✅ How to mow grass with a trimmer

A trimmer is a tool for household use, which I recommend purchasing for small garden plots. Despite its apparent simplicity, the device has some peculiarities in operation, which is why I often hear questions about how to mow with a trimmer. I suggest you understand the topic: find out what types of tools exist, how to prepare the trimmer for work, how to increase the efficiency of its use.

Source admgalich.ru

Principle of operation

If we consider the principle of operation of the trimmer, then it is similar to a manual scythe. The difference is that it is equipped with a motor, with its help the cutting element is rotated.

Manufacturing companies produce the following models of mowers:

On which a gasoline engine is installed. These garden tools have a fuel tank, this is their distinctive feature.
Devices with an electric motor. These tools are lighter because they do not have a fuel tank. But when choosing such models, you need to take into account that they require a power source to operate.

All electric scythes can be divided into those that run on batteries and models that are connected to the electrical network. Each type has its own characteristics, but they affect the power supply. If you do not take it into account, the remaining parts of the design are similar for different devices.

If you take any trimmer model, it consists of the following elements:

motor;
fuel tank (gasoline brush cutters do not have one);
levers that control the mower;
knife for cutting grass;
barbell;
a spool with a wound line used to cut grass;
protective casing;
bevel gearbox.

The engine is placed near the mowing head and can be installed from below or from above. Only those models that have a straight rod have a gearbox. If it is curved, then the main bearing becomes the connecting element. It consists of 2 bushings.

A fishing line is used as a cutting device. It can be easily replaced with steel knives and discs; they can be made of plastic or metal.

The choice of cutting element depends on how hard the grass will have to be cut. Most often, fishing line is used in the work; it is called cord. There are products of different shapes on sale; spiral and round ones are in demand among buyers.

The fishing line is wound onto a reel, it is inserted into the bobbin, while the 2 ends of the wire remain free. When the mower engine starts running, the bobbin rotates and the grass is cut with the free ends of the line.

Storing and caring for the trimmer

Gasoline trimmers require especially careful care . In addition to cleaning and lubricating cutting and rubbing surfaces from plant sap and dirt, you also need to take care of the engine. The fastest way to get clogged is the air filter. The frequency of its cleaning is approximately 10 hours. In addition, sometimes the fins of the engine cooling radiator become dirty , causing it to quickly overheat, and this can lead to it jamming. How to clean the radiator and air filter is described in the instructions for a specific gas trimmer.

Before leaving the trimmer for long-term storage at the end of the season, you should drain all fuel from it , then start the engine and wait until it stops. This guarantees the complete absence of fuel in the tank and carburetor. After the engine has cooled, you need to unscrew the spark plug, pour 30–40 ml of two-stroke oil into the cylinder, slowly turn the crankshaft using the starter cable so that it is distributed throughout all cavities inside the engine, then screw the spark plug into place. After this, you need to disassemble the rod, if it is disassembled, coat all metal parts that may rust with preservative lubricant and then store the trimmer in a place protected from moisture.

After finishing work, for electric trimmers , and to charge the battery for rechargeable ones, since it is not recommended to store the trimmer even for a very short time with a discharged battery - this leads to rapid failure. After this, you should remove the head, since you will have to clean both the protective casing and the insides of the drum itself . If this is not done, the grass juice may dry on them and cause the reel with the mechanism that fixes the fishing line to cease to function properly the next time it is started.

Preparing electric trimmers for long-term storage is much easier. The main thing is to protect them from moisture getting inside the control circuit and engine, as well as from rust on unprotected metal elements using a preservative lubricant. Be sure to charge the battery before storage, then your trimmer will be as good as new in the spring.

How to use a trimmer correctly

Garden trimmers are efficient. Beginners think that operating a lawn mower is easy because you just need to plug it in or add fuel, but this is not entirely true.

The performance of a garden tool and its service life directly depend on operating conditions. Therefore, before using the trimmer, you need to do some preparatory work.

The lawn from which the grass needs to be mowed is carefully inspected. Be sure to remove glass and large stones. If they fly out from under a running mower, they can injure a person. Wire is removed from the lawn, because it can get wrapped around the rotating element and break the mower.

After this, they proceed to installing the cutting system. There are low-power trimmers on sale that use only fishing line. It is designed for mowing succulent and soft grass. But there are models with a power of more than 1 kilowatt, on which metal knives are installed. They are used to cut thistles and other tough weeds and trim young bushes.

In order to replace the cord with knives, you need to unscrew the fastening nut and install the cutting element. Then the nut must be returned to its place and tightened with a wrench.

The operator must take care of his own safety. When mowing grass, you need to wear thick protective clothing. To protect your eyes, use special glasses; they will protect you from dust, grass and flying debris. Hands are covered with gloves.

The electric trimmer is plugged in, and battery models are charged for several hours before use. Fuel is poured into a gasoline mower.

The mower is held so that the spool or blade is parallel to the ground. When the tool is installed in the correct position, turn on the motor. After the grass is cut, the mower is turned off.

First start

Before the first start, the operator assembles the mower; the procedure is described in the instructions that come with the product.

If the trimmer is gasoline, it must be checked before use. The fuel tank is filled up to the neck.

The engine needs to get used to the fuel, so when first started it should run for several minutes without load. After this, start mowing the grass.

Run-in

Gasoline mowers must be tested before use. The operator turns on the engine and lets it idle for a while. It is necessary to ensure that the engine does not overheat, there should be no load.

When running the lawn mower, the load is increased gradually. If you start work at high speeds, the motor will not run in well, which will affect the further operation of the mower.

When starting for the first time, you should not completely exhaust the temporary resource. After the engine is idling, you can proceed to cultivating the lawn. The brush cutter should run for no more than 15 minutes, after which the motor should be turned off and allowed to cool down.

If you need to break in an electric trimmer, first assemble the braid. Then do test runs at least 3-5 times. If the engine is running well, move on to mowing. At first they work for no more than 5 minutes, then the duration of work is gradually increased.

How to put on a belt

If the tool has a shoulder mount, hang it on your shoulder before starting work. The trimmer is fixed on both shoulders if it has a backpack mount.

The model with a bicycle handle is held with 2 hands, the D-shaped handle is clasped with the palm of your hand. The belt should be worn so that it is comfortable, then your back will not get tired.

How to mow the lawn so that it is smooth

To ensure that the grass on the lawn is cut evenly, you need to lower the mower as low as possible while working. The area must be divided into squares. You need to work moving clockwise. In this case, the hay will always lie on the left, without getting in the way under your feet.

Mow for hay

It is better to mow hay not with a fishing line, but with a metal disc. The grass is cut at the root, maintaining its length as much as possible.

Mowing tall grass

If you need to mow tall grass, this is done in several passes. Treat the lawn 2-3 times. The rotating part is lowered from top to bottom, in this case the grass is not wound onto the reel.

The operator must remember that grass wound on a reel will cause the motor to overheat. If this happens, the lawn mower is turned off and the reel is cleaned.

It is most effective to mow the grass with the ends of the fishing line, rather than the entire length. In the second case, the tool works worse, and the motor may overload. If you need to trim the grass over a large area, the trimmer should be tilted towards the mowing side to increase efficiency.

Operation in wet weather

Electric mowers cannot be used in the rain, as there may be a short circuit. When the precipitation stops, you need to wait for the grass to dry.

Not all gasoline mowers are protected from moisture, so some manufacturers prohibit the use of mowers in the rain.

How to choose a garden trimmer (2019)

With the arrival of spring, many homestead owners are already beginning to think about future weed removal and lawn mowing. The appearance of a trimmer on the market has made caring for the area much easier. For those who are preparing to purchase this device for the first time, it is advisable to study its main technical characteristics so as not to make a mistake in their choice.

A trimmer is a tool for cutting grass, actually a motorized scythe with a gasoline or electric drive. It differs from a conventional hand tool not only in the obvious efficiency of the process, but also in its maneuverability - with a trimmer you can carefully remove excess vegetation in hard-to-reach places.

The device itself has a simple design, and most models, regardless of the power source, are similar in this sense.

The engine transmits torque to the cutting head, on which knives or fishing line are installed, as well as protective devices - a casing or bracket. For comfortable operation, the device has a human-sized rod.

Main characteristics

Power

The power indicator varies quite significantly in different models - from 250 to 3500 W. Before you buy a trimmer with the highest values, based on the opinion “the more powerful, the better,” think about whether you need it? For example, if the device is needed only for cutting grass in a flower bed, then high power is unnecessary. A trimmer up to 500 W . On the other hand, do not blame the manufacturer and seller if a low-power tool cannot cope with dense grass or overheats from prolonged use. Only a medium and high power model - from 500 to 1500 W - can cope with such tasks. Devices with the highest watts - from 1500 to 3500 - are useful for professional grass cutting, as well as for owners of large, varied areas where there is grass with thick stems, bushes, and small branches.

Engine location

The engine location can be top or bottom. Everything is simple here.

The lower motor is located near the ground and often forms a single unit with the cutting head. This trimmer is easier to hold in your hands, it is lighter and is perfect for women and pensioners. It is believed that a device with a lower engine is more maneuverable, which means it will mow down unnecessary grass in the most difficult to reach places. But there are also disadvantages. They should not work after rain or morning dew.

A trimmer with a top-mounted engine is more productive and durable. They can work in any weather. Yes, this tool is not so comfortable, but if you get used to it, which is helped by various belts and handles, then mowing will become easier.

Straight shaft or cable?

A shaft is installed inside the rod: a straight (rigid) shaft or a flexible shaft ( cable ). You can feel the difference between a flexible shaft and a steel shaft when you start cutting dense grass or bushes. In this case, the braking load on the gearbox increases, at which the cable collapses, and the rigid straight shaft continues to work.

If you decide to use a metal knife, then the gearbox experiences greater load than when working with fishing line. This is why flexible shaft trimmers are mostly equipped with only a line or a special set of blades. Tools with a straight shaft can be equipped with any cutting elements.

But before you start mowing, it is better to check the area, since an encounter with a stone can end badly even for a device with a rigid shaft.

Selection of equipment based on boom structure

The bar acts as a conductor that connects the cutting system to the engine. And inside there is a shaft that can be flexible or straight. The shape of the rod, accordingly, is curved or straight. The latter option, as practice shows, is more durable and reliable. However, if there are quite a lot of hard-to-reach places and heights in the area, then it is better to buy a trimmer option with a curved rod. Experts also advise paying attention to whether the bar is collapsible. In this case, it will be convenient to store it.

Types of trimmers

The device is classified according to the energy source that brings it into operation:

There is no point in saying that one type is preferable - each has its pros and cons. It will become easier to choose your model if you decide on the tasks that the trimmer will solve on your site.

Electric

The design of an electric trimmer is simple, and the difference between models can only be in the location of the engine and the presence of small devices that simplify work.

All electric electric scythes are divided into:

1. Network, powered by an electrical cable connected to a 220 V outlet.

2. Rechargeable, where the power source is lithium-ion batteries.

Corded electric trimmers have two main advantages. Firstly, they are lighter than gasoline ones, since there is no need for a fuel tank, and in general the design of an electric scythe is a little simpler than its counterpart that runs on fuel. Secondly, the electric motor does not need an additional power source - the main thing is that there is an outlet nearby.

This is where the disadvantages begin. The power cord of the electric tool is very short and you have to use an extension cord. Thus, the mowing area will be limited by its length. You are always tied to an outlet, that is, you simply do not have the opportunity to go somewhere to make hay or mow excess grass along the fence far from home. Work in the rain will also be limited.

But one more plus should be noted - environmental friendliness. There are simply no harmful emissions into the atmosphere from such a tool.

The electric type of trimmer, powered by a battery, has its advantages. First of all, there is no connection to the power cord. The trimmer has even less weight than its network counterpart. Trimming, mowing soft grass, mowing in the most inaccessible places, for example, under benches, in greenhouses, greenhouses - this is a list of jobs that a cordless tool can do perfectly.

Unfortunately, the power of such devices is low and therefore you cannot count on cutting branches and dense grass. But even a teenager can operate a cordless trimmer.

If we consider the technical characteristics, it is clear that the higher they are, the longer the device will work between charges. The battery capacity can be from 1.5 to 5 Ah, battery voltage - from 10.8 to 82 V.

It’s convenient when the kit includes not one, but two batteries - one is discharged, the other is working.

Petrol

This tool is completely independent of the energy source. He is not bothered by a cable dangling under his feet, and he does not need to constantly monitor the battery charging. At the same time, this is, as a rule, a powerful device that can perform the maximum amount of work and cope even with tough bushes without interruptions, pauses or overheating. Unlike its electric counterpart, a gasoline trimmer can be used in the rain or in the morning when the grass is covered with dew.

It just so happens that fuel-powered tools always have the engine at the top. In the few bottom-mounted models, the engine is often located on a frame equipped with wheels.

Disadvantages include more complex design and maintenance than in electric models. And, of course, the exhaust of spent fuel, which is constantly released into the atmosphere, is not very environmentally friendly.

All gasoline engines are divided into two-stroke and four-stroke . The first option is the most common.

The two-stroke engine is quite powerful, easy to repair and unpretentious in operation. Prices for tools with a similar engine are quite reasonable.

The main drawback is the preparation of the fuel mixture. You will have to carefully measure the amount of gasoline and special oil and mix it before each cycle of work, and the mixture cannot be stored for a long time, it must always be fresh.

Another point that distinguishes a two-stroke engine is its larger exhaust volume and noise level than a four-stroke engine.

Four-stroke engines are less noisy, operate smoothly and have a longer service life. In addition, it is equipped with containers for oil and gasoline, so there is no need to measure out shares of both each time the fuel runs out. Disadvantages include high cost and more complex maintenance.

Working in wet weather

If there is a need to mow with a trimmer in any weather, then it should definitely be a gasoline trimmer, since it can withstand wet weather well. Although, according to the instructions, working in the rain or on wet grass is also prohibited by some manufacturers of such gasoline-powered equipment. When choosing a trimmer, this is also worth paying attention to.

The electric motor is the most vulnerable place for moisture in cordless trimmers. Accordingly, if it is located on top, then there is less chance of moisture getting there from the grass, but it also cannot be used in rainy weather.

Electrically powered trimmers are most sensitive to moisture.

Typically, wet grass drips water onto the extension cord connectors, where an electrical arc can occur that can ignite the insulating plastic or cause a short circuit. Such a defect can be “corrected” by purchasing a new extension cord or replacing the plug, but moisture getting on the motor or control circuit leads to irreversible failure of the trimmer. In addition, working with such a tool in the rain is simply dangerous, since there is a high risk of electric shock.

additional characteristics

Type of rod

The rod can be straight or curved. Straight designs are typical for professional and farm appliances. They transfer all the weight to the cutting head of the trimmer, making it possible to cut through tough grass.

Curved rods are more ergonomic. Their maneuverability allows you to process complex, inaccessible areas. Another plus is the ability to spend less effort working with the trimmer, as it is more convenient to hold in your hands. The rod can be solid or collapsible . The latter is convenient for storage and transportation in transport.

Type of cutting element

Most trimmers are equipped with a reel with a bobbin on which fishing line . This is the main cutting element. The diameter of the fishing line varies - from 1 to 3.5 mm . The higher the value, the greater the trimmer's ability to work with dense grass. There are two line feeding options: semi-automatic, in which the spool is pressed to the ground to unwind new line, and automatic, when no effort is required from the operator. It’s just that every time you turn on the engine, the fishing line is supplied instead of the used one.

A metal three-beam knife copes with the densest and toughest thickets and is usually installed on gasoline lawn mowers.

Disc blades can handle small branches and bushes.

A plastic knife, like a fishing line, is a consumable material. This is a flexible, durable element that will not break when encountering tough grass or random stones.

Handle shape

The D or P shaped handle looks like a loop. It is convenient for cutting tall bushes and is taken with an overhand grip.

The T or U -shaped handle resembles a bicycle handlebar and is held in the same way. This handle gives the tool maneuverability, as you can use two hands. Weighty models are equipped with it.

The J -shaped handle grips as if you were mowing grass with a regular scythe.

Weight

Weight is an important factor if you are purchasing a trimmer for a person who cannot withstand both the weight and vibration of a working tool. The weight difference between the models is significant - from 2 to 9.1 kg.

Using different attachments

The answer to the question of how to use a trimmer correctly consists of several components. To quickly and efficiently mow the grass, it is important to choose the right attachment. The instruments use several types of attachments (cutting parts); they are suitable for a specific task and location of operation. The following types are possible:

Line (cord). Option for garden area and lawn with soft grass. The fishing line ensures high-quality grass cutting in places with obstacles (areas along the fence, under bushes, around trees); the unit itself is not at risk of being damaged.
Knife. Replaceable metal knives can have from two to four or more cutting surfaces (blades). The more cutting surfaces, the better the knife copes with tall grass, weeds, reeds or bushes.

Source pinimg.com

Disc knife. The disk, studded with small sharp teeth, is made of metal with carbide tips. The number of teeth ranges from 40-80 pieces; The more of them, the more effectively the tool copes with mowing a wide variety of vegetation, from weeds to small trees.
Plastic discs. Used more often on cordless trimmers, they are suitable for clearing the lawn of two-week-old grass, including burdocks; capable of mulching cut grass. I advise the owner of a unit with plastic knives to avoid contact with stones, curbs, and foundations during operation - the plastic may not survive a collision.

If you are planning to tidy up your garden area, a fishing line will suffice as a bait. For cutting grass over a large area (in the steppe, in a field), the best choice would be a fine-toothed disc or a knife with 3-4 or more planes.

Source brain.com.ua

Features of the trimmer with fishing line and cord

A trimmer is a more delicate machine than a full-fledged electric or gas mower. And a trimmer that works not with cord, but with fishing line, is an even more delicate device. A cord - essentially a wire - can damage the lower part of the trunk of young trees, which goes into the root, which cannot be said about the fishing line. If the weed stems are thick—for example, weeds that have begun to tiller—the fishing line may not have time to cut off all the weeds.

There are differences between manual and automatic grass cutting modes. The automatic trimmer throws out the line every time the motor starts.

Despite the obvious convenience, in uneven and non-standard areas, after mowing the grass in one place and moving on to another, you restart the engine. The way out is to switch to semi-automatic control: the trimmer in the working part has a separate button that is easily pressed when the drum head comes into contact with the ground. The line will immediately be thrown out of the cutting part.

The length of the fishing line should not be more than 15 cm in working condition. A longer line will get tangled, while a shorter line will not cut effectively. The optimal diameter of the fishing line is 2–3 mm.

Preparing the electric trimmer

If it is raining or has just stopped, you may get an electric shock when cutting wet grass. Before turning it on for the first time, make sure that you have assembled the device correctly - some models are delivered disassembled. Precise assembly will protect you from injury, and the unit itself will protect you from failures and sudden breakdown. Instructions for assembling the trimmer are described in the user manual.

When using an electric trimmer, charge the battery (if the device provides autonomous operation). Lubricate the mechanical gearbox with lithol or grease. If there is no battery in the device circuit , plug the plug into the outlet and start working.

Preparing the gas trimmer for work

Pour gasoline (or diesel fuel) into the tank without overfilling it. Two-stroke trimmer engines require mixing gasoline with motor oil (not automobile oil) in a ratio of 1: 32-1: 50. You need to know which oil is mixed in what proportion with gasoline specifically for your model. In four-stroke trimmers, you will need to pour oil and gasoline into separate tanks - again, according to the instructions.

Check whether the cutter (line or cord) is operational. Before starting work, hang the device on your shoulder - all trimmers require a belt.

Grasp the handle of the device as indicated in the instructions. Some trimmers are equipped with a double handle that resembles a bicycle handlebar. Now do the following:

close the air damper;
turn on the ignition circuit using the key or button;
if there is a mini booster pump on the carburetor, pump some fuel into the engine by pressing the pumping lever 3-5 times;
Pull the starter cord until there is significant resistance to its movement;
Pull the cord sharply up to 5 times.

The engine will start. When mowing grass, use safety glasses or a helmet with a mesh to prevent grass from flying towards your face.

Proper mowing of young grass

In order for the device to work at maximum efficiency and last several times longer than the warranty period, mow the grass correctly, following the following recommendations.

Do not lower the coil (drum) of the device under the very roots of the weed - the distance to the ground is at least 5 cm.
When mowing taller grass, mow the top first. Mowing the grass close to the root without removing the top of the stems will lead to tangling of the line, stopping the drum before it is forced to turn off.
Do not cut the grass against the direction of the drum.
Mow the grass located near the walls or fence of the site, used as decoration, without turning the trimmer drum too far. This will relieve the engine from overload.
Every 15 minutes of operation of the electric trimmer, it is necessary to allow the engine to cool down - at least 20 minutes are required.

But gas trimmers have a large time reserve - 50 minutes for work and 20 minutes for a break.

Solution of the problem

Even an ordinary scythe can help in this matter, but few owners today have the skills to work with it. A descendant of this tool is a trimmer, which can be powered from the mains or run on fuel. In a suburban area, a gasoline model will be more convenient, because in such conditions there is not always electricity, and the wires will not get in the way during operation.

It is only important to decide which model to prefer; the rating of trimmers will help with this. Having made the right choice, you will become the owner of equipment that will be convenient to use and will help you mow young shrubs, grass, woody growth and powerful weeds.

Mowing tall grass using a fishing line

For thick stems of grass (weeds), use a more powerful trimmer with thick fishing line. However, in areas where large weeds grow, the soil is often uneven. If it catches on clods of earth, the trimmer motor will brake sharply. If you abuse this, you can easily damage the engine. By mowing the top tier, you will see where the grass reaches its greatest length - in the deeper areas. By focusing on such “height differences”, you will even out the “mowing” of the lawn, bringing its appearance closer to ideal.

How to properly mow grass with a string trimmer

Any owner of a country house or summer cottage knows that in summer and spring it is necessary to constantly care for the lawn, otherwise it will lose its appearance and attractive appearance. Therefore, many dacha owners wonder how to properly mow the grass with a trimmer and fishing line. And before you start learning how to mow, you need to choose the right tool for the area and only then use it correctly on the lawn.

Operating a trimmer, as it may seem to many, is not a simple task, but there is nothing special (it is not complicated) if you correctly follow safety measures and know how to operate it correctly, rather than a garden tool whose cutter is a metal disk.

The content of the article:

Let's start with safety precautions

As for the protective equipment, the glasses and gloves recommended according to the instructions will not hurt at all, but the most important thing is to protect your feet. The cutting tool, especially if you mow with a gasoline trimmer with metal blades, rotating at enormous speeds, picks up debris, pebbles and cuttings of vegetation that fly away at such a speed that they can cause injury to a person. Therefore, it is advisable to work in trousers and closed shoes or boots.

What happens if you don't protect your feet?

As for ear protection, a noticeable need for this arises only for the “loudest” gas trimmer - based on a two-stroke engine. They are usually equipped with special headphones with a headband, necessary to reduce the sound pressure on the eardrums.

How to mow correctly with a line trimmer

Mowing with a mower with a line is much safer than with a trimmer equipped with a cord, but this is not always optimal or profitable. The main cutting element (mechanism) must be selected based on the garden plot and the height of the weed.

Previously, we looked at how to mow with a lawn mower in automatic or semi-automatic mode and manually. In automatic mode, the main cutting element (line) is ejected after each start of the device’s motor. On the one hand, this is very convenient, but on the other hand, it is not very economical, for example, your garden plot is of a non-standard shape - there are uneven corners, notches, and every time you move from place to place, you need to turn off the device and then turn it on again. In this case, it is best to use the second, semi-automatic option. This is when the line is fed into the trimmer by pressing a special button located at the very bottom of the drum (in the area cutting the grass). Simply press the tip on the ground and the line will be thrown out.

The necessary high-quality Radius electric welded fittings, the Engineering Networks website at ingplast.ru is ready to provide them to you. Always in stock couplings, bends, transitions, tees and much more. Affordable prices, fast delivery and favorable wholesale offers. Order RADIUS products right now and you won’t regret the quality.

If you are an operator, you must understand that the length of the tips of the cutting element (line) which is located on the drum in the extended (working) state should not exceed more than 15 cm. This length should be enough for the average power of trimmers for mowing grass.

What needs to be done to properly, easily and quickly mow the grass with a trimmer with a fishing line so that the device itself will serve you much longer than usual.

Try to keep the main drum (spool) at least 5 cm off the ground.
When mowing taller grass, mow the top first and then get to the stems to protect your unit from damage and prevent mower failure.
In the process of mowing grass, it is imperative to insert the cutting element (trimmer) in the direction in which the coil rotates.
Lawn grass, which is located near the walls of the garden plot as decoration, is best mowed using only the edges of the fishing line, so as not to overload the engine and not wear it out too much.
Every 15-20 minutes worked, give the device a “rest”.

How to mow tall grass with a line trimmer

It is advisable to mow the tall grass in your garden with a powerful trimmer using thick fishing line.
But many will most likely agree that in most cases the ground where weeds are located will certainly be uneven, as a result of which the owners of such garden plots end up with all kinds of debris and all kinds of stones. To prevent your expensive device (trimmer) from malfunctioning, it is best to mow the tall grass in two passes and quickly. Those. First of all, we cut off the entire top of the grass, identify more difficult areas to mow, and go over the mower a second time. When you are going to harvest the grass (using a trimmer) for hay, and you more or less understand the area of your plot, then you can predict the progress of mowing the grass in advance - this will make it faster, more convenient and easier for you. The main thing in such a situation is not to rush into mowing, but to approach the matter competently and with a “cool head.”

Some tips for mowing tall grass:

During the bevel process, try not to overload the mechanism.
If tall grass gets tangled in the fishing line, immediately turn off the mechanism so that the motor does not burn out.
If your trimmer runs on gasoline, cutting wet grass is strictly prohibited.

We carry out correct mowing in both cases

The device must move correctly in front of you and strictly from right to left, because the grass you mow will definitely fall onto the previously mowed area, which will give you the opportunity to initially mow the tops of the grass. Then you perform a reverse movement, due to which you will remove all remaining grass shoots.

When working with large areas of lawn, it is best to divide the work into several stages, visually dividing the area into squares. In the process of mowing the grass, you should move along the outside, which will make it possible not to trample the grass once again, without complicating the mowing procedure. To make it easier to work, it is best to move from below, walking parallel to the already processed area, and then return back.

With this approach, you can easily use a trimmer with a fishing line in the process of mowing the grass around the trees planted on the site, carefully avoiding them and without loading the device. If you mow your grass the way we recommend above, you can reduce the likelihood of grass flying all over the place, making it faster and easier to mow.

Preparing the trimmer for work

Depending on what kind of trimmer you have, you still need to prepare it before starting work. If the trimmer is electric, we need to charge it, or plug it into a 220 Volt network and start working. If you use a gasoline-powered grass trimmer, fill the tank. Depending on the design, prepare and check the cutting element. It would be a good idea to check the safety of the trimmer. When working with the device, it must be hung on the body and held correctly by the handles. Use safety glasses or a special mesh (protective) helmet when mowing.

How to make use more efficient

To make mowing effective and the result pleasing to the eye, it is not enough to know how to mow with a trimmer with a disc or with a cord. I always advise paying attention to the characteristics of the tool in advance; The following parameters may be critical for successful operation:

Power. If you are going to regularly process a large area or trim tough plants, you will need a tool with a powerful motor (at least 1 kW).

Source nh.ee

Cutting width. The parameter is in the range of 25-40 cm, and it affects performance. The larger the area, the wider the trimmer's grip should be.
Model weight. Take into account the load on your hands, because some units weigh more than 6 kg.
Mode. It can be manual, automatic and combined.
Handle type. If your site has complex terrain and many hard-to-reach areas, it is more convenient to operate the unit with a D-shaped handle. On flat ground, a T-shaped handle is convenient.

Source grounde.ru