The name of the pump directly reflects the method of its installation: the equipment is not immersed in water, but is installed next to a pond or well to make the pump easier to maintain.
The main feature of surface pumps is that they can only be used for pumping clean or slightly contaminated water.
Not only a short list of selection criteria will help you choose the right equipment, but also a rating of the best surface pumps according to the 2021 version in terms of price/quality ratio.
Rating of the TOP 15 best surface pumps of 2021
| Place | Name | Price |
| TOP 3 best surface pumps by price/quality for 2021 | ||
| 1 | GILEX Jumbo 50/28 Ch-18 | Find out the price |
| 2 | Denzel PS800X (800 W) | Find out the price |
| 3 | VORTEX ASV-1200/50N (1200 W) | Find out the price |
| TOP 3 best surface pumps for clean water | ||
| 1 | Denzel PSD800C (800 W) | Find out the price |
| 2 | VORTEX ASV-800/20CH (800 W) | Find out the price |
| 3 | Metabo P 2000 G (450 W) | Find out the price |
| TOP 3 best surface circulation pumps | ||
| 1 | Grundfos UPA 15-90 (120 W) | Find out the price |
| 2 | Wilo PB-088EA (140 W) | Find out the price |
| 3 | VORTEX Ts-25/6 (90 W) | Find out the price |
| TOP 3 best surface centrifugal pumps | ||
| 1 | KARCHER BP 3 Home (800 W) | Find out the price |
| 2 | Denzel PS1000X (1000 W) | Find out the price |
| 3 | Metabo P 3300 G (900 W) | Find out the price |
| TOP 3 best surface vortex pumps | ||
| 1 | Aquario ADB-60 (760 W) | Find out the price |
| 2 | Pedrollo PKm 60 (370 W) | Find out the price |
| 3 | UNIPUMP AUTO QB 60 (24 l) (370 W) | Find out the price |
Pedrollo PKm 60
Next in our TOP is the Pedrollo PKm 60 vortex surface pump.
It is equipped with a 370W motor. Compared to the previous heroes of the TOP, the value is small, but here the point is in the structure of the impeller, on which there is a large number of radial blades with a special profile that transmit the energy of the pumped liquid. They allow you to gradually increase the pressure of the liquid during its transition from the suction to the discharge pipe. This ensures, on the one hand, uniformity of flow and absence of pulsations, and on the other hand, high pressure. So, with a power of 370 W, this pump boasts a productivity of 40 l/min, the ability to lift water to a height of up to 40 meters and the ability to install it in a well at a depth of up to 8 meters.
Among other advantages of this pump, it is worth noting that its impeller is made of brass - this ensures a low noise level during operation and extends the service life of the device. And the body of this pump is made of cast iron and reliably protects the internal mechanisms from adverse environmental influences. But it is worth considering that the pump is sensitive to foreign particles, so I recommend taking care of filtration.
Well, in general, if you need a low-noise surface pump that will provide good performance up to 2.4 cubic meters of water per hour, then the Pedrollo PKm 60 will be an excellent option to buy.
- Type: vortex.
- Power: 370 W.
- Suction depth: 8 m.
- Water rise height: 40 m.
- Productivity: 2.4 m3/hour.
- Body material: cast iron.
How to choose a surface pump?
Surface pumps are divided into several types depending on the application. For example, garden ones are used for watering a vegetable garden or garden plants, wells are used to supply water to a house directly from a well, and drainage ones are used to pump out liquid from reservoirs or flooded rooms.
But, in addition to the scope of application, when choosing a pump, pay attention to the technical characteristics:
- Engine power . It is this that determines the performance of the equipment. In other words, the higher the power, the more water the device can pump in one hour.
- Napor . According to this criterion, the height of the water supply is implied. For domestic use, a device with a pressure of 25-30 meters will be sufficient.
- Degree of water pollution . The instructions for the pump always indicate what kind of water the device is intended for. Most surface pumps are designed for clean water only, but there are models with built-in filters that can be used for pumping moderately contaminated water.
It is also advisable to pay attention to the body of the device. It is advisable that it be made of stainless steel or plastic so that the equipment can successfully withstand accidental impacts or possible exposure to moisture.
BISON NS-M1-400-CH
Our TOP continues - BISON NS-M1-400-CH with a productivity of more than 2 cubic meters of water per hour.
This vortex surface pump will supply water from a depth of up to 8 meters and provide a pressure of up to 35 meters thanks to a 400 W motor. The motor here is single-phase and has overload protection. So you don’t have to worry that such a pump may burn out. If something goes wrong, it will simply turn off.
The advantages of this pump include its very quiet operation. It is also worth noting its compactness and low weight, which greatly simplifies its transportation, storage and installation even in limited space, and the leg mounts contribute to stability. It is also worth noting that the pump has a cast iron body, which protects the internal parts of the device from damage and ensures a long service life.
- Type: vortex.
- Power: 400 W.
- Suction depth: 8 m.
- Water rise height: 35 m.
- Productivity: 2.1 m3/hour.
- Body material: cast iron.
KARCHER BP 1 Barrel
The KARCHER BP 1 Barrel barrel pump is distinguished by its Chinese production, despite the fact that it is produced under a German brand. Despite the country of manufacture, the product is of very high quality and reliable.
The power of the KARCHER BP 1 Barrel pump is only 400 W. This is an average for such models. The device has a float to control the level. The protection system also allows you to turn off the device if necessary. It works automatically. The KARCHER BP 1 Barrel pump has a special clamp. With its help you can attach the model to the barrel.
The main advantages of the device are as follows:
The disadvantages of the device include such disadvantages as:
User comments and advice
Do you use surface pumps?
Of course! I want to try it
Valery Albertovich
In my experience, I would recommend a suction pump. In terms of power, of course, see for yourself; the price largely depends on it. If you need water for drinking and washing, that’s one thing, but for watering you need very powerful equipment. A well is an ideal option, since the time of wells has already passed. It’s time for technology to get involved in this matter, but on the other hand there are also disadvantages: there will be no light, there will be no water, which is not very good.
Sergey
When buying a pump, first of all, inquire about the availability of spare parts for this equipment. This is especially true for pumps with replaceable blades. Even if you are assured that spare parts are in stock, do not be lazy to call the warehouse. You will be surprised, but in 90% of cases they will tell you that such spare parts have not been available for a long time and are not expected. A pump that has served its intended life without the ability to replace parts or components will turn into a useless piece of iron. If you buy a pump with a float sensor designed to turn off the pump to control the water level in the excavation, be sure to use it, otherwise you risk burning the pump ahead of time.
Instead of an epilogue
When choosing a suction pump, you must always remember that it is complex technical equipment, so before purchasing you should clearly establish the purposes for which it is being purchased. Using a pump that is not suitable for a certain type of work will invariably lead to its failure. You should also pay attention to the warranty period: does it correspond to the type of equipment purchased? As a rule, it is larger for centrifugal ones, and smaller for vortex ones. It is better to buy a pump through online trading platforms, thus saving yourself from unnecessary retail markups.
Rules for choosing wisely
Before purchasing, you should read the information contained in the product data sheet. You need to be interested in the following information:
- Power and productivity - this indicator must be compared with the distance of the well from the house, the number of water distribution points and the maximum volume of water required at any given moment. Naturally, this will require precise mathematical calculations. However, by correctly calculating the required pump power, you can extend its service life, as well as avoid premature breakdowns and overheating;
- The minimum output pressure should be 0.3 Bar. Otherwise, household appliances connected to plumbing communications may fail.
- It is also necessary to correlate the capabilities of the pump with the diameter of the casing pipe installed in the well. It is better to contact the specialists who carried out the drilling with this question.
Review of popular models
The model is made of durable high quality materials. Features a silent operation mode.
RSM 5 GA
The unit has a high level of performance. The system allows you to control internal pressure.
Marina KPM 50
This model is characterized by economical operation and installation.
An automatic system will be the best solution for autonomous water supply and irrigation systems. Correct operation of the equipment and a wide range of programs will ensure a good final result.
The equipment package includes the following components:
- Control blocks
- Valves
- Branched pipelines
- Irrigation devices
A pump of this type ensures uninterrupted water supply during autonomous start-up and filling of reserves to the required level.
Advantages of devices of this sample:
Flaws:
The functionality of such systems is determined by the on and off mode.
Main characteristics of wells
When choosing a pumping station, you should consider the following well parameters:
- Static level
- Dynamic level
- Debit
- Bottom level
- Pipe diameter size
If the well owner has a technical document, then it contains all the necessary information on these criteria. If the well has not been in use for a long time, it is necessary to measure the parameters yourself.
Features of pumping equipment
Pumping stations have standard equipment. The unit consists of the following parts:
1.hydraulic accumulator, which is the main part of the device. Protects against water hammer when liquid is supplied to the tank.
2. surface pumping equipment, with the help of which water is drawn from the source.
3.an electric motor in which an electrical wire is connected to a mechanism to control the pressure.
4.monometer, which controls the pressure in the station.
5. relay that controls the pressure level. The device automatically adjusts, starts working on its own, if the pressure drops, and when it reaches the maximum, it turns off itself.
Separate room in the house
The optimal solution for a pumping station would be to use a separate room where noise will not be heard. Of course, making such a structure will not be difficult, but it will have to be heated, which entails certain costs. Considering the current cost of energy resources, it is worth understanding that this option is absolutely not suitable, since more money is spent on heating the room.
@Nasosnaya_stancia
Of course, if possible, you can install the station in the utility room. This option is possible when a well or borehole is located in close proximity to the house. A good solution for a station could be a basement, which is located below the surface of the earth.
@Nasosnaya_stancia
Firstly, the noise will be absorbed by the ground without transmitting it into the house, and secondly, at a certain depth a certain temperature always remains and the water will not be able to freeze. If you allocate a storage room for the pumping station, then in this case the room will have to be carefully soundproofed.
Interesting! We all understand that most compressor equipment produces vibration noise, which is transmitted by hard surfaces. If you isolate vibration, you can get an almost perfect silent design.
The best inexpensive pumping stations for home and garden
Inexpensive pumping stations are suitable for small houses and cottages. They will provide the kitchen, shower and bathroom with water, and will allow you to water the garden and vegetable garden in hot weather. Experts have identified several effective and reliable models.
GILEX Jumbo 70/50 N-24 (carbon steel)
Rating: 4.8
The GILEX Jumbo 70/50 N-24 pumping station is an automatic installation for a water supply system. It perfectly combines power (1.1 kW), suction depth (9 m), pressure (45 m) and productivity (3.9 cubic m/h). The station is equipped with a self-priming electric pump and a hydraulic accumulator installed horizontally. The entire structure is mounted on an adapter flange. The main parts are made of stainless steel, aluminum and durable plastic. The model becomes the winner of our rating.
Users are satisfied with the performance of the pumping station. It regularly delivers water from deep wells and boreholes, has a compact size, and has a pressure boosting function. The owners consider noisy operation to be a disadvantage.
- metal case;
- high-quality assembly;
- wide functionality;
- good pressure.
noisy work.
DENZEL PSX1300
Rating: 4.7
The most productive pumping station in the budget segment is the DENZEL PSX1300 model. The manufacturer equipped it with a powerful 1.3 kW electric motor, thanks to which a pressure of 48 m is formed. The throughput is 4.5 cubic meters. m/h, and water can be extracted from a depth of 8 m. This productivity is enough for many users to supply water to their homes, bathhouses, and also for watering their garden plots. Experts note the ease of installation and connection; the station does not make much noise during operation. The model is inferior to the rating winner only in functional equipment.
The owners of the pumping station speak flatteringly about the performance, pressure, and pressure maintenance. Another advantage is the affordable price. The built-in filter does an excellent job of purifying water.
- high power;
- silent operation;
- high-quality assembly;
- reliability and durability.
modest functionality.
VORTEX ASV-1200/50
Rating: 4.6
The VORTEX ASV-1200/50 pumping station is of great interest to domestic homeowners. In just 2 months, according to YaM data, 15,659 people were interested in it. The model has sufficient productivity to provide water to the house and water the garden in the summer. A spacious tank (50 l) allows the pump to turn on less frequently, which has a positive effect on durability. The model is equipped with automation, so it can work without prolonged human intervention. The pumping station takes third place in the ranking due to reviews from consumers who experienced unit breakdowns.
Most of the complaints come from the unreliability of the model. Some of them break down in the first days after connection.
- high-quality assembly;
- high power;
- spacious tank;
- quiet work.
- high price;
- frequent minor breakdowns.
GARDENA 3000/4 Classic (1770)
Rating: 4.5
A simple pumping station GARDENA 3000/4 Classic can provide water to a 2-storey cottage. Experts note the precise execution of all parts, as well as the high-quality assembly of the device. The model loses to the leading three in the rating in electric motor power (650 W) and throughput (2.8 cubic m/h). But the installation has small overall dimensions and low weight (12.5 kg). The manufacturer took care of extending the service life of the pumping station by installing protection against dry running and overheating. It is also worth highlighting the presence of such an option as soft engine start.
In reviews, homeowners praise the system for its light weight, quiet operation, and simple design. Disadvantages include the presence of plastic connections with delicate threads.
- ease;
- low price;
- reliable engine protection;
- smooth start.
- low power;
- flimsy plastic connections.
Quattro Elementi Automatico 1000 Inox (50 l.)
Rating: 4.5
The Quattro Elementi Automatico 1000 Inox model closes the rating of budget pumping stations. Experts include a large storage tank (50 l) and the presence of a pressure increase function as the advantages of the device. With an electric motor power of 1.0 kW, the pump is capable of lifting water from a depth of 8 m, creating a maximum pressure of 42 m. At the same time, the throughput reaches 3.3 cubic meters. m/h. The station body is made of stainless steel, which provides reliable protection against corrosion.
The model also has weaknesses. The electrical part is very sensitive to low voltage in the network (which often happens in the provinces). The unit does not like to remain in an unheated room for the winter. Owners also have serious problems with servicing foreign devices.
