - in it one button empties the tank completely, the other half, which allows you to reduce water consumption depending on the amount of waste;
• drain/stop
  - in it, the flow of liquid from the tank is stopped by pressing the button again, which also helps to save water.

Wall-hung toilets also differ in the type of cistern drive. Mechanical (lever, cable) is simpler and more reliable, but pneumatic systems transmit force better and provide precise flush adjustment.

Additional functions

. Depending on the model, price and manufacturer, toilets may have options that increase comfort, hygiene or efficiency of their use:

• microlift
  - ensures smooth lowering of the lid onto the seat without damage or loud knocking;
• heated seat
  - prevents unpleasant sensations when the body touches the seat surface;
• bidet
  - is a spout installed in a bowl (often retractable), providing convenient washing;
• diagnostic system
  - an electronic unit that analyzes discharge for the presence of blood inclusions, infections and other symptoms of problems with the body.

Other additional functions that wall-hung toilets are equipped with include a hair dryer, deodorizer, disinfector, etc. The presence and number of such options directly affects the cost of plumbing fixtures - this must be taken into account when purchasing, especially if you do not need some of these features .

German quality Villeroy Boch

Judging by the reviews, German toilets are no worse than Italian ones, but have a more varied design. There are plumbing fixtures in a minimalist style, miniature wall-hung toilets, and high-tech options. Semicircular toilet bowls of a respectable size are made in a classic style (Hommage model, for example). The sanitary ware is made of porcelain, the lids in most models have a micro-lift function or quick removal technology to make it more convenient to wash the bowl. The cheapest medium-sized model will cost about 6 thousand rubles, the most expensive toilets - about 55 thousand.

Ghore installation systems

The German brand Ghore does not produce wall-hung toilets, but installation systems. Sometimes you can find such a design on sale together with a toilet, which is much more economical in cost than buying the devices separately. Installations are sold with two buttons (for a strong flush and a weak one), a “start/stop” system (when you press the “start” button, water flows, the “stop” button stops), and continuous flushing. The materials used are simple: plastic (not counting frames and fastenings), earthenware. The systems are made at factories not in Germany itself, but at a subsidiary in Turkey. The cost of installation ranges from 8 thousand rubles (block) to 25 thousand.

Advantages

The positive aspects of wall-hung toilets include:

• stylish, harmonizes perfectly with various design options for the bathroom and toilet;
• all communication systems are hidden in the false panel, which makes them invisible;
• there is no leg, which facilitates better cleaning under the bowl, and also maintains hygiene in the bathroom;
• occupy less space than floor-standing devices;
• contribute to the visual enlargement of the room;
• water is saved due to the presence of a half-water drain mechanism;
• have an additional layer of insulation, so they are practically silent;
• strength, reliability, durability;
• suspended above the floor, they make it possible to beautifully and fully lay the floor covering.

Flaws:

• significant cost. Different models have different prices, but they are still more expensive than their floor-standing counterparts;
• Difficulties arise during installation. When installing such systems, experience, dexterity, and special knowledge are required, so entrust this work to a professional;
• a false panel that hides the installation can become an obstacle to building-wide communication systems. In this case, the finishing material is removed, the partition is dismantled and the damage is repaired.

Wall-hung toilets Cersanit (Poland)

Cersanit produces both wall-hung toilets and installations. Most of the products are shaped like regular floor-standing sanitary ware, made of faience, and the seats are made of high-quality duroplast; there are no additional functions. Only the most common sizes of wall-hung toilets are offered: for example, the Delfi model has dimensions of 52 x 36 x 7.5 cm (length x width x height). These are economical solutions: all the shortcomings of Cersanit toilets are compensated by the low cost of plumbing. A good Polish wall-hung toilet without an installation system and fastenings can be bought for 3 thousand rubles.

Budget models of the Austrian brand

The Laufen Pro toilet turned out to be popular in Russia, which can be purchased in some stores for 5 thousand rubles. In general, the cost of Austrian plumbing does not fall below 10 thousand rubles, and the norm is 15-25 thousand. The Laufen brand produces earthenware toilets with a lid equipped with a microlift and with an antibacterial coating. There are a variety of sizes and shapes available: you can find toilet bowls in the shape of a teardrop, a duck, a perfect rectangle or an inverted pyramid; there are always classics.

Rating of wall-hung toilets: budget models

How to choose reliable plumbing fixtures, given the variety of models on the market? Which wall-hung toilet is the best? In this matter, you need to focus on several parameters, but most often you have to choose based primarily on cost. For the most part, inexpensive models are in demand. Here are some of the best wall hung toilets:

1. The leader in the ranking is a multifunctional and inexpensive solution from the Italian brand Roca - the Victoria model. For little money (about 5.5 thousand rubles), the buyer receives a standard solution with the most important options. The toilet has an antibacterial coating, which helps maintain hygiene. The built-in anti-splash feature will prevent constant splashes of water on the floor and rim. The sanitary ware is made of high-strength snow-white faience. The structure is wall-mounted, the tank and all communications are hidden in the wall. The lid is included, but the tank will have to be purchased separately.
2. The Jika Mio toilet (pictured below) costs a little more than 6 thousand rubles. The model is equipped with an anti-splash and micro-lift, which protects the surface from impacts, and has an anti-dirt coating. The classic shape harmonizes well with any interior, and the acceptable dimensions and convenient shape create conditions for comfortable use. The model can withstand up to 500 kg of weight, because the design is very reliable. Jika Mio is a good alternative to more expensive plumbing fixtures.

3. The last line in the rating of wall-hung toilets in the budget segment is occupied by the Gustavsberg Nordic model. Judging by numerous reviews, this is a decent “mid-range” product that combines quality workmanship, relatively low cost (about 6.5 thousand rubles) and the necessary functionality. Among the shortcomings, buyers note only the minimum configuration - you will have to pay extra for the tank and lid. The toilet is made of high-strength snow-white porcelain and has compact dimensions that allow this model to be placed even in a very small room. The rounded shape will prevent accidental injury during operation.

What is the device

Based on the name, it is clear that the toilet is located above the floor, having a suspended appearance, as if floating above the surface. They look smaller; nothing is visible except the bowl. You might think that the structure is attached directly to the wall, but this is not the case. The cistern and all auxiliary elements are hidden behind the wall and mounted on a metal frame, which is called an installation. It is sheathed with finishing material, creating a false wall. The toilet bowl itself is attached to it.

This design has its pros and cons.

Strengths of installing this plumbing fixture:

• It has a modern look and fits harmoniously into any bathroom interior.
• It looks neat, since all communications are hidden behind the panel.
• Makes cleaning easier. The absence of legs allows you to quickly clean under the bowl.
• The absence of a barrier on the floor allows you to easily insulate the floor and lay tiles.
• Visually increases the space in the room. The main thing to remember is that the installation will also take up space. From the wall it will be 13-16 cm, height up to 120 cm.
• The movement of water is heard less.
• Reliable design can withstand weight up to 400 kg.

Negative points are also present:

• Hanging models have a higher price.
• Not suitable for small rooms, as an additional niche for installation takes up space.
• Difficult to install. It is necessary to correctly and securely install the metal frame and cover everything with material.
• If communications are damaged, the false wall will have to be dismantled.

The best mid-range and premium toilets

More expensive models usually differ only in additional functions and a greater variety of design solutions. But there are also unsuccessful models for which you should not overpay. Which mid-range and premium-class toilets deserve attention? The rating of wall-hung toilets includes the following models:

1. The suspended model O.novo from the Villeroy Boch brand stands out among similar products with its low cost (12.5 thousand rubles) and a wide range of equipment. The delivery set includes a bowl, a lid with a micro-lift system and a set of metal fasteners. The flush key and mounting system are purchased separately. The dimensions are standard, the height of the wall-hung toilet is adjustable according to the preferences of the owners. Porcelain is coated with a special glaze, which prevents rapid contamination and ensures maximum hygiene of plumbing fixtures.
2. Jacob Delafon Odeon Up has the best price (9 thousand rubles) among similar products. The toilet is designed in such a way as to provide quick and convenient access to all internal areas of the structure. There is no rim inside, so keeping the plumbing clean is very easy. Complete cleaning of the bowl is facilitated by effective drainage and two additional water sprays located on the sides. The dimensions are standard, the design is classic, and the flush is designed to save water.
3. The Connect wall-hung toilet from the German brand Ideal Standart (pictured below) is distinguished by smooth lines and small dimensions, thanks to which it fits perfectly into the design of any toilet room. This solution provides high-quality rinsing and is equipped with a “hygienic shower” function. Reviews about the product are only positive. Connect is considered the best wall-hung toilet in the mid-price segment. Other benefits: lifetime warranty, ease of maintenance, functionality and quality workmanship. The German brand is able to satisfy the needs of the most picky customers.

Characteristics that you should pay attention to when choosing plumbing fixtures

Before purchasing a product, you need to study its characteristics. If you order from an online store, then not only take into account the parameters and functions, but also pay attention to customer reviews. So, let's look at the main criteria for a wall-hung toilet.

Material type and color

In the manufacture of the device, different materials are used, which affect the durability of the product.

• Porcelain. A common type, strong, durable. The surface of the product is smooth, which makes it easy to care for. Sanitary porcelain is made from white clay with the addition of quartz and feldspar. Enamel and glaze are applied on top.
• Faience. Just like a porcelain product, the main composition is clay, but its percentage in this case is higher. This makes the thing more vulnerable, but the price will be cheaper. The surface is rough and requires frequent cleaning. Sanitaryware is an object covered with glaze on top. The surface is smoother, more comfortable to use, and easy to clean.
• Stainless steel. Robust, long lasting and require minimal maintenance. However, the appearance is associated with a public place.
• Plastic. Practical, inexpensive, easy to care for. It must be installed in heated rooms, a good option for a summer cottage. The downside is that they cannot withstand loads and are susceptible to damage.
• Glass. Unusual in appearance, but not a common option. Any contamination is noticeable.
• Fake diamond. They look impressive, are reliable and durable. The smooth surface is easy to clean. Expensive.

A universal and common color option is white. It suits any interior style. Manufacturers also offer other color solutions that will highlight the originality of the room. Toilet bowls with a printed pattern or ornament will look unusual. If preference is still given to the classic white color, then an original solution would be a colored lid or lighting of the plumbing fixtures.

Shape and size

The design of wall-hung sanitary ware is varied. As for the shape, the standard and practical ones are oval and round. They do not have sharp corners; cleaning such devices will not cause any difficulties. There are rectangular, square, drop-shaped and egg-shaped.

As for the bottom of the bowl, it is divided into the following shapes:

1. Visor is a common convenient option. There is a ledge in front of the drain; when drained, sewage quickly ends up in the sewer.
2. Funnel-shaped - the drain hole is located in the center of the bowl. Hygienic option, easy to clean, water is used sparingly.
3. Plate - sewage first falls into the recess of the product, and it takes a lot of water to wash it off. Models with this type are inexpensive.

When choosing, the dimensions of the product are taken into account. They are divided into the following types:

• Small size – length up to 54 cm, suitable for small bathrooms.
• Medium - 54-60 cm in length is considered standard, common among buyers.
• Large - from 60 to 70 cm, used in spacious rooms. Suitable for older people, large people or people with disabilities.

The installation height is usually 40-45 cm, while the legs should be free on the floor, not hanging down and without tension.

Drain type

Hanging devices differ in the type of drain.

1. Horizontal or straight. A simple method where water is supplied from behind the bowl. With high water pressure, sewage is washed into the sewer through the central parts of the device. This is characterized by the appearance of splashes.
2. Circular or reverse. Water is supplied from several holes located at an angle around the bowl. Flows down in a spiral, washing the entire circumference. Water is used more economically and the process occurs without splashing.
3. Rimless – directional flush in a bowl without a rim.

Economical water consumption is ensured by a dual flush button. It consists of two parts of different sizes. When you press the larger part, the water drains completely, and the small one limits the amount of liquid drained.

There are models with touch sensors that are activated after lifting the lid, and the water is drained automatically when a person leaves the range of the infrared device.

Additional options

Modern wall-hung sanitary ware is equipped with a variety of additional functions.

• “Anti-splash” - the system shifts the center of the drain hole, which prevents the formation of splashes;
• Anti-dirt, antibacterial coating - a special glaze on top that prevents the formation of plaque, rust, harmful microorganisms do not multiply;
• Heated seats for more comfortable use, it is possible to adjust the temperature;
• Aeration – the water is saturated with air bubbles, which saves water and reduces noise during draining;
• A seat with a lid with a micro-lift system, which allows it to be smoothly lowered onto the bowl;
• Availability of a nozzle for water supply;
• Hairdryer function to quickly dry the skin;
• Touch control, control via remote control.

Smaller sizes are available for children. They can be decorated with bright colors and patterns. For convenience and comfort in accustoming a child to the toilet, they are equipped with heating and an anti-splash system.

For the elderly and people with disabilities, folding handrails are provided, or you can buy a special seat pad that will increase the height to 20 cm.

The best wall-hung toilets with installation

The universal design, which is attached to the wall or floor, provides quick access to all mechanisms in case of urgent repairs. Buying a wall-hung toilet immediately with installation is not only more profitable in terms of the final cost, but also much more convenient than searching for elements separately. The rating of wall-hung toilets that are sold complete with an installation system includes the following models:

1. Cersanit Delfi + Leon New. The price (10.5 thousand rubles) includes a bowl, a tank, a flush button and a lid. All that remains is to install the toilet. A useful design feature that many buyers note is a powerful flush. This is one of the main advantages of the model, which ensures hygienic cleanliness. Water is drawn into the tank silently. The toilet has standard dimensions, is made of white sanitary ware, and comes with a frame that allows you to adjust the height.
2. Vitra S50. The complete package (16.7 thousand rubles) includes a bowl, installation, lid with microlift, and button. There is a double flush, there is an anti-dirt coating, the toilet has an oval shape and compact dimensions, and is made of durable earthenware. The design has built-in protection against splashing water, so you don’t have to worry about drops appearing on the floor or the outer rim of the toilet.
3. Grohe Solido. The model comes with a double button, which allows you to save water if necessary. The wall-hung toilet lid is equipped with myrcolift and protects the surface from damage. The model is made of white porcelain, the inner surface is treated with a special coating that prevents the formation of persistent stains.

As you can see, most wall-hung toilets in the rating have similar functionality. Models differ in cost, quality and durability, as well as in design solutions. When choosing, you need to take into account the dimensions of the plumbing fixtures, functions, cost and other factors, but in general you should focus on your own preferences.

Flaws

As usual, such devices also have undesirable features:

1. High price. A toilet with installation costs at least twice as much as a “compact” with the same characteristics.
2. Difficulty in installation and repair. If the drain mechanism breaks down, you will most likely have to call a technician.
3. As already mentioned, due to the hidden installation, leaks may be detected with some delay.

Residents of apartment buildings should be aware that utility workers may resist the idea of ​​covering risers with plasterboard, since this limits access to them. A case is described on the Internet when a management company sued residents for hiding pipes in boxes. The court found the residents’ actions unlawful, since communications are the property of utility services and access to them must remain open.

Thus, it is recommended that before purchasing a toilet with installation, you agree on its installation with the management company.