Choosing the best pneumatic nailer (nailer) + VIDEO

The modern tool is designed to remove the high workload from a person, and at the same time increase the specialist’s performance several times. In the case of a nail gun, this efficiency indicator is without a doubt one of the highest. Installation of profiles for plasterboard systems, soft roofing, furniture manufacturing and other types of work with this device are more intensive and require less energy.

The review involves different types of tools for driving nails, pins or special staples. The best models of pneumatic, electric or gas pistols are presented in their respective categories. The rating position of the models is based on the characteristics of the equipment, its operating parameters and the opinions of specialists who use nailing units in their work.

Purpose and types of construction staplers

A simple and convenient construction device, which has universal connecting elements - staples, is an analogue of a conventional office stapler. But the power and productivity of the stapler allows you to solve far from office tasks. Construction staplers or, as they are also called, nail guns are used in the following cases:

• reupholstering furniture or upholstering any item with textiles;
• installation of plastic panels;
• installation of thin-layer insulation;
• fastening carpet/coverings to the floor;
• some types of facing work;
• fixation of low-current electrical and computer circuits, cables, wiring;
• assembling the back wall of furniture;
• covering frames with sheets of plywood and other materials;
• fastening of film, posters.

Each of these cases has its own specifics of operation and involves the use of certain types of construction staplers.

What types of tools are in question, and where they are best used, we will find out further.

1. Mechanical or manual stapler.

The most common type of stapler. The principle of operation is similar to the clerical one: bringing the mechanism into action using one’s own strength. The device is compact and lightweight, it is convenient to use in extreme positions and hard-to-reach places for fastening cardboard, film and similar materials, upholstering furniture, installing insulation and insulation. Disadvantage of this type of tool: it is difficult to use for a long time.

1. Electric staplers.

For a larger volume of work, a network device is used. It is more powerful than a manual one and is capable of joining hard materials and woods. Impact force can be adjusted for different surfaces. Disadvantages include high cost, weight and availability of electricity.

1. Battery analog.

Battery models do not cause inconvenience due to the built-in cord, like electrical appliances. They have high performance and work autonomously. Disadvantages include weight, cost and the need for periodic charging.

1. Pneumatic stapler.

These types of construction tools are most often used in carpentry and furniture production. Has the greatest productivity using the power of compressed air. Disadvantage: it must be connected to an expensive compressor.

Instructions: how to use a construction stapler

The advantages of the device are safety, time saving, versatility and the ability to mount in hard-to-reach places. To know how to work with a tool correctly, you need to understand the structure, type of equipment and how to insert staples.

Fastening is carried out using staples, pins or special nails. According to the operating instructions, it is necessary to use suitable fasteners and adjust the impact mechanism for the specific material. To fix the connecting element, you need to press the stapler tightly to the place where it is needed. Without lifting the tool, press the trigger lever.

Mechanical staplers have a screw. If you twist it harder, the impact force will increase, and the ejected staple will go deeper into the surface. You need to reconfigure it every time you start working with a different material. After adjustment, it is recommended to check the first blow on an unnecessary workpiece: the fasteners should fit the entire length of the legs.

Locking the trigger mechanism is required when refilling the magazine. It’s easy to learn how to charge a staple gun: move the pressing spring, like in a stationery stapler, and place the staples in a special groove, return the spring to its place. The tool is ready for use.

Choosing the right construction stapler

The device in question can be used both in large-scale production and at home. Moreover, for the home and garage it is better to buy a model of a mechanical or electrical type when frequent and long-term work is planned. In other cases, there is no point in overpaying for the tool. If the strength and energy source of the driving blow are important, then a pneumatic nail gun will do the job best. A stapler that operates on mains power can create inconvenience in small spaces due to the interfering wire. The battery does not have this drawback, but can run out at any time. Moreover, power consumption is affected not only by the duration, but also by the complexity of the work. A review of the best nail guns and staplers will show you what to look for when purchasing a tool.

BISON ZSP-2000

• Tool type – electric;
• Power – 2000 V;
• Beat frequency per minute – 20;
• Nail length – 15-30 mm;
• Staple length – 15-25 mm;
• Weight – 1.6 kg.

Let's start the review with the ZUBR ZSP-2000 model - a domestically produced nailer, which compares favorably with foreign analogues at a pleasant price, without compromising functionality and performance. The model can be used in any finishing and construction work for fastening wood, plastic and other materials. The device belongs to the universal category - it can be used to drive both nails and staples, which expands the scope of the tool.

The simple and reliable design of the device guarantees a long service life. The drive is a powerful 2000 V electric motor, powered from a household AC network. The built-in adjustment mechanism allows you to adjust the impact force based on the characteristics of the material and personal needs. A spacious magazine for 50 units of fasteners allows you to perform work with high intensity, increasing the frequency of replenishment of nail supplies. Low recoil and a comfortable handle with a special vibration-absorbing coating make using the tool simple and comfortable. It is worth noting the high safety of the instrument. There is double protection against accidental operation, which includes a main switch and a special lock that is triggered when there is no contact with the material

The manufacturer recommends operating the tool at temperatures from +5 to +40 ºС. It is forbidden to operate the device in very dusty conditions - this can lead to accelerated wear and rapid breakdown of the device. The stapler comes in a cardboard box along with a supply of staples and nails. It is worth noting that all tools of the ZUBR brand are covered by an extended five-year warranty, which confirms the quality of the products.

Choosing a compressor for a nailer

To operate, a pneumatic nailer requires a compressor, and this device must be purchased separately. When purchasing a nail gun, it is recommended that you carefully study its instructions and find out if the tool has specific requirements for the air blower.

It is better to choose a compact compressor for a nailer so as not to weigh down the structure.

Most often, nailers work with compressors up to 8 bar. Such units provide sufficient performance, but at the same time they cost quite moderately and do not look very bulky.

Best Air Nailers

Models of this type can be used in conditions of high humidity or dust. To operate, they are connected to a source of compressed air - a compressor. Pneumatic nailers are used for driving nails into hard materials, such as brick or concrete.

Fubag N90C

5

★★★★★

editorial assessment

100%

buyers recommend this product

The main feature of the Fubag pistol is its capacious magazine. Its maximum capacity is 300 nails. This allows you to work without interruption for several hours in intensive mode. High impact power makes it possible to easily penetrate durable materials.

The comfortable, ergonomically shaped handle ensures a secure grip on the tool. A special fuse ensures safety during operation. The kit includes a rapid adapter for quick connection to the compressor.

Advantages:

• maximum safety;
• durability;
• high performance;
• capacious store;
• overload protection.

Flaws:

• high price.

Fubag N90C is designed for driving CNW type nails up to 90 mm long. An ideal tool for working with thick workpieces.

Gigant NC15/50

4.9

★★★★★

editorial assessment

96%

buyers recommend this product

The engine of this model is resistant to overloads and overheating, which guarantees stable operation without failures or the need to stop. The driving depth can be adjusted using a special wheel. The non-slip coating of the grip area ensures that the gun is held securely in your hands.

The average air flow during operation is 25.5 l/min, pressure is up to 7 atmospheres. The magazine for equipment is easily removed, which allows you to quickly replenish its stock. The tool is made in a durable case that protects the main elements from damage and contamination.

Advantages:

• durability;
• ease of maintenance;
• safety;
• capacious store.

Flaws:

• large dimensions.

Gigant NC15/50 is recommended for professional use. It will be useful when performing construction and installation work.

Matrix 57410

4.9

★★★★★

editorial assessment

94%

buyers recommend this product

The handle of the model has an ergonomic shape and a non-slip coating, which ensures comfortable holding and confident operation. The tool magazine holds up to 100 parquet nails. This allows you to process a large surface area without the need to replenish the supply of hardware.

The maximum permissible pressure is 0.83 MPa, the length of the fastener can be any within the range of 10-50 mm. The ability to use different types of nails expands the scope of application of the device. The gun's weight of 1.12 kg guarantees long-term, fatigue-free operation.

Advantages:

• compact size and light weight;
• ease of holding;
• capacious store;
• work with almost any nails;
• long service life.

Flaws:

• lack of impact force adjustment.

Matrix 57410 is suitable for both home and professional use. An excellent choice for fastening boards, drywall, plywood, leather and other materials - a universal tool in every way.

Best Cordless Nailers

Such models are used for operation in the absence of power supply or compressor. They can be used to connect elements made of thin plywood, fasten finishing materials, and fittings. Cordless guns are characterized by mobility, compactness and versatility.

Ryobi ONE+ R18N18G-120S

5

★★★★★

editorial assessment

100%

buyers recommend this product

The LED backlight activation key is located on the handle, which makes it possible to activate the lighting without interrupting your work. The nail availability indicator will notify you when you need to replenish your supply.

The frequency of blows per minute is 60, the length of the fasteners can be any in the range of 15-55 mm. There is a function to prevent dry firing. Easy access to the contents of the magazine allows you to quickly remove jammed nails and load new ones.

The head is activated only upon contact with the material, which guarantees safety of use.

Advantages:

• comfort at work;
• keyless adjustment;
• safety;
• setting modes;
• light weight.

Flaws:

• high price.

The Ryobi ONE+ is designed for precision scoring. An excellent choice for finishing or decorative work.

Bosch GSK 18 V-LI

5

★★★★★

editorial assessment

97%

buyers recommend this product

The rubber-coated tip of the model ensures accurate driving of nails and eliminates the risk of damage to surfaces. A side toggle switch allows you to disable engine starting for safe disc replacement. The comfortable rubberized handle ensures a secure grip on the tool.

The Wood Protection system prevents the device from running idle if there are no nails in the magazine. The use of Bosch Electronic Cell Protection technology guarantees battery protection from deep discharge and overload.

Advantages:

• safe use;
• spacious store;
• fast charging;
• impact force adjustment.

Flaws:

• no battery included.

Bosch GSK is worth purchasing for heavy duty use. The gun is intended for professional finishing work. Buying a carcass makes sense for owners of other Bosch battery-powered equipment.

AEG B18N18-0

4.9

★★★★★

editorial assessment

94%

buyers recommend this product

The non-slip coating of the handle ensures a secure hold of the tool. It can be attached to a belt using a belt clip.

LED backlighting with independent switching will ensure comfortable work in the dark. No special wrenches are required to remove jammed nails.

The gear housing is made of magnesium alloy, which guarantees its strength and wear resistance. The owner has the ability to quickly switch between modes for precise driving or intensive use. The kit includes a case for convenient storage and transportation of the pistol.

Advantages:

• comfortable use;
• durability;
• capacious store;
• high performance;
• LED backlight.

Flaws:

• a little heavy.

AEG B18N18-0 is designed for driving nails up to 55 mm long into wood. An excellent choice for professional use.

Makita DPT353RFE

4.8

★★★★★

editorial assessment

93%

buyers recommend this product

No additional tools are required to install nails and pins into the magazine. Battery charge indicator will help you plan your working time, and protection against accidental operation is provided by a double trigger. The tool does not slip out of your hands thanks to the rubberized surface.

Nailer dimensions - 257x79x226 mm. The battery capacity is 3 Ah. It is protected from overheating, which guarantees stable operation under high load. A special suitcase will simplify the storage and transportation of the pistol along with accessories.

Advantages:

• light weight;
• long work;
• 2 batteries included;
• spacious store;
• Ease of use.

Flaws:

• noisy.

The Makita DPT353RFE is worth purchasing for installing pin nails ranging from 15mm to 35mm in length. The tool is distinguished by high precision.

READ ALSO

15 Best Air Compressors

Peculiarities

Top 10 Best Guns for Polyurethane Foam
An electric nail gun has several names, such as a nail gun, a nail gun, a nail gun, or just a nail gun. The design of the device consists of a body, a handle with a trigger, a special device called a nail magazine, and a piston that provides a pressure of 4–6 atmospheres. This is enough for the nails to firmly fit into any surface.

The piston device is activated by pressing the trigger. Simultaneously with this action, compressed air is pushed out of the handle. The nails, with some acceleration, firmly enter the base. Fasteners are not able to pass through walls. The nails themselves do not have kinetic energy, so the moment the gun stops, it also stops moving.

The only inconvenience in using a nailer is the need to purchase special nails. Regular fasteners do not fit with it.

The use of mounting guns significantly reduces the time required to complete the work and saves physical labor costs. If we are talking about large-scale work, it also significantly reduces the cost of fasteners. In addition to professionals, the gun is also actively used by home craftsmen. Features of nail guns, which are driven by compressed air, differ in the use of nails or staples.

The staple gun versions have a simpler design. Some model options are equipped with special spikes. They prevent the tool from slipping out of your hands. Other products are equipped with re-shot protection mechanisms.

Among the advantages of electric models are the following:

• light weight;
• normalized recoil force;
• ease of operation.

There are also disadvantages:

• energy dependence, which is why the tool cannot be used in buildings under construction where electricity has not yet been installed;
• low resistance to humidity;
• weak power and low speed of operations;
• The limitation in the permissible size of nails is 65 mm.

Network options are convenient for work related to the finishing of premises. Small hardware, studs or pins are convenient for securing panels and other lightweight sheet materials. When working, it is recommended to take into account the mandatory presence of an outlet for connecting the tool. The power source can be an ordinary household network of 220 volts.

Best Electric Nail Guns

Models powered by the mains can operate for a long time, as they do not depend on the battery charge level. Electric nailers can be used to solve various problems, including installation, construction, decorative and finishing work.

Metabo Ta E 3030

5

★★★★★

editorial assessment

100%

buyers recommend this product

The head guard on the tool protects the surface from dents or other damage. The additional handle provides a secure hold and allows you to accurately guide the nailer along a given path. The depth sensor eliminates the risk of multiple impacts.

The productivity of the device is up to 20 beats/min, the maximum length of nails is 30 mm. The force and frequency are automatically adjusted by the gun. If more reliable driving is needed, the operator can use the power blow function.

Advantages:

• lightweight, easy to hold;
• neat work;
• rubber tip;
• ease of maintenance.

Flaws:

• high price.

Metabo Ta E 3030 is suitable for both home craftsmen and professionals. A universal choice for renovation work.

Hammer HPE2000C Premium

4.9

★★★★★

editorial assessment

95%

buyers recommend this product

To start working, the model’s firing pin must fit tightly to the surface, which will provide protection from accidental impact. Operator safety is also guaranteed by double insulation of metal elements.

The power cable is reinforced at the point of attachment to the gun, eliminating kinks and breaks. The ventilation system helps to effectively cool the engine when operating in intensive mode.

The power of the “hammer” is 2000 W, the productivity reaches 30 beats per minute. The owner has the ability to adjust the impact force depending on the current tasks. Adjustment is carried out using a special wheel at the rear of the housing.

Advantages:

• durability;
• long cable;
• light weight;
• non-slip handles;
• durable body;
• versatility.

Flaws:

• no shock frequency adjustment.

Hammer Premium can work with staples or nails - an excellent choice for long-term use.

Patriot EN 141 The One

4.8

★★★★★

editorial assessment

88%

buyers recommend this product

The light weight and small dimensions of the model ensure ease of use for a long time. The magazine full indicator promptly alerts you to a low number of fasteners. The maximum nail length is 15 mm. The rubberized cable is resistant to negative temperatures and kinks.

Productivity - 30 beats/min. Additional operator safety is guaranteed by the engine lock button. Rubber grips on the handles help you hold the tool securely. Includes sets of 400 staples and 100 nails. The gun is ready to use right out of the box.

Advantages:

• light weight - 0.8 kg;
• reliable grip;
• compactness;
• economical energy consumption;
• ability to work with staples;
• low price.

Flaws:

• short cable.

Patriot The One is designed for driving small nails. An excellent solution for working with upholstery or plastic.

READ ALSO

10 Best Electric Spray Guns