The comfort and quality of our life are ensured, among other things, by many familiar little things. These also include such a mandatory attribute of toilets or bathrooms combined with a bathroom as a toilet paper holder. They come in two types: wall-mounted and floor-mounted.
The first have several varieties:
- Closed type holders
, in which a special container with a lid is provided for a roll of paper, or at least the roll placed on the hook of the holder is covered on top with a lid that protects it from the settling of dust or moisture particles, if the device is installed in a combined bathroom. The paper in such holders is completely or partially covered; you can unwind the required amount by pulling the protruding end of the tape. - Open holders
are the simplest devices - hooks or mini-bars on which a paper roll is mounted. This is better than nothing: the paper is always in the right place, at hand. But such simple and cheap holders are gradually being replaced by more functional and aesthetically pleasing devices. - The holders are built-in
- they are not mounted on the surface of the walls, but are placed in a niche specially provided for this purpose. Such a niche is provided for in the design project and equipped while carrying out repair work, accurately calculating the dimensions for the specific holder planned for installation. A container with a roll of paper is built into such a niche; only the tip of the tape protrudes from the wall. When the paper holder runs out, the container hidden behind the decorative trim is pulled out from the wall and a new roll is placed in it. - Wall holders-racks
of horizontal or vertical design. Vertical racks are most in demand - they are more compact, which is very important, because often the room of a toilet or combined bathroom in city apartments is not very spacious and you have to look for optimal solutions for the rational use of space. But horizontal racks with a spectacular design have also gained popularity among Russian consumers due to their versatility and versatility of use. Such racks have different designs; some models have a special basket for storing spare rolls, a stand for a sanitary brush, a shelf where you can place detergents and other small items. - Mobile holders
mounted on walls using quick-release fasteners. Among such devices you can find closed-type models, but for the most part they are still open holders of a simple design, as light as possible so that the quick-release fasteners can withstand the load. An example of such holders are models with suction cups, which are easily attached to a flat, smooth surface and can be quickly moved to a new location. The disadvantage of holders of this type is the unreliability of fasteners. The suction cups often come off, unable to withstand the load, and the paper ends up on the floor. And the appearance of such holders is not very presentable.
Happy owners of spacious bathrooms and bathrooms combined with them can use floor-mounted toilet paper holders. Their use is especially important in cases where, for one reason or another, it is impossible to hang the holder on the wall. The floor-standing version of such a device can be installed in any chosen place, and toilet paper will always be at hand.
Closed paper holder PORTOFINO, antique brass
Floor holders come in standard and multifunctional types. In the first case, they are a rack with a threaded roll of paper. But few people prefer this option due to the fact that the stand takes up a lot of space, performing one single function. It is rarely used, since even a very beautiful stand topped with paper looks awkward and takes up too much space. It is much more rational to install a multifunctional floor stand in a combined bathroom, which has a container for spare rolls of paper, shelves for placing household chemicals and sanitary equipment. Such a floor holder can replace several shelves that clutter the surface of the walls. The floor stand is not fixed to the floor, so it is easy to move and clean.
Types of paper holders
Open vs closed
Open devices usually come in the form of a pin, hook, or mini-bar.
The bar is equipped with a plug on one or both edges, which prevents the roll from falling.
There are more intricate options.
The simplicity of the open design makes it cheap. But devices without a cover are not very convenient. More precisely, they are not suitable for combined bathrooms and public toilets. Such models are gradually being replaced by more functional and aesthetic analogues.
The roll can be covered completely or partially. This option allows you to protect toilet paper from dust, dirt, moisture and splashes , contact with dirty hands. It also makes it easier to feed material and control its consumption. Only the roll must be inserted with the correct side, otherwise the cover will not perform its function (hold the tape).
A type of holder closed on all sides a dispenser. It is a roll storage container with a movable lid. Only the tip of the tape remains outside, by pulling which you can unwind the required amount of material. The serrated edge of the dispenser row opening makes the tearing process easier.
For roll without core
If you use paper without a core, you can buy a special dispenser to store it (the characteristics indicate the diameter of the roll opening - 0 mm) or sew a bag with your own hands from fabric. Another solution for such a roll is a hanging basket:
Type of allocation
Floor and wall models are available for sale. In the first case, the roll is fixed on a vertical or horizontal stand. Floor-standing models are usually made multifunctional.
The main advantage of the stand is its ability to move freely. Many models can accommodate two or more rolls. The floor structure can be cleaned in the dishwasher. The disadvantage of stands is that they take up quite a lot of space .
A wall holder is the most common paper storage option today.
This type can be attached to a vertical surface or recessed into it. This model can be mounted on the wall in any convenient place. The method of fastening this element may be different.
The most unusual and cool holder
The most non-standard paper holder is in the style of a certain object, for example, a Polaroid camera, an animal or a movie character. The Polaroll camera holder looks creative The body of the item completely replicates the design of an old Polaroid camera.
Inside the device there is a special crossbar that secures the sleeve. The paper comes out through a hole that releases the pictures. The holder is made of high quality plastic. Installed on special holes located at the back of the device. The price of the miracle technology reaches 1,500 rubles.
pros
- Creative Corps.
- The presence of nicks that tear off the paper.
Minuses
- No.
My bathtub is created in pop art style. It has many futuristic items that make the room unique. I added a Polaroid paper holder to the design. Cool and unusual item. I fell in love with him.
Mounting wall models
With floor holders everything is simple - they are placed on the floor. But the models differ in the type of fastening.
Self-adhesive holder
The area adjacent to the wall is covered with glue. Option for smooth surfaces. Provides relatively weak joint strength. Not suitable for bathrooms with high traffic due to unreliable fastening on some models. The fixing properties of the adhesive may be weakened by moisture and steam. Therefore, the strength of the connecting material of Velcro models is of great importance.
On vacuum suction cups
Option for perfectly smooth walls ; rough mounting surfaces require the use of fasteners.
Also unsuitable for frequently visited bathrooms. It may not withstand heavy loads - the weight of the roll or the pressure when unwinding it. Most often these are open and maximally lightweight structures. Suction cups allow you to quickly remove the product to rehang it or clean it from dirt.
Screw-on
The structure is held stably using screws/screws and dowels. Very reliable mounting option. Installing such devices takes a lot of time and effort. Traces remain after removal. If you don't plan to remove or move the holder, the drilled holes shouldn't be a problem.
There are models that can rotate 360 degrees:
Built-in (recessed)
It is placed in the niche provided for by the design project, which is equipped at the stage of repair work.
In this case, it is necessary to accurately calculate the dimensions, coordinating them with the pre-selected holder. The container with the roll is placed in a niche; only the edge of the tape remains visible from the outside. The paper passes through a hole made in the decorative trim. When the roll runs out, the hidden box is pulled out and refilled. This model saves almost 100% of usable space. Ideal for small toilets.
Wall stand
Stationary modification of the mobile floor type. Compact vertical models are especially in demand. But multifunctional horizontal racks also found their buyer.
How to mount a toilet paper holder on the wall
Floor racks for toilet paper are not fixed, built-in models are inserted into niches, and wall-mounted options require reliable installation. Its diagram is usually indicated in the instructions and varies depending on the design nuances of each model. The manufacturer also supplies the device with fasteners - the required number of brackets, dowels, and screws.
Before you begin installing the holder, carefully consider the location of its attachment, taking into account the recommendations given above. After this, you need to mark the places for drilling holes for the dowels, select a drill corresponding to their diameter and make sockets with a depth of the length of the dowel. Dowels are carefully driven into these holes. If the nest is too wide, it needs to be compacted. You can simply wrap the dowel with newsprint. After that, screws are screwed into it, attaching a bracket-bracket to them, onto which the toilet paper holder is mounted. Using a screwdriver, the device is fixed to the bracket by screwing in a screw specially designed for this purpose. After this, the holder is ready for use. There are holder designs in the form of an open rod on two brackets. For them, all this will have to be done twice.
If you need to install a regular holder on the same bracket with a metal plate cover, but you don’t know how to drill tiles or don’t want to because you just renovated the bathroom, you can try an alternative installation method - attaching the holder to mounting adhesive. This method is good because even if you make a mistake with the installation location, everything can be corrected at any time. So, in the area where you will attach the holder, thoroughly clean and degrease the tiles. Squeeze a little assembly glue onto the bracket-bracket from the tube using a special gun, distribute it over the entire surface of the bracket and press it against the wall in the intended location. After this, you need to wait until the glue dries thoroughly: leave it overnight or even for a day. After the bracket is glued to the tile, you need to place the holder on it in the same way as with traditional installation and fix it by tightening a small special screw from below. If the glue has dried well, it will hold the device on the wall quite firmly.
Vacuum suction cup holders are very easy to install. You just need to thoroughly clean the wall surface, install the suction cup in the chosen place and assemble the device on it. But there are often complaints about such holders: the devices spontaneously fall off the wall, unable to withstand the load. To prevent this from happening, you can try to moisten the wall and the inner surface of the suction cup for a tighter fit. If this doesn't help, there is a way out. It is simple and affordable - you can place the suction cup on silicone.
Squeeze the sealant onto the suction cup using a gun. If there is none, press the silicone tube from the bottom to get a small amount of sealant. Apply it to the suction cup and press it in the designated place against the wall. Excess sealant that protrudes beyond the edges of the suction cup should be carefully removed. All you have to do is wait until it dries; the drying times are indicated on the packaging of the sealant. Then you need to proceed as usual. After assembling the suction cup holder, you can use it. If you want to move the holder to another location or replace it, you will need to apply force and remove the suction cup. Silicone remaining on the tile can be removed without much difficulty.
As you can see, the way you install a toilet paper holder depends on its design, whether you have installation skills or the courage to experiment. If you are used to trusting only professionals, then this task can be easily handled by any master in the “husband for an hour” category that you come across when searching for a performer of this simple work.
For spare rolls
Toilet paper gets used up quickly. Therefore, its supply will never be superfluous on the farm. A special type of holder was created to store several rolls. It is placed next to the toilet so that the paper is always within reach. Such accessories have different designs and differ in installation location (floor or wall) .
Floor storage units are in great demand. The rolls can be strung one on top of the other on a vertical chrome-plated steel pin.
They can also be placed in aluminum bins.
A popular option is a fully enclosed cylindrical container with a lid. It protects the paper from contamination and dampness. This is an aesthetic solution for those who do not want to keep the rolls in sight.
Floor baskets look original.
In the bathroom you can install a compact metal stand for several rolls in the shape of a sheep. This spacious design also serves as interior decoration.
a suspended storage device on sale :
Moreover, it can be used at the same time as a regular holder.
Recommendations and tips
To create comfortable conditions and convenience for using the holder, you must follow the following recommendations:
- the distance on both sides from the toilet should not be less than 35-45 cm;
- maximum height – 60 cm;
- should be installed on the right side;
- the product with a lid meets all hygiene standards - the paper does not get dirty and cannot be damaged by dirty or wet hands;
- the paper is installed with the end up - it looks aesthetically pleasing, and the paper will be convenient and easier to unwind.
When choosing a paper holder, they are guided by the interior and style in which the room is decorated. If the toilet room is just about to be renovated, then use universal holders of classic colors and colors that match any design.
The method of fastening is also taken into account. It depends on a person’s preferences, since everyone chooses for themselves which holder is more convenient for them to use – wall-mounted or floor-mounted. Those who have pets or small children in the house are recommended to use wall products.
Material of manufacture
This criterion determines the strength and appearance of the product.
Plastic
The cheapest holders are made from plastic and come in a wide range of colors.
They weigh little and are easy to clean . The material is resistant to moisture, which is a big plus. Its mechanical strength depends on the quality of the plastic , and its visual characteristics are also mediocre. Often, plastic models are fragile and subject to rapid wear. It is not recommended to purchase plastic stands. It is better to buy wall-mounted or built-in models.
Tree
The wooden holder has a much more presentable appearance.
Fits well into a modern or eco-style interior.
Most types of wood are afraid of changes in humidity and temperature. Therefore, the raw material must have sufficient water-repellent properties. If it is too soft, the structure will soon rot. Preference should be given to products made from oak, larch and ash . Bamboo would also be a good option , which will bring an exotic atmosphere to the interior. Wood looks beautiful and creates a cozy atmosphere. But this is imported wood. For this reason, it is used less often than other materials.
Metal
In terms of durability , the best solution would be a metal holder.
It can be made from:
- steel coated with zinc or chrome;
- of stainless steel;
- brass;
- bronze;
- copper alloys;
- aluminum
All of these materials are the best options because they are not subject to corrosion . A chrome or galvanized accessory looks presentable. The strict and laconic appearance of such a holder will fit perfectly into the modern interior design of the bathroom.
The only point you should pay attention to when purchasing a metal dispenser made from other metals and their alloys is the quality of the anti-corrosion coating . If such processing was not performed properly and the metal itself is susceptible to corrosion, the surface of the product will soon become covered with rust.
In prestigious public restrooms, stainless steel dispensers . Such accessories are durable and solid in appearance. They can have a matte or polished surface.
Accessories for luxury toilets are made of precious metals and even encrusted with diamonds.
Forged metal is also used to make holders. It is used to create reliable structures with fancy patterns:
This metal is characterized by increased wear resistance and impact resistance. The wide popularity of such accessories is hampered by their disadvantages: the products are expensive, heavy and bulky.
Aluminum , compared to wood and forging, has a slightly lower cost. Superior to plastic in terms of strength, but the price is usually much higher. Such products have a rather interesting appearance, but their color range is somewhat limited:
Antique dispensers are usually made of bronze, ceramics, porcelain, and wood.
Antique bronze dispenser.
Best holder with lid
The most popular paper holder is equipped with a lid. It is found in almost all homes. The best model among many analogues is Del Mare . It is made of metallized plastic. The accessory saves space and harmonizes with all colors. The cost of the model is 265 rubles.
pros
- Low price.
- Ergonomic design.
Minuses
- Difficult to install.
I have three bathrooms in my house with different styles. I purchased the DelMare model for all three rooms. She fits in perfectly everywhere. A little difficult to attach, but that's not a big deal. A wonderful accessory.
Size and other criteria
The holders vary in size . Manufacturers produce dispensers for standard and extended rolls (Jumbo). The latter are designed for the following sizes:
- mini jumbo;
- midi;
- maxi.
Based on the number of rolls used, the following types of holders are distinguished:
- single;
- paired;
- triple;
- multi-roll.
The configuration can be round or square. The rectangular shape is classic.
Depending on the type of cutting toilet paper, dispensers are divided into 2 categories:
- For sheet paper . Designed for several packages. The transparent insert allows you to see the filling level.
- For roll paper.
Steps
1 Attaching a loose toilet paper holder
If you notice a loose toilet paper holder in the early stages, you can fix it in minutes using regular tools.
- 1 Inspect the back of the loose pad.
Behind it there should be a small hole into which a screw is screwed. This screw may or may not have a traditional head. - 2 Unscrew the screw by holding its edges between your index finger and thumb and very carefully turning it until it comes out.
- 3 Take the screw to a hardware store to get the correct size screwdriver and reinstall the screw. These screws may require a clock screwdriver or a small socket wrench. Each manufacturer uses different types of screws.
Color and style
A wide variety of colors and styles makes it easy to find a holder that matches the decor of the bathroom. You can choose chrome, transparent, black, white or any other color option, plain or variegated, matte or shiny surface.
The most common colors are white, black and shades of various metals.
Wooden models can be painted antique or covered with carved patterns.
Plastic analogues have the greatest variety of colors.
Manufacturers offer models designed in a certain style: retro, loft, ecological, rustic, etc.
Typical loft style.
Connoisseurs of minimalism will love the simple vertical pins attached to the wall.
Chrome plated holders are ideal for modern style toilets. Such models find universal application - apartments, commercial premises, shopping centers.
Many consumers are looking to buy a cool holder that, in addition to performing basic functions, will lift their spirits.
The design of some toilet paper holders may seem too original.
The design is selected taking into account individual preferences, stylistic and color design of the bathroom. Only in this case can you create a complete and thoughtful interior.
The “Knight” figure holder is a good idea for a gift or souvenir.
The creative accessory “Cat” will appeal to lovers of these cute pets.
Choosing a toilet paper holder
To choose a quality device, you should not only pay attention to the appearance of the device, but also take into account its other operational properties and characteristics, and do not forget about the features of your bathroom. The most important selection criterion is the material of manufacture. If you intend to use the holder for a long time, you should prefer a metal model. The plastic holder will look decent for a couple of years. Poor quality metal connections are unreliable and the coloring is uneven. The decorative coating should not be afraid of moisture - this point must be clarified in the instructions for the product or from the seller.
The shape and color of the holder must be in harmony with the design style and color scheme of the bathroom, combined with other elements of the room’s decoration: shelves, glasses for brushes, a soap dish, etc. Only if these conditions are met, the created interior will look complete and well thought out.
Special Requirements
When choosing an accessory, several factors should be taken into account . Such as: the passage of the toilet, its type (public / private), decide on the location and do not forget about those who, in fact, will use the paper.
For example, you should not buy floor structures if there are children and animals in the house.
For disabled people, a folding wall handrail with a holder is made. It is able to move from vertical to horizontal position.
The holder is self-adhesive and has suction cups - a good solution for toilets with low traffic levels.
If the private toilet is separate , you can get by with the simplest open-type model - a curved hook.
For public restrooms, models with rigid mounting are chosen. The ideal option is accessories with a mechanical dispenser (for maximum hygiene).
For a private room combined with a bathroom, it is also better to choose a closed holder. This device will protect the paper from moisture.
For restaurants, cafes and offices, an automatic device for 2-3 rolls with a built-in sensor would be a practical choice. They are equipped with a button for adjusting the tear-off length of the tape. The sensor reacts to the approach of a hand. The dispensing mechanism receives a command to rewind a piece of a certain length. There are models that operate on mains power or on batteries. The automatic dispensing system measures and cuts paper, reducing the cost of purchasing consumables by 6-8 times. The contactless dispenser ensures maximum hygiene by preventing infectious agents (viruses, bacteria, etc.) from coming into contact with the skin.
In toilets with a large flow of people, closed paper holders mounted on metal brackets would be appropriate. A good option for such places is a vandal-proof dispenser , which has a solid steel body and a seamless lid. This is protection against attempts to damage the restroom accessory. You cannot throw or pour anything into it. It mounts securely into the wall, making it difficult to steal. The kit includes a lock with a key. In this case, the roll will always be clean, and only maintenance personnel can remove it.
When arranging public toilets, you should not lose sight of such a point as the material of the product. Chrome is the leader in terms of ease of care and hygiene . In this regard, it is far superior to plastic, not to mention wood.
How to properly place the holder in the bathroom
All elements of the bathroom must be placed and installed in accordance with ergonomic requirements. According to experts, for comfortable use of the toilet between it and the walls, both on the right and on the left, the distance should not be less than 35-45 cm. The paper holder is mounted at a level of 60-70 cm from the floor surface, slightly (20-30 cm) by moving it forward. As a standard, the holder is mounted on the right side of the person sitting on the toilet. For most of us, this solution provides maximum comfort.
Open paper holder OFELIS “Glare”, 3-roll storage, chrome
If you and your household are right-handed, then it is more convenient to place the toilet paper device on the right. For left-handers, this should be the left-handed solution, but for ambidexters, any placement of the holder will be equally suitable.
There is a lot of controversy about which side to put on toilet paper - should the edge of the tape be on top or bottom. Even scientists thought about it. They are inclined to the first option - top placement. Their arguments in favor of this method are as follows:
- when placed at the top, the surface of the paper does not touch the wall, which means that fewer microbes accumulate on it;
- the tip of the tape is easier to reach;
- In this case, unwinding the tape is also more convenient, since there is more space for manual manipulation;
- children and pets will not be able to play while unwinding the roll;
- the top placement looks neater.
The last significant argument in favor of the option of placing the edge of the roll in the holder at the top is that this method is indicated as the only correct one in the patent of 1891, which enshrines the invention of toilet paper.
Homemade holder
With your own hands you can make cool holders in the form of a charming doll (the roll is put on your hands, simulating a muff) or a funny animal. This is a good alternative to store-bought products. When making such accessories, improvised means are used: steel wire, a plastic bottle, an old video cassette. Sometimes they are made from scratch (knitted cover, wood structure).
Their advantage is an original and exclusive appearance , which allows you to enliven the interior of the toilet. Another plus is saving the family budget.
On the Internet you can find master classes that describe in detail how to make a personalized (gnome, Baba Yaga, Madame Fu-Fu) or other original holder. Here are the best tips:
1. A cheap designer accessory can be made from an old children's toy with a long neck (giraffe, dinosaur).
2. From a plastic bottle . This option is unlikely to decorate the restroom, but its installation as a temporary accessory for a country toilet will be quite justified.
3. Made from PVC pipe . Three cut pieces (2 pieces of 10 cm each and 1 slightly longer than the roll) are connected into the letter “P” using corner fittings. We put flanges on the ends of the pipes and fasten the structure to the wall.
4. To make a doll you will need a pattern. The body can be made of nylon or flesh-colored fabric. Synthetic winterizer is used as a filler. The clothing is usually a robe, a scarf, cap or towel is put on the head, and slippers are put on the feet.
5. Lace attached to tape - the easiest to make, but not a very presentable option.
Best holder with shelf
The Chinese-made Swensa wall-mounted paper holder is equipped with a shelf to support a mobile phone. The material for the accessory was steel. It does not collapse and does not rust. The design is reliable and will not allow the phone to fall out. Replacing the bushing is easy and quick. Swensa holder costs only 325 rubles.
pros
- Supports smartphone.
- Compact and inexpensive item.
Minuses
- No.
Good design, no complaints. Finally my phone is in a safe place.
Equipment and price
The functionality of the holder is enhanced by additional elements. This could be another accessory for a spare roll or a hinged cover to support paper. Naturally, the cost of such products is higher than that of standard models.
Buyers appreciated the practicality of multifunctional holders . They often look for models equipped with a basket for a freshener. This option is very convenient and always relevant. You can find very budget models made of plastic:
A toilet brush is a must-have attribute of any bathroom, just like toilet paper. Therefore, the decision to produce “2 in 1” holders is dictated by logical considerations. As a rule, they are a stand. It turned out to be practical to produce vertical models in a set with a sanitary brush. The upper part of this design is usually reserved for storing paper, and the lower part for brushes. Some models are designed for only one roll, others include a compartment for spare raw materials.
You can find models equipped with a newspaper box . Such structures are also usually made floor-mounted.
If the bathroom is combined, it makes sense to buy a towel holder . There are compact models that are mounted under the cistern lid.
Convenient devices with a shelf for placing a phone , detergents and other items. Such holders are usually mounted on the wall.
There are also models with a smartphone tray . There is a saucer right below it. By pulling it towards you, you gain access to a separate compartment for storing personal hygiene items.
Also on sale you can find dispensers with a drawer for storing other personal hygiene items. In this device, toiletries do not get damp and are always at hand.
For amateurs, very unusual options - a built-in player, music speakers, an electronic clock, a calendar. Such modifications operate on batteries.
Prices for holders vary widely: from several hundred to several thousand rubles and even several tens of thousands (if we are talking about luxury products). The cheapest products for the most part turn out to be the worst in terms of quality. Having spent a large amount on purchasing a holder, you can count on it to meet your expectations.
Modifications
For paper and air freshener
Multifunctional holders are liked by customers for their practicality. Models that include a basket for air freshener are very popular - after all, this is very important in the toilet. Usually the material of manufacture is metal.
An example of a wall model of this kind is another Turkish paper holder from, called “Listik 2530”. It is similar to the product described just above, but differs in a neat basket for the air freshener attached to the left. Price – 1.24 thousand rubles.
And the German-made Swing 326E model looks very stylish. It is also made of brass, with a chrome finish. The bracket attached to the wall is connected to a curved metal rod. One part of it is used to place a paper roll, closed with a beautiful matte lid, the second ends with an openwork basket. Price – 5.1 thousand rubles.
TOP 5 DIY holders
You don't have to buy an expensive holder. The original design is easy to do yourself. Below is a list of five options:
- rustic style holder - you will need to screw two hooks and hang a rope on them;
- an unnecessary skateboard will become a creative stand, holding two rolls at once;
- the textile doll will hold the sleeve tightly;
- an old hook-shaped pipe is an excellent structure;
- knitted cases.
